linux-dev/drivers/media/i2c/ccs, branch master

i2c: Make remove callback return void

2022-08-16T10:46:26Z

The value returned by an i2c driver's remove function is mostly ignored. (Only an error message is printed if the value is non-zero that the error is ignored.) So change the prototype of the remove function to return no value. This way driver authors are not tempted to assume that passing an error to the upper layer is a good idea. All drivers are adapted accordingly. There is no intended change of behaviour, all callbacks were prepared to return 0 before. Reviewed-by: Peter Senna Tschudin Reviewed-by: Jeremy Kerr Reviewed-by: Benjamin Mugnier Reviewed-by: Javier Martinez Canillas Reviewed-by: Crt Mori Reviewed-by: Heikki Krogerus Acked-by: Greg Kroah-Hartman Acked-by: Marek Behún # for leds-turris-omnia Acked-by: Andy Shevchenko Reviewed-by: Petr Machata # for mlxsw Reviewed-by: Maximilian Luz # for surface3_power Acked-by: Srinivas Pandruvada # for bmc150-accel-i2c + kxcjk-1013 Reviewed-by: Hans Verkuil # for media/* + staging/media/* Acked-by: Miguel Ojeda # for auxdisplay/ht16k33 + auxdisplay/lcd2s Reviewed-by: Luca Ceresoli # for versaclock5 Reviewed-by: Ajay Gupta # for ucsi_ccg Acked-by: Jonathan Cameron # for iio Acked-by: Peter Rosin # for i2c-mux-*, max9860 Acked-by: Adrien Grassein # for lontium-lt8912b Reviewed-by: Jean Delvare # for hwmon, i2c-core and i2c/muxes Acked-by: Corey Minyard # for IPMI Reviewed-by: Vladimir Oltean Acked-by: Dmitry Torokhov Acked-by: Sebastian Reichel # for drivers/power Acked-by: Krzysztof Hałasa Signed-off-by: Uwe Kleine-König Signed-off-by: Wolfram Sang

media: ccs-core.c: fix failure to call clk_disable_unprepare

2022-05-13T09:02:22Z

Fixes smatch warning: drivers/media/i2c/ccs/ccs-core.c:1676 ccs_power_on() warn: 'sensor->ext_clk' from clk_prepare_enable() not released on lines: 1606. Signed-off-by: Hans Verkuil Acked-by: Sakari Ailus Signed-off-by: Mauro Carvalho Chehab

media: ccs: Use unsigned int as index to an array

2022-04-24T07:01:06Z

Use an unsigned int to index an array instead of a signed one. Signed-off-by: Sakari Ailus Signed-off-by: Mauro Carvalho Chehab

media: ccs: Use %u for printing unsigned values, remove extra debug print

2022-04-24T07:00:33Z

Use %u for printing unsigned integer or u32 values. In a lot of cases %d was being used instead. Also remove an extra debug print --- the number of lanes is already printed by V4L2 when parsing fwnode endpoints when dynamic debug is enabled. Signed-off-by: Sakari Ailus Signed-off-by: Mauro Carvalho Chehab

media: Kconfig: cleanup VIDEO_DEV dependencies

2022-03-18T04:58:35Z

media Kconfig has two entries associated to V4L API: VIDEO_DEV and VIDEO_V4L2. On Kernel 2.6.x, there were two V4L APIs, each one with its own flag. VIDEO_DEV were meant to: 1) enable Video4Linux and make its Kconfig options to appear; 2) it makes the Kernel build the V4L core. while VIDEO_V4L2 where used to distinguish between drivers that implement the newer API and drivers that implemented the former one. With time, such meaning changed, specially after the removal of all V4L version 1 drivers. At the current implementation, VIDEO_DEV only does (1): it enables the media options related to V4L, that now has: menu "Video4Linux options" visible if VIDEO_DEV source "drivers/media/v4l2-core/Kconfig" endmenu but it doesn't affect anymore the V4L core drivers. The rationale is that the V4L2 core has a "soft" dependency at the I2C bus, and now requires to select a number of other Kconfig options: config VIDEO_V4L2 tristate depends on (I2C || I2C=n) && VIDEO_DEV select RATIONAL select VIDEOBUF2_V4L2 if VIDEOBUF2_CORE default (I2C || I2C=n) && VIDEO_DEV In the past, merging them would be tricky, but it seems that it is now possible to merge those symbols, in order to simplify V4L dependencies. Let's keep VIDEO_DEV, as this one is used on some make *defconfig configurations. Suggested-by: Laurent Pinchart Reviewed-by: Laurent Pinchart Reviewed-by: Jacopo Mondi Reviewed-by: Neil Armstrong # for meson-vdec & meson-ge2d Acked-by: Andrzej Pietrasiewicz Acked-by: Łukasz Stelmach Signed-off-by: Mauro Carvalho Chehab

