linux-dev/drivers/media/i2c/mt9v032.c, branch linus/master

media: v4l2-subdev: add subdev-wide state struct

2021-06-17T08:01:27Z

We have 'struct v4l2_subdev_pad_config' which contains configuration for a single pad used for the TRY functionality, and an array of those structs is passed to various v4l2_subdev_pad_ops. I was working on subdev internal routing between pads, and realized that there's no way to add TRY functionality for routes, which is not pad specific configuration. Adding a separate struct for try-route config wouldn't work either, as e.g. set-fmt needs to know the try-route configuration to propagate the settings. This patch adds a new struct, 'struct v4l2_subdev_state' (which at the moment only contains the v4l2_subdev_pad_config array) and the new struct is used in most of the places where v4l2_subdev_pad_config was used. All v4l2_subdev_pad_ops functions taking v4l2_subdev_pad_config are changed to instead take v4l2_subdev_state. The changes to drivers/media/v4l2-core/v4l2-subdev.c and include/media/v4l2-subdev.h were written by hand, and all the driver changes were done with the semantic patch below. The spatch needs to be applied to a select list of directories. I used the following shell commands to apply the spatch: dirs="drivers/media/i2c drivers/media/platform drivers/media/usb drivers/media/test-drivers/vimc drivers/media/pci drivers/staging/media" for dir in $dirs; do spatch -j8 --dir --include-headers --no-show-diff --in-place --sp-file v4l2-subdev-state.cocci $dir; done Note that Coccinelle chokes on a few drivers (gcc extensions?). With minor changes we can make Coccinelle run fine, and these changes can be reverted after spatch. The diff for these changes is: For drivers/media/i2c/s5k5baf.c: @@ -1481,7 +1481,7 @@ static int s5k5baf_set_selection(struct v4l2_subdev *sd, &s5k5baf_cis_rect, v4l2_subdev_get_try_crop(sd, cfg, PAD_CIS), v4l2_subdev_get_try_compose(sd, cfg, PAD_CIS), - v4l2_subdev_get_try_crop(sd, cfg, PAD_OUT) + v4l2_subdev_get_try_crop(sd, cfg, PAD_OUT), }; s5k5baf_set_rect_and_adjust(rects, rtype, &sel->r); return 0; For drivers/media/platform/s3c-camif/camif-capture.c: @@ -1230,7 +1230,7 @@ static int s3c_camif_subdev_get_fmt(struct v4l2_subdev *sd, *mf = camif->mbus_fmt; break; - case CAMIF_SD_PAD_SOURCE_C...CAMIF_SD_PAD_SOURCE_P: + case CAMIF_SD_PAD_SOURCE_C: /* crop rectangle at camera interface input */ mf->width = camif->camif_crop.width; mf->height = camif->camif_crop.height; @@ -1332,7 +1332,7 @@ static int s3c_camif_subdev_set_fmt(struct v4l2_subdev *sd, } break; - case CAMIF_SD_PAD_SOURCE_C...CAMIF_SD_PAD_SOURCE_P: + case CAMIF_SD_PAD_SOURCE_C: /* Pixel format can be only changed on the sink pad. */ mf->code = camif->mbus_fmt.code; mf->width = crop->width; The semantic patch is: // // Change function parameter @@ identifier func; identifier cfg; @@ func(..., - struct v4l2_subdev_pad_config *cfg + struct v4l2_subdev_state *sd_state , ...) { <... - cfg + sd_state ...> } // Change function declaration parameter @@ identifier func; identifier cfg; type T; @@ T func(..., - struct v4l2_subdev_pad_config *cfg + struct v4l2_subdev_state *sd_state , ...); // Change function return value @@ identifier func; @@ - struct v4l2_subdev_pad_config + struct v4l2_subdev_state *func(...) { ... } // Change function declaration return value @@ identifier func; @@ - struct v4l2_subdev_pad_config + struct v4l2_subdev_state *func(...); // Some drivers pass a local pad_cfg for a single pad to a called function. Wrap it // inside a pad_state. @@ identifier func; identifier pad_cfg; @@ func(...) { ... struct v4l2_subdev_pad_config pad_cfg; + struct v4l2_subdev_state pad_state = { .pads = &pad_cfg }; <+... ( v4l2_subdev_call | sensor_call | isi_try_fse | isc_try_fse | saa_call_all ) (..., - &pad_cfg + &pad_state ,...) ...+> } // If the function uses fields from pad_config, access via state->pads @@ identifier func; identifier state; @@ func(..., struct v4l2_subdev_state *state , ...) { <... ( - state->try_fmt + state->pads->try_fmt | - state->try_crop + state->pads->try_crop | - state->try_compose + state->pads->try_compose ) ...> } // If the function accesses the filehandle, use fh->state instead @@ struct v4l2_subdev_fh *fh; @@ - fh->pad + fh->state @@ struct v4l2_subdev_fh fh; @@ - fh.pad + fh.state // Start of vsp1 specific @@ @@ struct vsp1_entity { ... - struct v4l2_subdev_pad_config *config; + struct v4l2_subdev_state *config; ... }; @@ symbol entity; @@ vsp1_entity_init(...) { ... entity->config = - v4l2_subdev_alloc_pad_config + v4l2_subdev_alloc_state (&entity->subdev); ... } @@ symbol entity; @@ vsp1_entity_destroy(...) { ... - v4l2_subdev_free_pad_config + v4l2_subdev_free_state (entity->config); ... } @exists@ identifier func =~ "(^vsp1.*)|(hsit_set_format)|(sru_enum_frame_size)|(sru_set_format)|(uif_get_selection)|(uif_set_selection)|(uds_enum_frame_size)|(uds_set_format)|(brx_set_format)|(brx_get_selection)|(histo_get_selection)|(histo_set_selection)|(brx_set_selection)"; symbol config; @@ func(...) { ... - struct v4l2_subdev_pad_config *config; + struct v4l2_subdev_state *config; ... } // End of vsp1 specific // Start of rcar specific @@ identifier sd; identifier pad_cfg; @@ rvin_try_format(...) { ... - struct v4l2_subdev_pad_config *pad_cfg; + struct v4l2_subdev_state *sd_state; ... - pad_cfg = v4l2_subdev_alloc_pad_config(sd); + sd_state = v4l2_subdev_alloc_state(sd); <... - pad_cfg + sd_state ...> - v4l2_subdev_free_pad_config(pad_cfg); + v4l2_subdev_free_state(sd_state); ... } // End of rcar specific // Start of rockchip specific @@ identifier func =~ "(rkisp1_rsz_get_pad_fmt)|(rkisp1_rsz_get_pad_crop)|(rkisp1_rsz_register)"; symbol rsz; symbol pad_cfg; @@ func(...) { + struct v4l2_subdev_state state = { .pads = rsz->pad_cfg }; ... - rsz->pad_cfg + &state ... } @@ identifier func =~ "(rkisp1_isp_get_pad_fmt)|(rkisp1_isp_get_pad_crop)"; symbol isp; symbol pad_cfg; @@ func(...) { + struct v4l2_subdev_state state = { .pads = isp->pad_cfg }; ... - isp->pad_cfg + &state ... } @@ symbol rkisp1; symbol isp; symbol pad_cfg; @@ rkisp1_isp_register(...) { + struct v4l2_subdev_state state = { .pads = rkisp1->isp.pad_cfg }; ... - rkisp1->isp.pad_cfg + &state ... } // End of rockchip specific // Start of tegra-video specific @@ identifier sd; identifier pad_cfg; @@ __tegra_channel_try_format(...) { ... - struct v4l2_subdev_pad_config *pad_cfg; + struct v4l2_subdev_state *sd_state; ... - pad_cfg = v4l2_subdev_alloc_pad_config(sd); + sd_state = v4l2_subdev_alloc_state(sd); <... - pad_cfg + sd_state ...> - v4l2_subdev_free_pad_config(pad_cfg); + v4l2_subdev_free_state(sd_state); ... } @@ identifier sd_state; @@ __tegra_channel_try_format(...) { ... struct v4l2_subdev_state *sd_state; <... - sd_state->try_crop + sd_state->pads->try_crop ...> } // End of tegra-video specific // Signed-off-by: Tomi Valkeinen Acked-by: Laurent Pinchart Acked-by: Sakari Ailus Signed-off-by: Hans Verkuil Signed-off-by: Mauro Carvalho Chehab

