linux-dev/drivers/mtd/hyperbus, branch linus/master

mtd: hyperbus: HBMC_AM654 should depend on ARCH_K3

2022-03-14T16:01:58Z

The AM65x HyperBus controller is only present on Texas Instruments AM65x SoCs. Hence add a dependency on ARCH_K3, to prevent asking the user about this driver when configuring a kernel without support for the Texas Instruments Inc. K3 multicore SoC architecture. Signed-off-by: Geert Uytterhoeven Signed-off-by: Miquel Raynal Link: https://lore.kernel.org/linux-mtd/9fd6b975adba710158f28aa603cf87a6d189a418.1646655894.git.geert+renesas@glider.be

Merge tag 'mtd/for-5.17' of git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux

2022-01-11T19:35:28Z

Pull MTD updates from Miquel Raynal: "MTD core changes: - mtdchar: Prevent unbounded allocation in MEMWRITE ioctl - gen_probe: Use bitmap_zalloc() when applicable - Introduce an expert mode for forensics and debugging purposes - Clear out unregistered devices a bit more - Provide unique name for nvmem device - Remove unused header file - Fixed breaking list in __mtd_del_partition. MTD device changes: - Warn about failure to unregister mtd device in sst25l, mchp48l640, mchp23k256, and dataflash drivers. Raw NAND core changes: - Export nand_read_page_hwecc_oob_first() GPMC memory controller for OMAP2 NAND controller changes: - Add support for AM64 SoC and allow build on K3 platforms - Use a compatible match table when checking for NAND controller - Use platform_get_irq() to get the interrupt Raw NAND controller changes: - OMAP2 NAND controller: - Document the missing 'rb-gpios' DT property - Drop unused variable - Fix force_8bit flag behaviour for DMA mode - Move to exec_op interface - Use platform_get_irq() to get the interrupt - Renesas: - Add new NAND controller driver with its bindings and MAINTAINERS entry - Onenand: - Remove redundant variable ooblen - MPC5121: - Remove unused variable in ads5121_select_chip() - GPMI: - Add ERR007117 protection for nfc_apply_timings - Remove explicit default gpmi clock setting for i.MX6 - Use platform_get_irq_byname() to get the interrupt - Remove unneeded variable - Ingenic: - JZ4740 needs 'oob_first' read page function - Davinci: - Rewrite function description - Avoid duplicated page read - Don't calculate ECC when reading page SPI NOR core changes: - Add Pratyush as SPI NOR co-maintainer. - Flash parameters initialization was done in a spaghetti way. Clean flash parameters initialization. - Rework the flash_info flags and clarify where one should be used. - Initialize all flash parameters based on JESD216 SFDP where possible. Flash parameters and settings that are SFDP discoverable should not be duplicated via flash_info flags at flash declaration. - Remove debugfs entries that duplicate sysfs entries. SPI NOR manufacturer driver changes: - Use late_init() hook in various drivers to make it clear that those flash parameters are either not declared in the JESD216 SFDP standard, or the SFDP tables which define those flash parameters are not defined by the flash. - Fix mtd size for s3an flashes. - Write 2 bytes when disabling Octal DTR mode: 1 byte long transactions are not allowed in 8D-8D-8D mode. Hyperbus changes: - Couple of fixes in Renesas hyperbus rpc-if driver to avoid crash on module remove and for missing check for error value in probe" * tag 'mtd/for-5.17' of git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux: (71 commits) mtd: spi-nor: Remove debugfs entries that duplicate sysfs entries mtd: spi-nor: micron-st: write 2 bytes when disabling Octal DTR mode mtd: spi-nor: spansion: write 2 bytes when disabling Octal DTR mode mtd: spi-nor: core: use 2 data bytes for template ops mtd: spi-nor: Constify part specific fixup hooks mtd: spi-nor: core: Remove reference to spi-nor.c mtd: rawnand: gpmi: Use platform_get_irq_byname() to get the interrupt mtd: rawnand: omap_elm: Use platform_get_irq() to get the interrupt mtd: rawnand: omap2: Select GPMC device driver for ARCH_K3 memory: omap-gpmc: Use a compatible match table when checking for NAND controller memory: omap-gpmc: Add support for GPMC on AM64 SoC dt-bindings: memory-controllers: ti,gpmc: Add compatible for AM64 memory: omap-gpmc: Use platform_get_irq() to get the interrupt MAINTAINERS: Add an entry for Renesas NAND controller mtd: rawnand: renesas: Add new NAND controller driver dt-bindings: mtd: renesas: Describe Renesas R-Car Gen3 & RZ/N1 NAND controller mtd: rawnand: gpmi: remove unneeded variable mtd: rawnand: omap2: drop unused variable mtd: rawnand: omap2: fix force_8bit flag behaviour for DMA mode mtd: rawnand: omap2: Add compatible for AM64 SoC ...

