linux-dev/drivers/media/pci/ngene, branch master

media: media/pci/ngene/ngene.h: remove #ifdef NGENE_V4L

2022-08-29T13:37:30Z

Remove the dead code under NGENE_V4L. Among others, this removes references to the old videobuf framework that isn't actually used by this driver. Signed-off-by: Hans Verkuil Signed-off-by: Mauro Carvalho Chehab

media: ngene: Fix out-of-bounds bug in ngene_command_config_free_buf()

2021-07-20T00:33:46Z

Fix an 11-year old bug in ngene_command_config_free_buf() while addressing the following warnings caught with -Warray-bounds: arch/alpha/include/asm/string.h:22:16: warning: '__builtin_memcpy' offset [12, 16] from the object at 'com' is out of the bounds of referenced subobject 'config' with type 'unsigned char' at offset 10 [-Warray-bounds] arch/x86/include/asm/string_32.h:182:25: warning: '__builtin_memcpy' offset [12, 16] from the object at 'com' is out of the bounds of referenced subobject 'config' with type 'unsigned char' at offset 10 [-Warray-bounds] The problem is that the original code is trying to copy 6 bytes of data into a one-byte size member _config_ of the wrong structue FW_CONFIGURE_BUFFERS, in a single call to memcpy(). This causes a legitimate compiler warning because memcpy() overruns the length of &com.cmd.ConfigureBuffers.config. It seems that the right structure is FW_CONFIGURE_FREE_BUFFERS, instead, because it contains 6 more members apart from the header _hdr_. Also, the name of the function ngene_command_config_free_buf() suggests that the actual intention is to ConfigureFreeBuffers, instead of ConfigureBuffers (which takes place in the function ngene_command_config_buf(), above). Fix this by enclosing those 6 members of struct FW_CONFIGURE_FREE_BUFFERS into new struct config, and use &com.cmd.ConfigureFreeBuffers.config as the destination address, instead of &com.cmd.ConfigureBuffers.config, when calling memcpy(). This also helps with the ongoing efforts to globally enable -Warray-bounds and get us closer to being able to tighten the FORTIFY_SOURCE routines on memcpy(). Link: https://github.com/KSPP/linux/issues/109 Fixes: dae52d009fc9 ("V4L/DVB: ngene: Initial check-in") Cc: stable@vger.kernel.org Reported-by: kernel test robot Reviewed-by: Kees Cook Signed-off-by: Gustavo A. R. Silva Link: https://lore.kernel.org/linux-hardening/20210420001631.GA45456@embeddedor/

media: ngene: switch from 'pci_' to 'dma_' API

2021-03-11T10:59:46Z

The wrappers in include/linux/pci-dma-compat.h should go away. The patch has been generated with the coccinelle script below and has been hand modified to replace GFP_ with a correct flag. It has been compile tested. When memory is allocated, GFP_KERNEL can be used because in all cases, it is called from a probe function and no lock is taken in the between. The call chain is: ngene_probe (probe function, used in ngene-cards.c) --> ngene_get_buffers --> AllocCommonBuffers (call dma_alloc_coherent) --> create_ring_buffer (call dma_alloc_coherent) --> AllocateRingBuffers (call dma_alloc_coherent) @@ @@ - PCI_DMA_BIDIRECTIONAL + DMA_BIDIRECTIONAL @@ @@ - PCI_DMA_TODEVICE + DMA_TO_DEVICE @@ @@ - PCI_DMA_FROMDEVICE + DMA_FROM_DEVICE @@ @@ - PCI_DMA_NONE + DMA_NONE @@ expression e1, e2, e3; @@ - pci_alloc_consistent(e1, e2, e3) + dma_alloc_coherent(&e1->dev, e2, e3, GFP_) @@ expression e1, e2, e3; @@ - pci_zalloc_consistent(e1, e2, e3) + dma_alloc_coherent(&e1->dev, e2, e3, GFP_) @@ expression e1, e2, e3, e4; @@ - pci_free_consistent(e1, e2, e3, e4) + dma_free_coherent(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_map_single(e1, e2, e3, e4) + dma_map_single(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_unmap_single(e1, e2, e3, e4) + dma_unmap_single(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4, e5; @@ - pci_map_page(e1, e2, e3, e4, e5) + dma_map_page(&e1->dev, e2, e3, e4, e5) @@ expression e1, e2, e3, e4; @@ - pci_unmap_page(e1, e2, e3, e4) + dma_unmap_page(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_map_sg(e1, e2, e3, e4) + dma_map_sg(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_unmap_sg(e1, e2, e3, e4) + dma_unmap_sg(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_dma_sync_single_for_cpu(e1, e2, e3, e4) + dma_sync_single_for_cpu(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_dma_sync_single_for_device(e1, e2, e3, e4) + dma_sync_single_for_device(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_dma_sync_sg_for_cpu(e1, e2, e3, e4) + dma_sync_sg_for_cpu(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_dma_sync_sg_for_device(e1, e2, e3, e4) + dma_sync_sg_for_device(&e1->dev, e2, e3, e4) @@ expression e1, e2; @@ - pci_dma_mapping_error(e1, e2) + dma_mapping_error(&e1->dev, e2) @@ expression e1, e2; @@ - pci_set_dma_mask(e1, e2) + dma_set_mask(&e1->dev, e2) @@ expression e1, e2; @@ - pci_set_consistent_dma_mask(e1, e2) + dma_set_coherent_mask(&e1->dev, e2) Signed-off-by: Christophe JAILLET Signed-off-by: Hans Verkuil Signed-off-by: Mauro Carvalho Chehab

