linux-dev/drivers/media/i2c/s5c73m3, branch master

i2c: Make remove callback return void

2022-08-16T10:46:26Z

The value returned by an i2c driver's remove function is mostly ignored. (Only an error message is printed if the value is non-zero that the error is ignored.) So change the prototype of the remove function to return no value. This way driver authors are not tempted to assume that passing an error to the upper layer is a good idea. All drivers are adapted accordingly. There is no intended change of behaviour, all callbacks were prepared to return 0 before. Reviewed-by: Peter Senna Tschudin Reviewed-by: Jeremy Kerr Reviewed-by: Benjamin Mugnier Reviewed-by: Javier Martinez Canillas Reviewed-by: Crt Mori Reviewed-by: Heikki Krogerus Acked-by: Greg Kroah-Hartman Acked-by: Marek Behún # for leds-turris-omnia Acked-by: Andy Shevchenko Reviewed-by: Petr Machata # for mlxsw Reviewed-by: Maximilian Luz # for surface3_power Acked-by: Srinivas Pandruvada # for bmc150-accel-i2c + kxcjk-1013 Reviewed-by: Hans Verkuil # for media/* + staging/media/* Acked-by: Miguel Ojeda # for auxdisplay/ht16k33 + auxdisplay/lcd2s Reviewed-by: Luca Ceresoli # for versaclock5 Reviewed-by: Ajay Gupta # for ucsi_ccg Acked-by: Jonathan Cameron # for iio Acked-by: Peter Rosin # for i2c-mux-*, max9860 Acked-by: Adrien Grassein # for lontium-lt8912b Reviewed-by: Jean Delvare # for hwmon, i2c-core and i2c/muxes Acked-by: Corey Minyard # for IPMI Reviewed-by: Vladimir Oltean Acked-by: Dmitry Torokhov Acked-by: Sebastian Reichel # for drivers/power Acked-by: Krzysztof Hałasa Signed-off-by: Uwe Kleine-König Signed-off-by: Wolfram Sang

media: s5c73m3: Drop empty spi_driver remove callback

2021-11-30T11:07:06Z

A driver with a remove callback that just returns 0 behaves identically to a driver with no remove callback at all. So simplify accordingly. Signed-off-by: Uwe Kleine-König Reviewed-by: Kieran Bingham Reviewed-by: Andrzej Hajda Signed-off-by: Hans Verkuil Signed-off-by: Mauro Carvalho Chehab