media: i2c: ccs: Drop unused include

2022-03-03T22:27:08Z

The driver already includes which is what it uses, drop the legacy include. Cc: Sakari Ailus Signed-off-by: Linus Walleij Signed-off-by: Sakari Ailus

media: i2c: ccs: replace snprintf in show functions with sysfs_emit

2021-11-15T08:11:34Z

show() should not use snprintf() when formatting the value to be returned to user space. Fix the following coccicheck warning: drivers/media/i2c/ccs/ccs-core.c:3761: WARNING: use scnprintf or sprintf. Signed-off-by: Qing Wang Signed-off-by: Sakari Ailus Signed-off-by: Mauro Carvalho Chehab

media: ccs: Implement support for manual LP control

2021-08-04T12:43:51Z

Use the pre_streamon callback to transition the transmitter to either LP-11 or LP-111 mode if supported by the sensor. Signed-off-by: Sakari Ailus Signed-off-by: Mauro Carvalho Chehab

media: i2c: use DEVICE_ATTR_RO() helper macro

2021-08-04T12:43:50Z

Use DEVICE_ATTR_RO() helper macro instead of DEVICE_ATTR(), which is simpler and more readable. Due to the name of the read function of the sysfs attribute is normalized, there is a natural association. Signed-off-by: Zhen Lei Signed-off-by: Sakari Ailus Signed-off-by: Mauro Carvalho Chehab

