linux-dev/drivers/media/platform/vivid, branch master

media: split test drivers from platform directory

2020-04-14T08:29:04Z

When the first test device was added (vivi.c), there were just one file. I was too lazy on that time to create a separate directory just for it, so I kept it together with platform. Now, we have vivid, vicodec, vim2m and vimc. Also, a new virtual driver has been prepared to support DVB API. So, it is time to solve this mess, by placing test stuff on a separate directory. It should be noticed that we also have some skeleton drivers (for V4L and for DVB). For now, we'll keep them separate, as they're not really test drivers, but instead, just examples. The DVB frontend ones will likely be part of a new DVB test driver. By that time, it should make sense to move them here as well. Signed-off-by: Mauro Carvalho Chehab

media: vivid: fix incorrect PA assignment to HDMI outputs

2020-03-24T16:06:24Z

The initial physical address was one too low for the outputs. E.g. if 1.0.0.0 was expected, then it was set to 0.0.0.0, and 2.0.0.0 became 1.0.0.0. Signed-off-by: Hans Verkuil Cc: Johan Korsnes Fixes: 4ee895e71abb ("media: vivid: reorder CEC allocation and control set-up") Signed-off-by: Mauro Carvalho Chehab

media: media/platform: rename VFL_TYPE_GRABBER to _VIDEO

2020-02-24T15:54:14Z

'GRABBER' is a weird name, all other types map to the /dev device names. Rename to 'VIDEO' to be consistent with the other types. Signed-off-by: Hans Verkuil Signed-off-by: Mauro Carvalho Chehab

Merge tag 'media/v5.6-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media

2020-01-31T22:43:23Z

Pull media updates from Mauro Carvalho Chehab: - New staging driver for Rockship ISPv1 unit - New staging driver for Rockchip MIPI Synopsys DPHY RX0 - y2038 fixes at V4L2 API (backward-compatible) - A dvb core fix when receiving invalid EIT sections - Some clang-specific warnings got fixed - Added support for touch V4L2 interface at vivid - Several drivers were converted to use the new i2c_new_scanned_device() kAPI - Added sm1 support at meson's vdec driver - Several other driver cleanups, fixes and improvements * tag 'media/v5.6-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (207 commits) media: staging/intel-ipu3: remove TODO item about acronyms media: v4l2-fwnode: Print the node name while parsing endpoints media: Revert "media: staging/intel-ipu3: make imgu use fixed running mode" media: mt9v111: constify copied structure media: platform: VIDEO_MEDIATEK_JPEG can also depend on MTK_IOMMU media: uvcvideo: Add a quirk to force GEO GC6500 Camera bits-per-pixel value media: uvcvideo: Avoid cyclic entity chains due to malformed USB descriptors media: hantro: fix post-processing NULL pointer dereference media: rcar-vin: Use correct pixel format when aligning format media: MAINTAINERS: add entry for Rockchip ISP1 driver media: staging: rkisp1: add TODO file for staging media: staging: rkisp1: add document for rkisp1 meta buffer format media: staging: rkisp1: add output device for parameters media: staging: rkisp1: add capture device for statistics media: staging: rkisp1: add user space ABI definitions media: staging: rkisp1: add streaming paths media: staging: rkisp1: add Rockchip ISP1 base driver media: staging: phy-rockchip-dphy-rx0: add Rockchip MIPI Synopsys DPHY RX0 driver media: staging: dt-bindings: add Rockchip MIPI RX D-PHY RX0 yaml bindings media: staging: dt-bindings: add Rockchip ISP1 yaml bindings ...

Merge tag 'drm-misc-next-2019-12-16' of git://anongit.freedesktop.org/drm/drm-misc into drm-next

