linux-dev/drivers/misc/eeprom, branch master

Merge tag 'char-misc-6.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc

2022-10-08T15:56:37Z

Pull char/misc and other driver updates from Greg KH: "Here is the large set of char/misc and other small driver subsystem changes for 6.1-rc1. Loads of different things in here: - IIO driver updates, additions, and changes. Probably the largest part of the diffstat - habanalabs driver update with support for new hardware and features, the second largest part of the diff. - fpga subsystem driver updates and additions - mhi subsystem updates - Coresight driver updates - gnss subsystem updates - extcon driver updates - icc subsystem updates - fsi subsystem updates - nvmem subsystem and driver updates - misc driver updates - speakup driver additions for new features - lots of tiny driver updates and cleanups All of these have been in the linux-next tree for a while with no reported issues" * tag 'char-misc-6.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (411 commits) w1: Split memcpy() of struct cn_msg flexible array spmi: pmic-arb: increase SPMI transaction timeout delay spmi: pmic-arb: block access for invalid PMIC arbiter v5 SPMI writes spmi: pmic-arb: correct duplicate APID to PPID mapping logic spmi: pmic-arb: add support to dispatch interrupt based on IRQ status spmi: pmic-arb: check apid against limits before calling irq handler spmi: pmic-arb: do not ack and clear peripheral interrupts in cleanup_irq spmi: pmic-arb: handle spurious interrupt spmi: pmic-arb: add a print in cleanup_irq drivers: spmi: Directly use ida_alloc()/free() MAINTAINERS: add TI ECAP driver info counter: ti-ecap-capture: capture driver support for ECAP Documentation: ABI: sysfs-bus-counter: add frequency & num_overflows items dt-bindings: counter: add ti,am62-ecap-capture.yaml counter: Introduce the COUNTER_COMP_ARRAY component type counter: Consolidate Counter extension sysfs attribute creation counter: Introduce the Count capture component counter: 104-quad-8: Add Signal polarity component counter: Introduce the Signal polarity component counter: interrupt-cnt: Implement watch_validate callback ...

misc: move from strlcpy with unused retval to strscpy

2022-09-01T14:29:42Z

Follow the advice of the below link and prefer 'strscpy' in this subsystem. Conversion is 1:1 because the return value is not used. Generated by a coccinelle script. Link: https://lore.kernel.org/r/CAHk-=wgfRnXz0W3D37d01q3JFkr_i_uTL=V6A6G1oUZcprmknw@mail.gmail.com/ Signed-off-by: Wolfram Sang Link: https://lore.kernel.org/r/20220818210031.7036-1-wsa+renesas@sang-engineering.com Signed-off-by: Greg Kroah-Hartman

i2c: Make remove callback return void

2022-08-16T10:46:26Z

The value returned by an i2c driver's remove function is mostly ignored. (Only an error message is printed if the value is non-zero that the error is ignored.) So change the prototype of the remove function to return no value. This way driver authors are not tempted to assume that passing an error to the upper layer is a good idea. All drivers are adapted accordingly. There is no intended change of behaviour, all callbacks were prepared to return 0 before. Reviewed-by: Peter Senna Tschudin Reviewed-by: Jeremy Kerr Reviewed-by: Benjamin Mugnier Reviewed-by: Javier Martinez Canillas Reviewed-by: Crt Mori Reviewed-by: Heikki Krogerus Acked-by: Greg Kroah-Hartman Acked-by: Marek Behún # for leds-turris-omnia Acked-by: Andy Shevchenko Reviewed-by: Petr Machata # for mlxsw Reviewed-by: Maximilian Luz # for surface3_power Acked-by: Srinivas Pandruvada # for bmc150-accel-i2c + kxcjk-1013 Reviewed-by: Hans Verkuil # for media/* + staging/media/* Acked-by: Miguel Ojeda # for auxdisplay/ht16k33 + auxdisplay/lcd2s Reviewed-by: Luca Ceresoli # for versaclock5 Reviewed-by: Ajay Gupta # for ucsi_ccg Acked-by: Jonathan Cameron # for iio Acked-by: Peter Rosin # for i2c-mux-*, max9860 Acked-by: Adrien Grassein # for lontium-lt8912b Reviewed-by: Jean Delvare # for hwmon, i2c-core and i2c/muxes Acked-by: Corey Minyard # for IPMI Reviewed-by: Vladimir Oltean Acked-by: Dmitry Torokhov Acked-by: Sebastian Reichel # for drivers/power Acked-by: Krzysztof Hałasa Signed-off-by: Uwe Kleine-König Signed-off-by: Wolfram Sang