media: i2c: mt9v032: fix enum mbus codes and frame sizes

2020-01-04T07:09:59Z

This driver supports both the mt9v032 (color) and the mt9v022 (mono) sensors. Depending on which sensor is used, the format from the sensor is different. The format.code inside the dev struct holds this information. The enum mbus and enum frame sizes need to take into account both type of sensors, not just the color one. To solve this, use the format.code in these functions instead of the hardcoded bayer color format (which is only used for mt9v032). [Sakari Ailus: rewrapped commit message] Suggested-by: Wenyou Yang Signed-off-by: Eugen Hristev Reviewed-by: Laurent Pinchart Signed-off-by: Sakari Ailus Signed-off-by: Mauro Carvalho Chehab

treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 500

2019-06-19T15:09:55Z

Based on 2 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license version 2 as published by the free software foundation this program is free software you can redistribute it and or modify it under the terms of the gnu general public license version 2 as published by the free software foundation # extracted by the scancode license scanner the SPDX license identifier GPL-2.0-only has been chosen to replace the boilerplate/reference in 4122 file(s). Signed-off-by: Thomas Gleixner Reviewed-by: Enrico Weigelt Reviewed-by: Kate Stewart Reviewed-by: Allison Randal Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190604081206.933168790@linutronix.de Signed-off-by: Greg Kroah-Hartman