mtd: hyperbus: rpc-if: fix bug in rpcif_hb_remove

2021-11-21T11:51:40Z

The following KASAN BUG is observed when testing the rpc-if driver on rcar-gen3: root@rcar-gen3:~# modprobe -r rpc-if [ 101.930146] ================================================================== [ 101.937408] BUG: KASAN: slab-out-of-bounds in __lock_acquire+0x518/0x25d0 [ 101.944240] Read of size 8 at addr ffff0004c5be2750 by task modprobe/664 [ 101.950959] [ 101.952466] CPU: 2 PID: 664 Comm: modprobe Not tainted 5.14.0-rc1-00342-g1a1464d7aa31 #1 [ 101.960578] Hardware name: Renesas H3ULCB board based on r8a77951 (DT) [ 101.967120] Call trace: [ 101.969580] dump_backtrace+0x0/0x2c0 [ 101.973275] show_stack+0x1c/0x30 [ 101.976616] dump_stack_lvl+0x9c/0xd8 [ 101.980301] print_address_description.constprop.0+0x74/0x2b8 [ 101.986071] kasan_report+0x1f4/0x26c [ 101.989757] __asan_load8+0x98/0xd4 [ 101.993266] __lock_acquire+0x518/0x25d0 [ 101.997215] lock_acquire.part.0+0x18c/0x360 [ 102.001506] lock_acquire+0x74/0x90 [ 102.005013] _raw_spin_lock_irq+0x98/0x130 [ 102.009131] __pm_runtime_disable+0x30/0x210 [ 102.013427] rpcif_hb_remove+0x5c/0x70 [rpc_if] [ 102.018001] platform_remove+0x40/0x80 [ 102.021771] __device_release_driver+0x234/0x350 [ 102.026412] driver_detach+0x158/0x20c [ 102.030179] bus_remove_driver+0xa0/0x140 [ 102.034212] driver_unregister+0x48/0x80 [ 102.038153] platform_driver_unregister+0x18/0x24 [ 102.042879] rpcif_platform_driver_exit+0x1c/0x34 [rpc_if] [ 102.048400] __arm64_sys_delete_module+0x210/0x310 [ 102.053212] invoke_syscall+0x60/0x190 [ 102.056986] el0_svc_common+0x12c/0x144 [ 102.060844] do_el0_svc+0x88/0xac [ 102.064181] el0_svc+0x24/0x3c [ 102.067257] el0t_64_sync_handler+0x1a8/0x1b0 [ 102.071634] el0t_64_sync+0x198/0x19c [ 102.075315] [ 102.076815] Allocated by task 628: [ 102.080781] [ 102.082280] Last potentially related work creation: [ 102.087524] [ 102.089022] The buggy address belongs to the object at ffff0004c5be2000 [ 102.089022] which belongs to the cache kmalloc-2k of size 2048 [ 102.101555] The buggy address is located 1872 bytes inside of [ 102.101555] 2048-byte region [ffff0004c5be2000, ffff0004c5be2800) [ 102.113486] The buggy address belongs to the page: [ 102.118409] [ 102.119908] Memory state around the buggy address: [ 102.124711] ffff0004c5be2600: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc [ 102.131947] ffff0004c5be2680: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc [ 102.139181] >ffff0004c5be2700: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc [ 102.146412] ^ [ 102.152257] ffff0004c5be2780: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc [ 102.159491] ffff0004c5be2800: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc [ 102.166723] ================================================================== The above bug is caused by use of the wrong pointer in the rpcif_disable_rpm() call. Fix the bug by using the correct pointer. Fixes: 5de15b610f78 ("mtd: hyperbus: add Renesas RPC-IF driver") Signed-off-by: George G. Davis Signed-off-by: Vignesh Raghavendra Link: https://lore.kernel.org/r/20210716204935.25859-1-george_davis@mentor.com