2019-12-17T12:57:54Z

drm-misc-next for v5.6: UAPI Changes: - Add support for DMA-BUF HEAPS. Cross-subsystem Changes: - mipi dsi definition updates, pulled into drm-intel as well. - Add lockdep annotations for dma_resv vs mmap_sem and fs_reclaim. - Remove support for dma-buf kmap/kunmap. - Constify fb_ops in all fbdev drivers, including drm drivers and drm-core, and media as well. Core Changes: - Small cleanups to ttm. - Fix SCDC definition. - Assorted cleanups to core. - Add todo to remove load/unload hooks, and use generic fbdev emulation. - Assorted documentation updates. - Use blocking ww lock in ttm fault handler. - Remove drm_fb_helper_fbdev_setup/teardown. - Warning fixes with W=1 for atomic. - Use drm_debug_enabled() instead of drm_debug flag testing in various drivers. - Fallback to nontiled mode in fbdev emulation when not all tiles are present. (Later on reverted) - Various kconfig indentation fixes in core and drivers. - Fix freeing transactions in dp-mst correctly. - Sean Paul is steping down as core maintainer. :-( - Add lockdep annotations for atomic locks vs dma-resv. - Prevent use-after-free for a bad job in drm_scheduler. - Fill out all block sizes in the P01x and P210 definitions. - Avoid division by zero in drm/rect, and fix bounds. - Add drm/rect selftests. - Add aspect ratio and alternate clocks for HDMI 4k modes. - Add todo for drm_framebuffer_funcs and fb_create cleanup. - Drop DRM_AUTH for prime import/export ioctls. - Clear DP-MST payload id tables downstream when initializating. - Fix for DSC throughput definition. - Add extra FEC definitions. - Fix fake offset in drm_gem_object_funs.mmap. - Stop using encoder->bridge in core directly - Handle bridge chaining slightly better. - Add backlight support to drm/panel, and use it in many panel drivers. - Increase max number of y420 modes from 128 to 256, as preparation to add the new modes. Driver Changes: - Small fixes all over. - Fix documentation in vkms. - Fix mmap_sem vs dma_resv in nouveau. - Small cleanup in komeda. - Add page flip support in gma500 for psb/cdv. - Add ddc symlink in the connector sysfs directory for many drivers. - Add support for analogic an6345, and fix small bugs in it. - Add atomic modesetting support to ast. - Fix radeon fault handler VMA race. - Switch udl to use generic shmem helpers. - Unconditional vblank handling for mcde. - Miscellaneous fixes to mcde. - Tweak debug output from komeda using debugfs. - Add gamma and color transform support to komeda for DOU-IPS. - Add support for sony acx424AKP panel. - Various small cleanups to gma500. - Use generic fbdev emulation in udl, and replace udl_framebuffer with generic implementation. - Add support for Logic PD Type 28 panel. - Use drm_panel_* wrapper functions in exynos/tegra/msm. - Add devicetree bindings for generic DSI panels. - Don't include drm_pci.h directly in many drivers. - Add support for begin/end_cpu_access in udmabuf. - Stop using drm_get_pci_dev in gma500 and mga200. - Fixes to UDL damage handling, and use dma_buf_begin/end_cpu_access. - Add devfreq thermal support to panfrost. - Fix hotplug with daisy chained monitors by removing VCPI when disabling topology manager. - meson: Add support for OSD1 plane AFBC commit. - Stop displaying garbage when toggling ast primary plane on/off. - More cleanups and fixes to UDL. - Add D32 suport to komeda. - Remove globle copy of drm_dev in gma500. - Add support for Boe Himax8279d MIPI-DSI LCD panel. - Add support for ingenic JZ4770 panel. - Small null pointer deference fix in ingenic. - Remove support for the special tfp420 driver, as there is a generic way to do it. Signed-off-by: Daniel Vetter From: Maarten Lankhorst Link: https://patchwork.freedesktop.org/patch/msgid/ba73535a-9334-5302-2e1f-5208bd7390bd@linux.intel.com

media: vivid: support multiplanar touch devices

2019-12-16T12:24:16Z

The v4l2-compliance tests failed with the touch device when multiplanar was enabled in vivid. Since it is perfectly fine to support the multiplanar API for touch, add support for this in vivid. Signed-off-by: Hans Verkuil Signed-off-by: Mauro Carvalho Chehab

media: vivid: set field to NONE for touch

2019-12-16T12:23:02Z

The v4l2_buffer's 'field' value was never initialized in vivid for the touch capture device, causing v4l2-compliance errors. Set it to NONE. Signed-off-by: Hans Verkuil Signed-off-by: Mauro Carvalho Chehab

media: constify fb ops across all drivers

2019-12-13T10:29:25Z

Now that the fbops member of struct fb_info is const, we can start making the ops const as well. Remove the redundant fbops assignments while at it. v2: - actually add const in vivid - fix typo (Christophe de Dinechin) Cc: Hans Verkuil Cc: Andy Walls Cc: linux-media@vger.kernel.org Cc: ivtv-devel@ivtvdriver.org Reviewed-by: Daniel Vetter Reviewed-by: Sakari Ailus Acked-by: Hans Verkuil Signed-off-by: Jani Nikula Link: https://patchwork.freedesktop.org/patch/msgid/71794337f8611271f2c1fdb3882119a58e743a87.1575390741.git.jani.nikula@intel.com

media: vivid: Add touch support

2019-12-13T08:22:32Z

Support to emulate touch devices in vivid driver. It generates touch patterns simulating single tap, double tap, triple tap, move from left to right, zoom in, zoom out, palm press simulating large area being pressed on screen, and simulating 16 different simultaneous touch points.The values generated are based on behavior of the rmi_f54 driver. Signed-off-by: Vandana BN Signed-off-by: Hans Verkuil Signed-off-by: Mauro Carvalho Chehab

media: vivid: Add an area control

2019-11-08T06:41:21Z

This control represents a generic read/write area. Suggested-by: Hans Verkuil Signed-off-by: Ricardo Ribalda Delgado Signed-off-by: Hans Verkuil Signed-off-by: Mauro Carvalho Chehab