media: v4l2-subdev: add subdev-wide state struct

2021-06-17T08:01:27Z

We have 'struct v4l2_subdev_pad_config' which contains configuration for a single pad used for the TRY functionality, and an array of those structs is passed to various v4l2_subdev_pad_ops. I was working on subdev internal routing between pads, and realized that there's no way to add TRY functionality for routes, which is not pad specific configuration. Adding a separate struct for try-route config wouldn't work either, as e.g. set-fmt needs to know the try-route configuration to propagate the settings. This patch adds a new struct, 'struct v4l2_subdev_state' (which at the moment only contains the v4l2_subdev_pad_config array) and the new struct is used in most of the places where v4l2_subdev_pad_config was used. All v4l2_subdev_pad_ops functions taking v4l2_subdev_pad_config are changed to instead take v4l2_subdev_state. The changes to drivers/media/v4l2-core/v4l2-subdev.c and include/media/v4l2-subdev.h were written by hand, and all the driver changes were done with the semantic patch below. The spatch needs to be applied to a select list of directories. I used the following shell commands to apply the spatch: dirs="drivers/media/i2c drivers/media/platform drivers/media/usb drivers/media/test-drivers/vimc drivers/media/pci drivers/staging/media" for dir in $dirs; do spatch -j8 --dir --include-headers --no-show-diff --in-place --sp-file v4l2-subdev-state.cocci $dir; done Note that Coccinelle chokes on a few drivers (gcc extensions?). With minor changes we can make Coccinelle run fine, and these changes can be reverted after spatch. The diff for these changes is: For drivers/media/i2c/s5k5baf.c: @@ -1481,7 +1481,7 @@ static int s5k5baf_set_selection(struct v4l2_subdev *sd, &s5k5baf_cis_rect, v4l2_subdev_get_try_crop(sd, cfg, PAD_CIS), v4l2_subdev_get_try_compose(sd, cfg, PAD_CIS), - v4l2_subdev_get_try_crop(sd, cfg, PAD_OUT) + v4l2_subdev_get_try_crop(sd, cfg, PAD_OUT), }; s5k5baf_set_rect_and_adjust(rects, rtype, &sel->r); return 0; For drivers/media/platform/s3c-camif/camif-capture.c: @@ -1230,7 +1230,7 @@ static int s3c_camif_subdev_get_fmt(struct v4l2_subdev *sd, *mf = camif->mbus_fmt; break; - case CAMIF_SD_PAD_SOURCE_C...CAMIF_SD_PAD_SOURCE_P: + case CAMIF_SD_PAD_SOURCE_C: /* crop rectangle at camera interface input */ mf->width = camif->camif_crop.width; mf->height = camif->camif_crop.height; @@ -1332,7 +1332,7 @@ static int s3c_camif_subdev_set_fmt(struct v4l2_subdev *sd, } break; - case CAMIF_SD_PAD_SOURCE_C...CAMIF_SD_PAD_SOURCE_P: + case CAMIF_SD_PAD_SOURCE_C: /* Pixel format can be only changed on the sink pad. */ mf->code = camif->mbus_fmt.code; mf->width = crop->width; The semantic patch is: // // Change function parameter @@ identifier func; identifier cfg; @@ func(..., - struct v4l2_subdev_pad_config *cfg + struct v4l2_subdev_state *sd_state , ...) { <... - cfg + sd_state ...> } // Change function declaration parameter @@ identifier func; identifier cfg; type T; @@ T func(..., - struct v4l2_subdev_pad_config *cfg + struct v4l2_subdev_state *sd_state , ...); // Change function return value @@ identifier func; @@ - struct v4l2_subdev_pad_config + struct v4l2_subdev_state *func(...) { ... } // Change function declaration return value @@ identifier func; @@ - struct v4l2_subdev_pad_config + struct v4l2_subdev_state *func(...); // Some drivers pass a local pad_cfg for a single pad to a called function. Wrap it // inside a pad_state. @@ identifier func; identifier pad_cfg; @@ func(...) { ... struct v4l2_subdev_pad_config pad_cfg; + struct v4l2_subdev_state pad_state = { .pads = &pad_cfg }; <+... ( v4l2_subdev_call | sensor_call | isi_try_fse | isc_try_fse | saa_call_all ) (..., - &pad_cfg + &pad_state ,...) ...