memory: renesas-rpc-if: Add support for RZ/G2L

2021-11-16T11:09:11Z

SPI Multi I/O Bus Controller on RZ/G2L SoC is almost identical to the RPC-IF interface found on R-Car Gen3 SoC's. This patch adds a new compatible string for the RZ/G2L family so that the timing values on RZ/G2L can be adjusted. Signed-off-by: Lad Prabhakar Reviewed-by: Biju Das Reviewed-by: Wolfram Sang Link: https://lore.kernel.org/r/20211025205631.21151-8-prabhakar.mahadev-lad.rj@bp.renesas.com Signed-off-by: Krzysztof Kozlowski

mtd: hyperbus: rpc-if: Check return value of rpcif_sw_init()

2021-11-15T06:19:29Z

rpcif_sw_init() can fail so make sure we check the return value of it and on error exit rpcif_hb_probe() callback with error code. Fixes: 5de15b610f78 ("mtd: hyperbus: add Renesas RPC-IF driver") Signed-off-by: Lad Prabhakar Signed-off-by: Vignesh Raghavendra Reviewed-by: Biju Das Reviewed-by: Wolfram Sang Reviewed-by: Geert Uytterhoeven Link: https://lore.kernel.org/r/20211025205631.21151-5-prabhakar.mahadev-lad.rj@bp.renesas.com

mtd: hyperbus: Fix build failure when only RPCIF_HYPERBUS is enabled

2020-10-12T19:12:08Z

commit 5de15b610f78 ("mtd: hyperbus: add Renesas RPC-IF driver") leads to build failure[1] with COMPILE_TEST and RPCIF_HYPERBUS enabled. This is because driver needs functions RENESAS_RPCIF which is only buildable for CONFIG_ARCH_RENESAS. Fix this by dropping COMPILE_TEST from RPCIF_HYPERBUS Kconfig entry. This ensures driver can be built only when RENESAS_RPCIF is also selected. [1]: rpc-if.c:(.text+0x20): undefined reference to `rpcif_disable_rpm' ld: drivers/mtd/hyperbus/rpc-if.o: in function `rpcif_hb_prepare_read': rpc-if.c:(.text+0xd6): undefined reference to `rpcif_prepare' ld: drivers/mtd/hyperbus/rpc-if.o: in function `rpcif_hb_read16': [...] Fixes: 5de15b610f78 ("mtd: hyperbus: add Renesas RPC-IF driver") leads Reported-by: Richard Weinberger Signed-off-by: Vignesh Raghavendra Signed-off-by: Richard Weinberger

mtd: hyperbus: add Renesas RPC-IF driver

2020-10-06T07:06:21Z

Add the HyperFLash driver for the Renesas RPC-IF. It's the "front end" driver using the "back end" APIs in the main driver to talk to the real hardware. Signed-off-by: Sergei Shtylyov Signed-off-by: Vignesh Raghavendra Link: https://lore.kernel.org/r/78abb851-2beb-fe7d-87e5-ce58ee877d35@gmail.com

mtd: hyperbus: hbmc-am654: Add DMA support for reads

2020-09-30T08:05:18Z

AM654 HyperBus controller provides MMIO interface to read data from flash. So add DMA memcpy support for reading data over MMIO interface. This provides 5x improvement in throughput and reduces CPU usage as well. Signed-off-by: Vignesh Raghavendra Reviewed-by: Peter Ujfalusi Link: https://lore.kernel.org/r/20200924081214.16934-5-vigneshr@ti.com

mtd: hyperbus: hbmc-am654: Drop pm_runtime* calls from probe

2020-09-30T08:05:18Z

Recent genpd changes for K3 platform ensure device is ON before driver probe is called. Therefore, drop redundant pm_runtime_* calls from driver to simplify the code. Signed-off-by: Vignesh Raghavendra Link: https://lore.kernel.org/r/20200924081214.16934-4-vigneshr@ti.com

mtd: hyperbus: hbmc-am654: Fix direct mapping setup flash access

2020-09-30T08:05:18Z

Setting up of direct mapping should be done with flash node's IO address space and not with controller's IO region. Fixes: b6fe8bc67d2d3 ("mtd: hyperbus: move direct mapping setup to AM654 HBMC driver") Signed-off-by: Vignesh Raghavendra Link: https://lore.kernel.org/r/20200924081214.16934-3-vigneshr@ti.com