linux-dev/drivers/net/can/ifi_canfd, branch master

can: dev: fix skb drop check

2022-11-07T13:00:27Z

In commit a6d190f8c767 ("can: skb: drop tx skb if in listen only mode") the priv->ctrlmode element is read even on virtual CAN interfaces that do not create the struct can_priv at startup. This out-of-bounds read may lead to CAN frame drops for virtual CAN interfaces like vcan and vxcan. This patch mainly reverts the original commit and adds a new helper for CAN interface drivers that provide the required information in struct can_priv. Fixes: a6d190f8c767 ("can: skb: drop tx skb if in listen only mode") Reported-by: Dariusz Stojaczyk Cc: Vincent Mailhol Cc: Max Staudt Signed-off-by: Oliver Hartkopp Acked-by: Vincent Mailhol Link: https://lore.kernel.org/all/20221102095431.36831-1-socketcan@hartkopp.net Cc: stable@vger.kernel.org # 6.0.x [mkl: patch pch_can, too] Signed-off-by: Marc Kleine-Budde

net: drop the weight argument from netif_napi_add

2022-09-29T01:57:14Z

We tell driver developers to always pass NAPI_POLL_WEIGHT as the weight to netif_napi_add(). This may be confusing to newcomers, drop the weight argument, those who really need to tweak the weight can use netif_napi_add_weight(). Acked-by: Marc Kleine-Budde # for CAN Link: https://lore.kernel.org/r/20220927132753.750069-1-kuba@kernel.org Signed-off-by: Jakub Kicinski

can: tree-wide: advertise software timestamping capabilities

2022-07-28T09:44:01Z

Currently, some CAN drivers support hardware timestamping, some do not. But userland has no method to query which features are supported (aside maybe of getting RX messages and observe whether or not hardware timestamps stay at zero). The canonical way for a network driver to advertised what kind of timestamping it supports is to implement ethtool_ops::get_ts_info(). This patch only targets the CAN drivers which *do not* support hardware timestamping. For each of those CAN drivers, implement the get_ts_info() using the generic ethtool_op_get_ts_info(). This way, userland can do: | $ ethtool --show-time-stamping canX to confirm the device timestamping capacities. N.B. the drivers which support hardware timestamping will be migrated in separate patches. Signed-off-by: Vincent Mailhol Link: https://lore.kernel.org/all/20220727101641.198847-6-mailhol.vincent@wanadoo.fr [mkl: mscan: add missing mscan_ethtool_ops] Signed-off-by: Marc Kleine-Budde

can: add CAN_ERR_CNT flag to notify availability of error counter

2022-07-20T07:27:37Z

Add a dedicated flag in uapi/linux/can/error.h to notify the userland that fields data[6] and data[7] of the CAN error frame were respectively populated with the tx and rx error counters. For all driver tree-wide, set up this flags whenever needed. Link: https://lore.kernel.org/all/20220719143550.3681-12-mailhol.vincent@wanadoo.fr Signed-off-by: Vincent Mailhol Signed-off-by: Marc Kleine-Budde

can: can-dev: remove obsolete CAN LED support

2022-05-19T20:15:51Z

Since commit 30f3b42147ba6f ("can: mark led trigger as broken") the CAN specific LED support was disabled and marked as BROKEN. As the common LED support with CONFIG_LEDS_TRIGGER_NETDEV should do this work now the code can be removed as preparation for a CAN netdevice Kconfig rework. Link: https://lore.kernel.org/all/20220518154527.29046-1-socketcan@hartkopp.net Suggested-by: Vincent Mailhol Signed-off-by: Oliver Hartkopp [mkl: remove led.h from MAINTAINERS] Signed-off-by: Marc Kleine-Budde