media: ngene: simplify the return expression of eeprom_write_ushort()

2021-03-11T10:59:45Z

Simplify the return expression. Signed-off-by: Qinglang Miao Signed-off-by: Hans Verkuil Signed-off-by: Mauro Carvalho Chehab

media: ngene: convert tasklets to use new tasklet_setup() API

2020-08-29T06:11:47Z

In preparation for unconditionally passing the struct tasklet_struct pointer to all tasklet callbacks, switch to using the new tasklet_setup() and from_tasklet() to pass the tasklet pointer explicitly. Signed-off-by: Romain Perier Signed-off-by: Allen Pais Signed-off-by: Hans Verkuil Signed-off-by: Mauro Carvalho Chehab

PCI: Use 'pci_channel_state_t' instead of 'enum pci_channel_state'

2020-07-07T22:11:52Z

The method struct pci_error_handlers.error_detected() is defined and documented as taking an 'enum pci_channel_state' for the second argument, but most drivers use 'pci_channel_state_t' instead. This 'pci_channel_state_t' is not a typedef for the enum but a typedef for a bitwise type in order to have better/stricter typechecking. Consolidate everything by using 'pci_channel_state_t' in the method's definition, in the related helpers and in the drivers. Enforce use of 'pci_channel_state_t' by replacing 'enum pci_channel_state' with an anonymous 'enum'. Note: Currently, from a typechecking point of view this patch changes nothing because only the constants defined by the enum are bitwise, not the enum itself (sparse doesn't have the notion of 'bitwise enum'). This may change in some not too far future, hence the patch. [bhelgaas: squash in https://lore.kernel.org/r/20200702162651.49526-3-luc.vanoostenryck@gmail.com https://lore.kernel.org/r/20200702162651.49526-4-luc.vanoostenryck@gmail.com] Link: https://lore.kernel.org/r/20200702162651.49526-2-luc.vanoostenryck@gmail.com Signed-off-by: Luc Van Oostenryck Signed-off-by: Bjorn Helgaas

media: ngene: Remove call to memset after pci_alloc_consistent

2019-08-13T14:54:39Z

pci_alloc_consistent calls dma_alloc_coherent directly. In commit 518a2f1925c3 ("dma-mapping: zero memory returned from dma_alloc_*"), dma_alloc_coherent has already zeroed the memory. So memset is not needed. Signed-off-by: Fuqian Huang Signed-off-by: Hans Verkuil Signed-off-by: Mauro Carvalho Chehab

treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 461

2019-06-19T15:09:09Z

Based on 1 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license version 2 only as published by the free software foundation this program is distributed in the hope that it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details to obtain the license point your browser to http www gnu org copyleft gpl html extracted by the scancode license scanner the SPDX license identifier GPL-2.0-only has been chosen to replace the boilerplate/reference in 12 file(s). Signed-off-by: Thomas Gleixner Reviewed-by: Allison Randal Reviewed-by: Enrico Weigelt Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190604081202.028166291@linutronix.de Signed-off-by: Greg Kroah-Hartman

treewide: Add SPDX license identifier - Makefile/Kconfig

2019-05-21T08:50:46Z

Add SPDX license identifiers to all Make/Kconfig files which: - Have no license information of any form These files fall under the project license, GPL v2 only. The resulting SPDX license identifier is: GPL-2.0-only Signed-off-by: Thomas Gleixner Signed-off-by: Greg Kroah-Hartman

media: prefix header search paths with $(srctree)/

2019-05-18T02:49:56Z

Currently, the Kbuild core manipulates header search paths in a crazy way [1]. To fix this mess, I want all Makefiles to add explicit $(srctree)/ to the search paths in the srctree. Some Makefiles are already written in that way, but not all. The goal of this work is to make the notation consistent, and finally get rid of the gross hacks. Having whitespaces after -I does not matter since commit 48f6e3cf5bc6 ("kbuild: do not drop -I without parameter"). [1]: https://patchwork.kernel.org/patch/9632347/ Signed-off-by: Masahiro Yamada Reviewed-by: Sakari Ailus