eeprom: idt_89hpesx: uninitialized data in idt_dbgfs_csr_write()

2022-07-14T14:53:19Z

The simple_write_to_buffer() function will return positive/success if it is able to write a single byte anywhere within the buffer. However that potentially leaves a lot of the buffer uninitialized. In this code it's better to return 0 if the offset is non-zero. This code is not written to support partial writes. And then return -EFAULT if the buffer is not completely initialized. Fixes: cfad6425382e ("eeprom: Add IDT 89HPESx EEPROM/CSR driver") Reviewed-by: Serge Semin Signed-off-by: Dan Carpenter Link: https://lore.kernel.org/r/Ysg1Pu/nzSMe3r1q@kili Signed-off-by: Greg Kroah-Hartman

Merge 5.19-rc6 into char-misc-next

2022-07-11T06:32:58Z

We need the misc driver fixes in here as well. Signed-off-by: Greg Kroah-Hartman

eeprom: idt_89hpesx: fix clang -Wformat warnings

2022-07-08T13:43:56Z

see warnings: | drivers/misc/eeprom/idt_89hpesx.c:570:5: error: format specifies type | 'unsigned char' but the argument has type 'u16' (aka 'unsigned short') | [-Werror,-Wformat] memaddr); - | drivers/misc/eeprom/idt_89hpesx.c:579:5: error: format specifies type | 'unsigned char' but the argument has type 'u16' (aka 'unsigned short') | [-Werror,-Wformat] memaddr); - | drivers/misc/eeprom/idt_89hpesx.c:814:4: error: format specifies type | 'unsigned short' but the argument has type 'unsigned int' | [-Werror,-Wformat] CSR_REAL_ADDR(csraddr)); There's an ongoing movement to eventually enable the -Wformat flag for clang. See: https://github.com/ClangBuiltLinux/linux/issues/378 The format specifier for idt_89hpesx.c:570 and 579 was `0x%02hhx`. The part we care about `%hhx` describes a single byte format, wherein the leftmost byte of our u16 type (of which memaddr is) is truncated. example: ``` uint16_t x = 0xbabe; printf("%hhx\n", x); // output is: be // we lost 'ba' ``` There exists a similar issue at idt_89hpesx.c:814 which involves the CSR_REAL_ADDR macro. This macro returns a u16 but due to default argument promotion for variadic functions (printf-like) actually provides an int to the dev_err method. My proposed solution is to expand the width of the format specifier to fully encompass the provided argument (which is promoted to an int, see below). I opted for '%x' as this specifies an unsigned hexadecimal integer which, with a guarantee, can represent all the values of a u16. As per C11 6.3.1.1: (https://www.open-std.org/jtc1/sc22/wg14/www/docs/n1548.pdf) `If an int can represent all values of the original type ..., the value is converted to an int; otherwise, it is converted to an unsigned int. These are called the integer promotions.` Link: https://github.com/ClangBuiltLinux/linux/issues/378 Reviewed-by: Nathan Chancellor Signed-off-by: Justin Stitt Link: https://lore.kernel.org/r/20220701232031.2639134-1-justinstitt@google.com Signed-off-by: Greg Kroah-Hartman