can: do not increase rx_bytes statistics for RTR frames

2022-01-05T11:09:05Z

The actual payload length of the CAN Remote Transmission Request (RTR) frames is always 0, i.e. no payload is transmitted on the wire. However, those RTR frames still use the DLC to indicate the length of the requested frame. As such, net_device_stats::rx_bytes should not be increased for the RTR frames. This patch fixes all the CAN drivers. Link: https://lore.kernel.org/all/20211207121531.42941-5-mailhol.vincent@wanadoo.fr Cc: Marc Kleine-Budde Cc: Nicolas Ferre Cc: Alexandre Belloni Cc: Ludovic Desroches Cc: Chandrasekar Ramakrishnan Cc: Maxime Ripard Cc: Chen-Yu Tsai Cc: Jernej Skrabec Cc: Yasushi SHOJI Cc: Appana Durga Kedareswara rao Cc: Naga Sureshkumar Relli Cc: Michal Simek Cc: Stephane Grosjean Tested-by: Jimmy Assarsson # kvaser Signed-off-by: Vincent Mailhol Acked-by: Stefan Mätje # esd_usb2 Tested-by: Stefan Mätje # esd_usb2 Signed-off-by: Marc Kleine-Budde

can: do not increase rx statistics when generating a CAN rx error message frame

2022-01-05T11:09:05Z

The CAN error message frames (i.e. error skb) are an interface specific to socket CAN. The payload of the CAN error message frames does not correspond to any actual data sent on the wire. Only an error flag and a delimiter are transmitted when an error occurs (c.f. ISO 11898-1 section 10.4.4.2 "Error flag"). For this reason, it makes no sense to increment the rx_packets and rx_bytes fields of struct net_device_stats because no actual payload were transmitted on the wire. This patch fixes all the CAN drivers. Link: https://lore.kernel.org/all/20211207121531.42941-2-mailhol.vincent@wanadoo.fr CC: Marc Kleine-Budde CC: Nicolas Ferre CC: Alexandre Belloni CC: Ludovic Desroches CC: Chandrasekar Ramakrishnan CC: Maxime Ripard CC: Chen-Yu Tsai CC: Jernej Skrabec CC: Appana Durga Kedareswara rao CC: Naga Sureshkumar Relli CC: Michal Simek CC: Stephane Grosjean Tested-by: Jimmy Assarsson # kvaser Signed-off-by: Vincent Mailhol Acked-by: Stefan Mätje # esd_usb2 Tested-by: Stefan Mätje # esd_usb2 Signed-off-by: Marc Kleine-Budde

can: dev: can_get_echo_skb(): extend to return can frame length

2021-01-14T07:43:43Z

In order to implement byte queue limits (bql) in CAN drivers, the length of the CAN frame needs to be passed into the networking stack after queueing and after transmission completion. To avoid to calculate this length twice, extend can_get_echo_skb() to return that value. Convert all users of this function, too. Reviewed-by: Vincent Mailhol Link: https://lore.kernel.org/r/20210111141930.693847-14-mkl@pengutronix.de Signed-off-by: Marc Kleine-Budde

can: dev: can_put_echo_skb(): extend to handle frame_len

2021-01-14T07:43:43Z

Add a frame_len argument to can_put_echo_skb() which is used to save length of the CAN frame into field frame_len of struct can_skb_priv so that it can be later used after transmission completion. Convert all users of this function, too. Drivers which implement BQL call can_put_echo_skb() with the output of can_skb_get_frame_len(skb) and drivers which do not simply pass zero as an input (in the same way that NULL would be given to can_get_echo_skb()). This way, we have a nice symmetry between the two echo functions. Link: https://lore.kernel.org/r/20210111061335.39983-1-mailhol.vincent@wanadoo.fr Signed-off-by: Marc Kleine-Budde Reviewed-by: Vincent Mailhol Link: https://lore.kernel.org/r/20210111141930.693847-13-mkl@pengutronix.de Signed-off-by: Vincent Mailhol

can: rename CAN FD related can_len2dlc and can_dlc2len helpers

2020-11-20T11:05:14Z

The helper functions can_len2dlc and can_dlc2len are only relevant for CAN FD data length code (DLC) conversion. To fit the introduced can_cc_dlc2len for Classical CAN we rename: can_dlc2len -> can_fd_dlc2len to get the payload length from the DLC can_len2dlc -> can_fd_len2dlc to get the DLC from the payload length Suggested-by: Vincent Mailhol Signed-off-by: Oliver Hartkopp Link: https://lore.kernel.org/r/20201110101852.1973-6-socketcan@hartkopp.net Signed-off-by: Marc Kleine-Budde