linux-dev/drivers/net/can/rcar, branch linus/master

can: can-dev: remove obsolete CAN LED support

2022-05-19T20:15:51Z

Since commit 30f3b42147ba6f ("can: mark led trigger as broken") the CAN specific LED support was disabled and marked as BROKEN. As the common LED support with CONFIG_LEDS_TRIGGER_NETDEV should do this work now the code can be removed as preparation for a CAN netdevice Kconfig rework. Link: https://lore.kernel.org/all/20220518154527.29046-1-socketcan@hartkopp.net Suggested-by: Vincent Mailhol Signed-off-by: Oliver Hartkopp [mkl: remove led.h from MAINTAINERS] Signed-off-by: Marc Kleine-Budde

can: can-dev: move to netif_napi_add_weight()

2022-05-19T20:11:28Z

We want to remove the weight argument from the basic version of the netif_napi_add() call. Move all the callers in drivers/net/can that pass a custom weight (i.e. not NAPI_POLL_WEIGHT or 64) to the netif_napi_add_weight() API. Link: https://lore.kernel.org/all/20220517002345.1812104-1-kuba@kernel.org Signed-off-by: Jakub Kicinski Signed-off-by: Marc Kleine-Budde

can: rcar_canfd: Add support for r8a779a0 SoC

2022-03-10T08:49:13Z

Adds support for the CANFD IP variant in the V3U SoC. Differences to controllers in other SoCs are limited to an increase in the number of channels from two to eight, an absence of dedicated registers for "classic" CAN mode, and a number of differences in magic numbers (register offsets and layouts). Inspired by BSP patch by Kazuya Mizuguchi. Link: https://lore.kernel.org/all/20220309162609.3726306-2-uli+renesas@fpond.eu Signed-off-by: Ulrich Hecht Reviewed-by: Vincent Mailhol Signed-off-by: Marc Kleine-Budde

can: rcar_canfd: rcar_canfd_channel_probe(): register the CAN device when fully ready

2022-02-25T16:46:54Z

Register the CAN device only when all the necessary initialization is completed. This patch makes sure all the data structures and locks are initialized before registering the CAN device. Link: https://lore.kernel.org/all/20220221225935.12300-1-prabhakar.mahadev-lad.rj@bp.renesas.com Reported-by: Pavel Machek Signed-off-by: Lad Prabhakar Reviewed-by: Pavel Machek Reviewed-by: Ulrich Hecht Signed-off-by: Marc Kleine-Budde

Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net

2022-01-10T01:00:17Z

Merge in fixes directly in prep for the 5.17 merge window. No conflicts. Signed-off-by: Jakub Kicinski

can: rcar_canfd: rcar_canfd_channel_probe(): make sure we free CAN network device

2022-01-09T12:32:28Z

Make sure we free CAN network device in the error path. There are several jumps to fail label after allocating the CAN network device successfully. This patch places the free_candev() under fail label so that in failure path a jump to fail label frees the CAN network device. Fixes: 76e9353a80e9 ("can: rcar_canfd: Add support for RZ/G2L family") Link: https://lore.kernel.org/all/20220106114801.20563-1-prabhakar.mahadev-lad.rj@bp.renesas.com Reported-by: Pavel Machek Signed-off-by: Lad Prabhakar Reviewed-by: Kieran Bingham Signed-off-by: Marc Kleine-Budde

can: dev: add sanity check in can_set_static_ctrlmode()

2022-01-05T11:09:05Z

Previous patch removed can_priv::ctrlmode_static to replace it with can_get_static_ctrlmode(). A condition sine qua non for this to work is that the controller static modes should never be set in can_priv::ctrlmode_supported (c.f. the comment on can_priv::ctrlmode_supported which states that it is for "options that can be *modified* by netlink"). Also, this condition is already correctly fulfilled by all existing drivers which rely on the ctrlmode_static feature. Nonetheless, we added an extra safeguard in can_set_static_ctrlmode() to return an error value and to warn the developer who would be adventurous enough to set to static a given feature that is already set to supported. The drivers which rely on the static controller mode are then updated to check the return value of can_set_static_ctrlmode(). Link: https://lore.kernel.org/all/20211213160226.56219-3-mailhol.vincent@wanadoo.fr Signed-off-by: Vincent Mailhol Signed-off-by: Marc Kleine-Budde

can: do not increase tx_bytes statistics for RTR frames

2022-01-05T11:09:05Z

The actual payload length of the CAN Remote Transmission Request (RTR) frames is always 0, i.e. no payload is transmitted on the wire. However, those RTR frames still use the DLC to indicate the length of the requested frame. As such, net_device_stats::tx_bytes should not be increased when sending RTR frames. The function can_get_echo_skb() already returns the correct length, even for RTR frames (c.f. [1]). However, for historical reasons, the drivers do not use can_get_echo_skb()'s return value and instead, most of them store a temporary length (or dlc) in some local structure or array. Using the return value of can_get_echo_skb() solves the issue. After doing this, such length/dlc fields become unused and so this patch does the adequate cleaning when needed. This patch fixes all the CAN drivers. Finally, can_get_echo_skb() is decorated with the __must_check attribute in order to force future drivers to correctly use its return value (else the compiler would emit a warning). [1] commit ed3320cec279 ("can: dev: __can_get_echo_skb(): fix real payload length return value for RTR frames") Link: https://lore.kernel.org/all/20211207121531.42941-6-mailhol.vincent@wanadoo.fr Cc: Nicolas Ferre Cc: Alexandre Belloni Cc: Ludovic Desroches Cc: Maxime Ripard Cc: Chen-Yu Tsai Cc: Jernej Skrabec Cc: Yasushi SHOJI Cc: Oliver Hartkopp Cc: Stephane Grosjean Cc: Andreas Larsson Tested-by: Jimmy Assarsson # kvaser Signed-off-by: Vincent Mailhol Acked-by: Stefan Mätje # esd_usb2 Tested-by: Stefan Mätje # esd_usb2 [mkl: add conversion for grcan] Signed-off-by: Marc Kleine-Budde

can: do not increase rx_bytes statistics for RTR frames

2022-01-05T11:09:05Z

can: do not increase rx statistics when generating a CAN rx error message frame

2022-01-05T11:09:05Z

The CAN error message frames (i.e. error skb) are an interface specific to socket CAN. The payload of the CAN error message frames does not correspond to any actual data sent on the wire. Only an error flag and a delimiter are transmitted when an error occurs (c.f. ISO 11898-1 section 10.4.4.2 "Error flag"). For this reason, it makes no sense to increment the rx_packets and rx_bytes fields of struct net_device_stats because no actual payload were transmitted on the wire. This patch fixes all the CAN drivers. Link: https://lore.kernel.org/all/20211207121531.42941-2-mailhol.vincent@wanadoo.fr CC: Marc Kleine-Budde CC: Nicolas Ferre CC: Alexandre Belloni CC: Ludovic Desroches CC: Chandrasekar Ramakrishnan CC: Maxime Ripard CC: Chen-Yu Tsai CC: Jernej Skrabec CC: Appana Durga Kedareswara rao CC: Naga Sureshkumar Relli CC: Michal Simek CC: Stephane Grosjean Tested-by: Jimmy Assarsson # kvaser Signed-off-by: Vincent Mailhol Acked-by: Stefan Mätje # esd_usb2 Tested-by: Stefan Mätje # esd_usb2 Signed-off-by: Marc Kleine-Budde