eeprom: at25: Rework buggy read splitting

2022-06-27T14:21:05Z

The recent change to split reads into chunks has several problems: 1. If an SPI controller has no transfer size limit, max_chunk is SIZE_MAX, and num_msgs becomes zero, causing no data to be read into the buffer, and exposing the original contents of the buffer to userspace, 2. If the requested read size is not a multiple of the maximum transfer size, the last transfer reads too much data, overflowing the buffer, 3. The loop logic differs from the write case. Fix the above by: 1. Keeping track of the number of bytes that are still to be transferred, instead of precalculating the number of messages and keeping track of the number of bytes tranfered, 2. Calculating the transfer size of each individual message, taking into account the number of bytes left, 3. Switching from a "while"-loop to a "do-while"-loop, and renaming "msg_count" to "segment". While at it, drop the superfluous cast from "unsigned int" to "unsigned int", also from at25_ee_write(), where it was probably copied from. Fixes: 0a35780c755ccec0 ("eeprom: at25: Split reads into chunks and cap write size") Signed-off-by: Geert Uytterhoeven Link: https://lore.kernel.org/r/7ae260778d2c08986348ea48ce02ef148100e088.1655817534.git.geert+renesas@glider.be Signed-off-by: Greg Kroah-Hartman

eeprom: at25: Split reads into chunks and cap write size

2022-06-10T14:42:48Z

Make use of spi_max_transfer_size to avoid requesting transfers that are too large for some spi controllers. Signed-off-by: Brad Bishop Signed-off-by: Eddie James Signed-off-by: Joel Stanley Link: https://lore.kernel.org/r/20220524215142.60047-1-eajames@linux.ibm.com Signed-off-by: Greg Kroah-Hartman

eeprom: at25: Use DMA safe buffers

2022-04-24T15:25:10Z

Reading EEPROM fails with following warning: [ 16.357496] ------------[ cut here ]------------ [ 16.357529] fsl_spi b01004c0.spi: rejecting DMA map of vmalloc memory [ 16.357698] WARNING: CPU: 0 PID: 371 at include/linux/dma-mapping.h:326 fsl_spi_cpm_bufs+0x2a0/0x2d8 [ 16.357775] CPU: 0 PID: 371 Comm: od Not tainted 5.16.11-s3k-dev-01743-g19beecbfe9d6-dirty #109 [ 16.357806] NIP: c03fbc9c LR: c03fbc9c CTR: 00000000 [ 16.357825] REGS: e68d9b20 TRAP: 0700 Not tainted (5.16.11-s3k-dev-01743-g19beecbfe9d6-dirty) [ 16.357849] MSR: 00029032 CR: 24002282 XER: 00000000 [ 16.357931] [ 16.357931] GPR00: c03fbc9c e68d9be0 c26d06a0 00000039 00000001 c0d36364 c0e96428 00000027 [ 16.357931] GPR08: 00000001 00000000 00000023 3fffc000 24002282 100d3dd6 100a2ffc 00000000 [ 16.357931] GPR16: 100cd280 100b0000 00000000 aff54f7e 100d0000 100d0000 00000001 100cf328 [ 16.357931] GPR24: 100cf328 00000000 00000003 e68d9e30 c156b410 e67ab4c0 e68d9d38 c24ab278 [ 16.358253] NIP [c03fbc9c] fsl_spi_cpm_bufs+0x2a0/0x2d8 [ 16.358292] LR [c03fbc9c] fsl_spi_cpm_bufs+0x2a0/0x2d8 [ 16.358325] Call Trace: [ 16.358336] [e68d9be0] [c03fbc9c] fsl_spi_cpm_bufs+0x2a0/0x2d8 (unreliable) [ 16.358388] [e68d9c00] [c03fcb44] fsl_spi_bufs.isra.0+0x94/0x1a0 [ 16.358436] [e68d9c20] [c03fd970] fsl_spi_do_one_msg+0x254/0x3dc [ 16.358483] [e68d9cb0] [c03f7e50] __spi_pump_messages+0x274/0x8a4 [ 16.358529] [e68d9ce0] [c03f9d30] __spi_sync+0x344/0x378 [ 16.358573] [e68d9d20] [c03fb52c] spi_sync+0x34/0x60 [ 16.358616] [e68d9d30] [c03b4dec] at25_ee_read+0x138/0x1a8 [ 16.358667] [e68d9e50] [c04a8fb8] bin_attr_nvmem_read+0x98/0x110 [ 16.358725] [e68d9e60] [c0204b14] kernfs_fop_read_iter+0xc0/0x1fc [ 16.358774] [e68d9e80] [c0168660] vfs_read+0x284/0x410 [ 16.358821] [e68d9f00] [c016925c] ksys_read+0x6c/0x11c [ 16.358863] [e68d9f30] [c00160e0] ret_from_syscall+0x0/0x28 ... [ 16.359608] ---[ end trace a4ce3e34afef0cb5 ]--- [ 16.359638] fsl_spi b01004c0.spi: unable to map tx dma This is due to the AT25 driver using buffers on stack, which is not possible with CONFIG_VMAP_STACK. As mentionned in kernel Documentation (Documentation/spi/spi-summary.rst): - Follow standard kernel rules, and provide DMA-safe buffers in your messages. That way controller drivers using DMA aren't forced to make extra copies unless the hardware requires it (e.g. working around hardware errata that force the use of bounce buffering). Modify the driver to use a buffer located in the at25 device structure which is allocated via kmalloc during probe. Protect writes in this new buffer with the driver's mutex. Fixes: b587b13a4f67 ("[PATCH] SPI eeprom driver") Cc: stable Signed-off-by: Christophe Leroy Link: https://lore.kernel.org/r/230a9486fc68ea0182df46255e42a51099403642.1648032613.git.christophe.leroy@csgroup.eu Signed-off-by: Greg Kroah-Hartman