+> } // If the function uses fields from pad_config, access via state->pads @@ identifier func; identifier state; @@ func(..., struct v4l2_subdev_state *state , ...) { <... ( - state->try_fmt + state->pads->try_fmt | - state->try_crop + state->pads->try_crop | - state->try_compose + state->pads->try_compose ) ...> } // If the function accesses the filehandle, use fh->state instead @@ struct v4l2_subdev_fh *fh; @@ - fh->pad + fh->state @@ struct v4l2_subdev_fh fh; @@ - fh.pad + fh.state // Start of vsp1 specific @@ @@ struct vsp1_entity { ... - struct v4l2_subdev_pad_config *config; + struct v4l2_subdev_state *config; ... }; @@ symbol entity; @@ vsp1_entity_init(...) { ... entity->config = - v4l2_subdev_alloc_pad_config + v4l2_subdev_alloc_state (&entity->subdev); ... } @@ symbol entity; @@ vsp1_entity_destroy(...) { ... - v4l2_subdev_free_pad_config + v4l2_subdev_free_state (entity->config); ... } @exists@ identifier func =~ "(^vsp1.*)|(hsit_set_format)|(sru_enum_frame_size)|(sru_set_format)|(uif_get_selection)|(uif_set_selection)|(uds_enum_frame_size)|(uds_set_format)|(brx_set_format)|(brx_get_selection)|(histo_get_selection)|(histo_set_selection)|(brx_set_selection)"; symbol config; @@ func(...) { ... - struct v4l2_subdev_pad_config *config; + struct v4l2_subdev_state *config; ... } // End of vsp1 specific // Start of rcar specific @@ identifier sd; identifier pad_cfg; @@ rvin_try_format(...) { ... - struct v4l2_subdev_pad_config *pad_cfg; + struct v4l2_subdev_state *sd_state; ... - pad_cfg = v4l2_subdev_alloc_pad_config(sd); + sd_state = v4l2_subdev_alloc_state(sd); <... - pad_cfg + sd_state ...> - v4l2_subdev_free_pad_config(pad_cfg); + v4l2_subdev_free_state(sd_state); ... } // End of rcar specific // Start of rockchip specific @@ identifier func =~ "(rkisp1_rsz_get_pad_fmt)|(rkisp1_rsz_get_pad_crop)|(rkisp1_rsz_register)"; symbol rsz; symbol pad_cfg; @@ func(...) { + struct v4l2_subdev_state state = { .pads = rsz->pad_cfg }; ... - rsz->pad_cfg + &state ... } @@ identifier func =~ "(rkisp1_isp_get_pad_fmt)|(rkisp1_isp_get_pad_crop)"; symbol isp; symbol pad_cfg; @@ func(...) { + struct v4l2_subdev_state state = { .pads = isp->pad_cfg }; ... - isp->pad_cfg + &state ... } @@ symbol rkisp1; symbol isp; symbol pad_cfg; @@ rkisp1_isp_register(...) { + struct v4l2_subdev_state state = { .pads = rkisp1->isp.pad_cfg }; ... - rkisp1->isp.pad_cfg + &state ... } // End of rockchip specific // Start of tegra-video specific @@ identifier sd; identifier pad_cfg; @@ __tegra_channel_try_format(...) { ... - struct v4l2_subdev_pad_config *pad_cfg; + struct v4l2_subdev_state *sd_state; ... - pad_cfg = v4l2_subdev_alloc_pad_config(sd); + sd_state = v4l2_subdev_alloc_state(sd); <... - pad_cfg + sd_state ...> - v4l2_subdev_free_pad_config(pad_cfg); + v4l2_subdev_free_state(sd_state); ... } @@ identifier sd_state; @@ __tegra_channel_try_format(...) { ... struct v4l2_subdev_state *sd_state; <... - sd_state->try_crop + sd_state->pads->try_crop ...> } // End of tegra-video specific // Signed-off-by: Tomi Valkeinen Acked-by: Laurent Pinchart Acked-by: Sakari Ailus Signed-off-by: Hans Verkuil Signed-off-by: Mauro Carvalho Chehab