media: v4l: fwnode: Initialise the V4L2 fwnode endpoints to zero

2018-10-04T20:21:02Z

Initialise the V4L2 fwnode endpoints to zero in all drivers using v4l2_fwnode_endpoint_parse(). This prepares for setting default endpoint flags as well as the bus type. Setting bus type to zero will continue to guess the bus among the guessable set (parallel, Bt.656 and CSI-2 D-PHY). Signed-off-by: Sakari Ailus Tested-by: Steve Longerbeam Tested-by: Jacopo Mondi Signed-off-by: Mauro Carvalho Chehab

media: media/i2c: add missing entity functions

2018-07-25T12:04:00Z

Several drivers in media/i2c do not set the entity function. Correct this. Signed-off-by: Hans Verkuil Acked-by: Sakari Ailus Reviewed-by: Laurent Pinchart Signed-off-by: Mauro Carvalho Chehab

media: v4l: mt9v032: Disable clock on error paths

2017-12-08T14:24:01Z

mt9v032_power_on() leaves clk enabled in case of errors, but it is not expected by its callers. There is a similar problem in mt9v032_registered(). Found by Linux Driver Verification project (linuxtesting.org). Signed-off-by: Alexey Khoroshilov Signed-off-by: Sakari Ailus Signed-off-by: Mauro Carvalho Chehab

[media] v4l: Switch from V4L2 OF not V4L2 fwnode API

2017-06-06T12:58:16Z

Switch users of the v4l2_of_ APIs to the more generic v4l2_fwnode_ APIs. Async OF matching is replaced by fwnode matching and OF matching support is removed. Signed-off-by: Sakari Ailus Acked-by: Benoit Parrot # i2c/ov2569.c, am437x/am437x-vpfe.c and ti-vpe/cal.c Tested-by: Hans Verkuil # Atmel sama5d3 board + ov2640 sensor Tested-by: Philipp Zabel Signed-off-by: Mauro Carvalho Chehab

[media] drivers: media: i2c: constify v4l2_subdev_* structures

2017-02-03T11:23:19Z

v4l2_subdev_{core/pad/video}_ops structures are stored in the fields of the v4l2_subdev_ops structure which are of type const. Also, v4l2_subdev_ops structure is passed to a function having its argument of type const. As these structures are never modified, so declare them as const. Done using Coccinelle: (One of the scripts used) @r1 disable optional_qualifier @ identifier i; position p; @@ static struct v4l2_subdev_video_ops i@p = {...}; @ok1@ identifier r1.i; position p; struct v4l2_subdev_ops obj; @@ obj.video=&i@p; @bad@ position p!={r1.p,ok1.p}; identifier r1.i; @@ i@p @depends on !bad disable optional_qualifier@ identifier r1.i; @@ +const struct v4l2_subdev_video_ops i; File sizes before: text data bss dec hex filename 7810 736 16 8562 2172 drivers/media/i2c/mt9p031.o 9652 736 24 10412 28ac drivers/media/i2c/mt9v032.o 4613 552 20 5185 1441 drivers/media/i2c/noon010pc30.o 2615 552 8 3175 c67 drivers/media/i2c/s5k6a3.o File sizes after: text data bss dec hex filename 8322 232 16 8570 217a drivers/media/i2c/mt9p031.o 10164 232 24 10420 28b4 drivers/media/i2c/mt9v032.o 4933 232 20 5185 1441 drivers/media/i2c/noon010pc30.o 2935 232 8 3175 c67 drivers/media/i2c/s5k6a3.o Signed-off-by: Bhumika Goyal Reviewed-by: Laurent Pinchart Signed-off-by: Mauro Carvalho Chehab

[media] v4l: mt9v032: Remove unneeded gpiod NULL check

2017-01-31T13:54:15Z

The gpiod API checks for NULL descriptors, there's no need to duplicate the check in the driver. Signed-off-by: Laurent Pinchart Acked-by: Sakari Ailus Signed-off-by: Mauro Carvalho Chehab

[media] v4l: mt9v032: Add V4L2 controls for AEC and AGC

2016-06-28T11:01:51Z

This patch adds V4L2 controls for Auto Exposure Control and Auto Gain Control settings. These settings include low pass filter, update frequency of these settings and the update interval for those units. [Avoid forward declarations] [Fix 80 columns limit violation] [Rename controls to avoid underscores in names] [Fix the AEC maximum shutter width on MT9V032] Signed-off-by: Markus Pargmann Signed-off-by: Laurent Pinchart Signed-off-by: Mauro Carvalho Chehab