linux-dev/drivers/media/i2c/Makefile, branch master

media: On Semi AR0521 sensor driver

2022-07-08T15:03:20Z

The driver has been extensively tested in an i.MX6-based system. AR0521 is a 5.7 mm x 4.3 mm, 5 MPix RGGB MIPI/HiSPi BSI CMOS sensor from On Semiconductor. Signed-off-by: Krzysztof Hałasa Signed-off-by: Sakari Ailus Signed-off-by: Mauro Carvalho Chehab

media: Makefiles: sort entries where it fits

2022-03-14T08:42:59Z

Alphabetically sort entries at the Makefiles per group, in ASCII order, e. g., using the output of: $ LC_ALL=C sort Makefile |grep obj-y ... $ LC_ALL=C sort Makefile |grep obj.*CONFIG ... Reviewed-by: Laurent Pinchart Signed-off-by: Mauro Carvalho Chehab

media: Makefiles: remove extra spaces

2022-03-12T15:59:52Z

It is hard to keep all those options aligned as newer config changes get added, and we really don't want to have patches adding new options also touching already existing entries. So, drop the extra spaces. Reviewed-by: Laurent Pinchart Signed-off-by: Mauro Carvalho Chehab

media: i2c: isl7998x: Add driver for Intersil ISL7998x

2022-03-03T22:27:10Z

Add driver for the Intersil ISL7998x Analog to MIPI CSI-2/BT656 decoder. This chip supports 1/2/4 analog video inputs and converts them into 1/2/4 VCs in MIPI CSI2 stream. This driver currently supports ISL79987 and both 720x480 and 720x576 resolutions, however as per specification, all inputs must use the same resolution and standard. The only supported pixel format is now YUYV/YUV422. The chip should support RGB565 on the CSI2 as well, but this is currently unsupported. Signed-off-by: Marek Vasut Cc: Sakari Ailus Cc: Mauro Carvalho Chehab Cc: Rob Herring To: linux-media@vger.kernel.org Signed-off-by: Michael Tretter Acked-by: Hans Verkuil [Sakari Ailus: Always call pm_runtime_get_and_resume in pre_streamon] Signed-off-by: Sakari Ailus

media: Add a driver for the og01a1b camera sensor

2022-03-03T22:27:05Z

Add a V4L2 sub-device driver for Omnivision og01a1b b&w image sensor. This is a camera sensor using the I2C bus for control and the CSI-2 bus for data. This driver supports following features: - manual exposure and analog/digital gain control support - vblank/hblank control support - test pattern support - media controller support - runtime PM support - support following resolutions: + 1280x1024 at 120FPS Signed-off-by: Shawn Tu [Sakari Ailus: Update according to recent v4l2-async API changes] Signed-off-by: Sakari Ailus

media: i2c: Add ov08d10 camera sensor driver

2022-01-28T18:32:49Z

Add a v4l2 sub-device driver for the OmniVision ov08d10 image sensor. This camera sensor is using the i2c bus for control and the csi-2 bus for data. The following features are supported: - manual exposure and analog/digital gain control - vblank/hblank control - test pattern - image vertical flip and horizontal mirror control - supported resolution: - 3280x2460 at 30 FPS - 3264x2448 at 30 FPS - 1632x1224 at 30 FPS - supported bayer order output: - SGRBG10 as default - SBGGR10 at flip mode - SRGGB10 at mirror mode - SGBRG10 at flip + mirror mode Signed-off-by: Jimmy Su Signed-off-by: Sakari Ailus Signed-off-by: Mauro Carvalho Chehab

media: hi847: Add support for Hi-847 sensor

2022-01-28T18:32:49Z

Add a V4L2 sub-device driver for Hynix Hi-847 image sensor. This is a camera sensor using the I2C bus for control and the CSI-2 bus for data. This driver supports following features: - manual exposure and analog/digital gain control support - vblank/hblank control support - test pattern support - media controller support - runtime PM support - vflip/hflip control support - keep SGRBG10 Bayer order output - support following resolutions: + 3264x2448 at 30FPS + 1632x1224 at 60FPS [Sakari Ailus: Wrapped a few long lines.] Signed-off-by: Shawn Tu Signed-off-by: Sakari Ailus Signed-off-by: Mauro Carvalho Chehab

media: i2c: Add support for ov5693 sensor

2021-11-30T09:50:51Z

The OV5693 is a 5 Mpx CMOS image sensor, connected via MIPI CSI-2. The chip is capable of a single lane configuration, but currently only two lanes are supported. Most of the sensor's features are supported, with the main exception being the lens correction algorithm. The driver provides all mandatory, optional and recommended V4L2 controls for maximum compatibility with libcamera. [mchehab: fixed a coding style warning] Signed-off-by: Daniel Scally Tested-by: Jean-Michel Hautbois Reviewed-by: Jean-Michel Hautbois Signed-off-by: Sakari Ailus Signed-off-by: Mauro Carvalho Chehab

media: i2c: add driver for the SK Hynix Hi-846 8M pixel camera

2021-10-08T11:23:23Z

The SK Hynix Hi-846 is a 1/4" 8M Pixel CMOS Image Sensor. It supports usual features like I2C control, CSI-2 for frame data, digital/analog gain control or test patterns. This driver supports the 640x480, 1280x720 and 1632x1224 resolution modes. It supports runtime PM in order not to draw any unnecessary power. The part is also called YACG4D0C9SHC and a datasheet can be found at https://product.skhynix.com/products/cis/cis.go The large sets of partly undocumented register values are for example found when searching for the hi846_mipi_raw_Sensor.c Android driver. Signed-off-by: Martin Kepplinger Reviewed-by: Pavel Machek Signed-off-by: Sakari Ailus Signed-off-by: Mauro Carvalho Chehab

media: Add sensor driver support for the ov13b10 camera.

2021-09-30T08:07:45Z

This driver supports following features: - phase detection auto focus (PDAF) - manual exposure and analog/digital gain control - vblank/hblank control - test pattern - image vertical flip and horizontal mirror control - 4208x3120 at 30FPS - 2080x1170 at 60FPS Signed-off-by: Arec Kao Signed-off-by: Sakari Ailus Signed-off-by: Mauro Carvalho Chehab