media: I2C: change 'RST' to "RSET" to fix multiple build errors

2021-05-19T07:51:39Z

The use of an enum named 'RST' conflicts with a #define macro named 'RST' in arch/mips/include/asm/mach-rc32434/rb.h. The MIPS use of RST was there first (AFAICT), so change the media/i2c/ uses of RST to be named 'RSET'. 'git grep -w RSET' does not report any naming conflicts with the new name. This fixes multiple build errors: arch/mips/include/asm/mach-rc32434/rb.h:15:14: error: expected identifier before '(' token 15 | #define RST (1 << 15) | ^ drivers/media/i2c/s5c73m3/s5c73m3.h:356:2: note: in expansion of macro 'RST' 356 | RST, | ^~~ ../arch/mips/include/asm/mach-rc32434/rb.h:15:14: error: expected identifier before '(' token 15 | #define RST (1 << 15) | ^ ../drivers/media/i2c/s5k6aa.c:180:2: note: in expansion of macro 'RST' 180 | RST, | ^~~ ../arch/mips/include/asm/mach-rc32434/rb.h:15:14: error: expected identifier before '(' token 15 | #define RST (1 << 15) | ^ ../drivers/media/i2c/s5k5baf.c:238:2: note: in expansion of macro 'RST' 238 | RST, | ^~~ and some others that I have trimmed. Fixes: cac47f1822fc ("[media] V4L: Add S5C73M3 camera driver") Fixes: 8b99312b7214 ("[media] Add v4l2 subdev driver for S5K4ECGX sensor") Fixes: 7d459937dc09 ("[media] Add driver for Samsung S5K5BAF camera sensor") Fixes: bfa8dd3a0524 ("[media] v4l: Add v4l2 subdev driver for S5K6AAFX sensor") Signed-off-by: Randy Dunlap Reported-by: kernel test robot Cc: Shawn Guo Cc: Sascha Hauer Cc: Pengutronix Kernel Team Cc: Fabio Estevam Cc: NXP Linux Team Cc: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers) Cc: Andrzej Hajda Cc: Sylwester Nawrocki Cc: Sangwook Lee Signed-off-by: Hans Verkuil Signed-off-by: Mauro Carvalho Chehab

media: Use fallthrough pseudo-keyword

2020-08-29T06:35:27Z

Replace the existing /* fall through */ comments and its variants with the new pseudo-keyword macro fallthrough[1]. Also, remove unnecessary fall-through markings when it is the case. [1] https://www.kernel.org/doc/html/v5.7/process/deprecated.html?highlight=fallthrough#implicit-switch-case-fall-through Signed-off-by: Gustavo A. R. Silva Acked-by: Sakari Ailus Signed-off-by: Hans Verkuil Signed-off-by: Mauro Carvalho Chehab

media: i2c: s5c73m3: Fix number in auto focus cluster

2020-03-12T16:22:13Z

As of `s5c73m3.h` the auto focus cluster in `s5c73m3_ctrls` has 5 and not 6 controls. Signed-off-by: Sebastian Gross Signed-off-by: Hans Verkuil Signed-off-by: Mauro Carvalho Chehab

media: i2c: s5c73m3: Convert to new i2c device probe()

2019-08-13T14:52:38Z

The I2C core framework provides a simplified probe framework from commit b8a1a4cd5a98 ("i2c: Provide a temporary .probe_new() call-back type"). This driver does not utilise the i2c_device_id table in the probe, so we can easily convert it to utilise the simplified i2c driver registration. Signed-off-by: Kieran Bingham Acked-by: Andrzej Hajda Reviewed-by: Wolfram Sang Signed-off-by: Hans Verkuil Signed-off-by: Mauro Carvalho Chehab

treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 174

2019-05-30T18:26:41Z

Based on 1 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license version 2 as published by the free software foundation this program is distributed in the hope that it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details extracted by the scancode license scanner the SPDX license identifier GPL-2.0-only has been chosen to replace the boilerplate/reference in 655 file(s). Signed-off-by: Thomas Gleixner Reviewed-by: Allison Randal Reviewed-by: Kate Stewart Reviewed-by: Richard Fontana Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190527070034.575739538@linutronix.de Signed-off-by: Greg Kroah-Hartman

treewide: Add SPDX license identifier - Makefile/Kconfig

2019-05-21T08:50:46Z

Add SPDX license identifiers to all Make/Kconfig files which: - Have no license information of any form These files fall under the project license, GPL v2 only. The resulting SPDX license identifier is: GPL-2.0-only Signed-off-by: Thomas Gleixner Signed-off-by: Greg Kroah-Hartman

media: i2c: fix several typos

2019-03-01T14:29:58Z

Use codespell to fix lots of typos over frontends. Manually verified to avoid false-positives. Signed-off-by: Mauro Carvalho Chehab Acked-by: Sakari Ailus Signed-off-by: Mauro Carvalho Chehab