Merge tag 'char-misc-5.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc

2022-03-28T19:27:35Z

Pull char/misc and other driver updates from Greg KH: "Here is the big set of char/misc and other small driver subsystem updates for 5.18-rc1. Included in here are merges from driver subsystems which contain: - iio driver updates and new drivers - fsi driver updates - fpga driver updates - habanalabs driver updates and support for new hardware - soundwire driver updates and new drivers - phy driver updates and new drivers - coresight driver updates - icc driver updates Individual changes include: - mei driver updates - interconnect driver updates - new PECI driver subsystem added - vmci driver updates - lots of tiny misc/char driver updates All of these have been in linux-next for a while with no reported problems" * tag 'char-misc-5.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (556 commits) firmware: google: Properly state IOMEM dependency kgdbts: fix return value of __setup handler firmware: sysfb: fix platform-device leak in error path firmware: stratix10-svc: add missing callback parameter on RSU arm64: dts: qcom: add non-secure domain property to fastrpc nodes misc: fastrpc: Add dma handle implementation misc: fastrpc: Add fdlist implementation misc: fastrpc: Add helper function to get list and page misc: fastrpc: Add support to secure memory map dt-bindings: misc: add fastrpc domain vmid property misc: fastrpc: check before loading process to the DSP misc: fastrpc: add secure domain support dt-bindings: misc: add property to support non-secure DSP misc: fastrpc: Add support to get DSP capabilities misc: fastrpc: add support for FASTRPC_IOCTL_MEM_MAP/UNMAP misc: fastrpc: separate fastrpc device from channel context dt-bindings: nvmem: brcm,nvram: add basic NVMEM cells dt-bindings: nvmem: make "reg" property optional nvmem: brcm_nvram: parse NVRAM content into NVMEM cells nvmem: dt-bindings: Fix the error of dt-bindings check ...