media: v4l2-subdev: add subdev-wide state struct

2021-06-17T08:01:27Z

We have 'struct v4l2_subdev_pad_config' which contains configuration for a single pad used for the TRY functionality, and an array of those structs is passed to various v4l2_subdev_pad_ops. I was working on subdev internal routing between pads, and realized that there's no way to add TRY functionality for routes, which is not pad specific configuration. Adding a separate struct for try-route config wouldn't work either, as e.g. set-fmt needs to know the try-route configuration to propagate the settings. This patch adds a new struct, 'struct v4l2_subdev_state' (which at the moment only contains the v4l2_subdev_pad_config array) and the new struct is used in most of the places where v4l2_subdev_pad_config was used. All v4l2_subdev_pad_ops functions taking v4l2_subdev_pad_config are changed to instead take v4l2_subdev_state. The changes to drivers/media/v4l2-core/v4l2-subdev.c and include/media/v4l2-subdev.h were written by hand, and all the driver changes were done with the semantic patch below. The spatch needs to be applied to a select list of directories. I used the following shell commands to apply the spatch: dirs="drivers/media/i2c drivers/media/platform drivers/media/usb drivers/media/test-drivers/vimc drivers/media/pci drivers/staging/media" for dir in $dirs; do spatch -j8 --dir --include-headers --no-show-diff --in-place --sp-file v4l2-subdev-state.cocci $dir; done Note that Coccinelle chokes on a few drivers (gcc extensions?). With minor changes we can make Coccinelle run fine, and these changes can be reverted after spatch. The diff for these changes is: For drivers/media/i2c/s5k5baf.c: @@ -1481,7 +1481,7 @@ static int s5k5baf_set_selection(struct v4l2_subdev *sd, &s5k5baf_cis_rect, v4l2_subdev_get_try_crop(sd, cfg, PAD_CIS), v4l2_subdev_get_try_compose(sd, cfg, PAD_CIS), - v4l2_subdev_get_try_crop(sd, cfg, PAD_OUT) + v4l2_subdev_get_try_crop(sd, cfg, PAD_OUT), }; s5k5baf_set_rect_and_adjust(rects, rtype, &sel->r); return 0; For drivers/media/platform/s3c-camif/camif-capture.c: @@ -1230,7 +1230,7 @@ static int s3c_camif_subdev_get_fmt(struct v4l2_subdev *sd, *mf = camif->mbus_fmt; break; - case CAMIF_SD_PAD_SOURCE_C...CAMIF_SD_PAD_SOURCE_P: + case CAMIF_SD_PAD_SOURCE_C: /* crop rectangle at camera interface input */ mf->width = camif->camif_crop.width; mf->height = camif->camif_crop.height; @@ -1332,7 +1332,7 @@ static int s3c_camif_subdev_set_fmt(struct v4l2_subdev *sd, } break; - case CAMIF_SD_PAD_SOURCE_C...CAMIF_SD_PAD_SOURCE_P: + case CAMIF_SD_PAD_SOURCE_C: /* Pixel format can be only changed on the sink pad. */ mf->code = camif->mbus_fmt.code; mf->width = crop->width; The semantic patch is: // // Change function parameter @@ identifier func; identifier cfg; @@ func(..., - struct v4l2_subdev_pad_config *cfg + struct v4l2_subdev_state *sd_state , ...) { <... - cfg + sd_state ...> } // Change function declaration parameter @@ identifier func; identifier cfg; type T; @@ T func(..., - struct v4l2_subdev_pad_config *cfg + struct v4l2_subdev_state *sd_state , ...); // Change function return value @@ identifier func; @@ - struct v4l2_subdev_pad_config + struct v4l2_subdev_state *func(...) { ... } // Change function declaration return value @@ identifier func; @@ - struct v4l2_subdev_pad_config + struct v4l2_subdev_state *func(...); // Some drivers pass a local pad_cfg for a single pad to a called function. Wrap it // inside a pad_state. @@ identifier func; identifier pad_cfg; @@ func(...) { ... struct v4l2_subdev_pad_config pad_cfg; + struct v4l2_subdev_state pad_state = { .pads = &pad_cfg }; <+... ( v4l2_subdev_call | sensor_call | isi_try_fse | isc_try_fse | saa_call_all ) (..., - &pad_cfg + &pad_state ,...) ...+> } // If the function uses fields from pad_config, access via state->pads @@ identifier func; identifier state; @@ func(..., struct v4l2_subdev_state *state , ...) { <... ( - state->try_fmt + state->pads->try_fmt | - state->try_crop + state->pads->try_crop | - state->try_compose + state->pads->try_compose ) ...> } // If the function accesses the filehandle, use fh->state instead @@ struct v4l2_subdev_fh *fh; @@ - fh->pad + fh->state @@ struct v4l2_subdev_fh fh; @@ - fh.pad + fh.state // Start of vsp1 specific @@ @@ struct vsp1_entity { ... - struct v4l2_subdev_pad_config *config; + struct v4l2_subdev_state *config; ... }; @@ symbol entity; @@ vsp1_entity_init(...) { ... entity->config = - v4l2_subdev_alloc_pad_config + v4l2_subdev_alloc_state (&entity->subdev); ... } @@ symbol entity; @@ vsp1_entity_destroy(...) { ... - v4l2_subdev_free_pad_config + v4l2_subdev_free_state (entity->config); ... } @exists@ identifier func =~ "(^vsp1.*)|(hsit_set_format)|(sru_enum_frame_size)|(sru_set_format)|(uif_get_selection)|(uif_set_selection)|(uds_enum_frame_size)|(uds_set_format)|(brx_set_format)|(brx_get_selection)|(histo_get_selection)|(histo_set_selection)|(brx_set_selection)"; symbol config; @@ func(...) { ... - struct v4l2_subdev_pad_config *config; + struct v4l2_subdev_state *config; ... } // End of vsp1 specific // Start of rcar specific @@ identifier sd; identifier pad_cfg; @@ rvin_try_format(...) { ... - struct v4l2_subdev_pad_config *pad_cfg; + struct v4l2_subdev_state *sd_state; ... - pad_cfg = v4l2_subdev_alloc_pad_config(sd); + sd_state = v4l2_subdev_alloc_state(sd); <... - pad_cfg + sd_state ...> - v4l2_subdev_free_pad_config(pad_cfg); + v4l2_subdev_free_state(sd_state); ... } // End of rcar specific // Start of rockchip specific @@ identifier func =~ "(rkisp1_rsz_get_pad_fmt)|(rkisp1_rsz_get_pad_crop)|(rkisp1_rsz_register)"; symbol rsz; symbol pad_cfg; @@ func(...) { + struct v4l2_subdev_state state = { .pads = rsz->pad_cfg }; ... - rsz->pad_cfg + &state ... } @@ identifier func =~ "(rkisp1_isp_get_pad_fmt)|(rkisp1_isp_get_pad_crop)"; symbol isp; symbol pad_cfg; @@ func(...) { + struct v4l2_subdev_state state = { .pads = isp->pad_cfg }; ... - isp->pad_cfg + &state ... } @@ symbol rkisp1; symbol isp; symbol pad_cfg; @@ rkisp1_isp_register(...) { + struct v4l2_subdev_state state = { .pads = rkisp1->isp.pad_cfg }; ... - rkisp1->isp.pad_cfg + &state ... } // End of rockchip specific // Start of tegra-video specific @@ identifier sd; identifier pad_cfg; @@ __tegra_channel_try_format(...) { ... - struct v4l2_subdev_pad_config *pad_cfg; + struct v4l2_subdev_state *sd_state; ... - pad_cfg = v4l2_subdev_alloc_pad_config(sd); + sd_state = v4l2_subdev_alloc_state(sd); <... - pad_cfg + sd_state ...> - v4l2_subdev_free_pad_config(pad_cfg); + v4l2_subdev_free_state(sd_state); ... } @@ identifier sd_state; @@ __tegra_channel_try_format(...) { ... struct v4l2_subdev_state *sd_state; <... - sd_state->try_crop + sd_state->pads->try_crop ...> } // End of tegra-video specific // Signed-off-by: Tomi Valkeinen Acked-by: Laurent Pinchart Acked-by: Sakari Ailus Signed-off-by: Hans Verkuil Signed-off-by: Mauro Carvalho Chehab