linux-dev/drivers/net/can/sja1000, branch master

can: dev: fix skb drop check

2022-11-07T13:00:27Z

In commit a6d190f8c767 ("can: skb: drop tx skb if in listen only mode") the priv->ctrlmode element is read even on virtual CAN interfaces that do not create the struct can_priv at startup. This out-of-bounds read may lead to CAN frame drops for virtual CAN interfaces like vcan and vxcan. This patch mainly reverts the original commit and adds a new helper for CAN interface drivers that provide the required information in struct can_priv. Fixes: a6d190f8c767 ("can: skb: drop tx skb if in listen only mode") Reported-by: Dariusz Stojaczyk Cc: Vincent Mailhol Cc: Max Staudt Signed-off-by: Oliver Hartkopp Acked-by: Vincent Mailhol Link: https://lore.kernel.org/all/20221102095431.36831-1-socketcan@hartkopp.net Cc: stable@vger.kernel.org # 6.0.x [mkl: patch pch_can, too] Signed-off-by: Marc Kleine-Budde

can: sja1000: remove redundant variable ret

2022-09-05T20:00:43Z

Return value directly from register_candev() instead of getting value from redundant variable ret. Reported-by: Zeal Robot Signed-off-by: Jinpeng Cui Link: https://lore.kernel.org/all/20220831161835.306079-1-cui.jinpeng2@zte.com.cn Signed-off-by: Marc Kleine-Budde

can: sja1000: Add support for RZ/N1 SJA1000 CAN Controller

2022-09-05T20:00:43Z

The SJA1000 CAN controller on RZ/N1 SoC has no clock divider register (CDR) support compared to others. This patch adds support for RZ/N1 SJA1000 CAN Controller, by adding SoC specific compatible to handle this difference as well as using clk framework to retrieve the CAN clock frequency. Signed-off-by: Biju Das Link: https://lore.kernel.org/all/20220710115248.190280-7-biju.das.jz@bp.renesas.com Signed-off-by: Marc Kleine-Budde

net: move from strlcpy with unused retval to strscpy

2022-08-31T21:11:07Z

Follow the advice of the below link and prefer 'strscpy' in this subsystem. Conversion is 1:1 because the return value is not used. Generated by a coccinelle script. Link: https://lore.kernel.org/r/CAHk-=wgfRnXz0W3D37d01q3JFkr_i_uTL=V6A6G1oUZcprmknw@mail.gmail.com/ Signed-off-by: Wolfram Sang Acked-by: Marc Kleine-Budde # for CAN Link: https://lore.kernel.org/r/20220830201457.7984-1-wsa+renesas@sang-engineering.com Signed-off-by: Jakub Kicinski

can: tree-wide: advertise software timestamping capabilities

2022-07-28T09:44:01Z

Currently, some CAN drivers support hardware timestamping, some do not. But userland has no method to query which features are supported (aside maybe of getting RX messages and observe whether or not hardware timestamps stay at zero). The canonical way for a network driver to advertised what kind of timestamping it supports is to implement ethtool_ops::get_ts_info(). This patch only targets the CAN drivers which *do not* support hardware timestamping. For each of those CAN drivers, implement the get_ts_info() using the generic ethtool_op_get_ts_info(). This way, userland can do: | $ ethtool --show-time-stamping canX to confirm the device timestamping capacities. N.B. the drivers which support hardware timestamping will be migrated in separate patches. Signed-off-by: Vincent Mailhol Link: https://lore.kernel.org/all/20220727101641.198847-6-mailhol.vincent@wanadoo.fr [mkl: mscan: add missing mscan_ethtool_ops] Signed-off-by: Marc Kleine-Budde

can: add CAN_ERR_CNT flag to notify availability of error counter

2022-07-20T07:27:37Z

Add a dedicated flag in uapi/linux/can/error.h to notify the userland that fields data[6] and data[7] of the CAN error frame were respectively populated with the tx and rx error counters. For all driver tree-wide, set up this flags whenever needed. Link: https://lore.kernel.org/all/20220719143550.3681-12-mailhol.vincent@wanadoo.fr Signed-off-by: Vincent Mailhol Signed-off-by: Marc Kleine-Budde

can: sja1000: do not report txerr and rxerr during bus-off

2022-07-20T07:26:49Z

During bus off, the error count is greater than 255 and can not fit in a u8. Fixes: 215db1856e83 ("can: sja1000: Consolidate and unify state change handling") Link: https://lore.kernel.org/all/20220719143550.3681-4-mailhol.vincent@wanadoo.fr Signed-off-by: Vincent Mailhol Signed-off-by: Marc Kleine-Budde

can: sja1000: Change the return type as void for SoC specific init

2022-07-19T18:46:59Z

Change the return type as void for SoC specific init function as it always return 0. Link: https://lore.kernel.org/all/20220710115248.190280-6-biju.das.jz@bp.renesas.com Signed-off-by: Biju Das Signed-off-by: Marc Kleine-Budde

can: sja1000: Use device_get_match_data to get device data

2022-07-19T18:46:59Z

This patch replaces of_match_device->device_get_match_data to get pointer to device data. Link: https://lore.kernel.org/all/20220710115248.190280-5-biju.das.jz@bp.renesas.com Signed-off-by: Biju Das Signed-off-by: Marc Kleine-Budde

can: sja1000: Add Quirk for RZ/N1 SJA1000 CAN controller

2022-07-19T18:46:59Z

As per Chapter 6.5.16 of the RZ/N1 Peripheral Manual, The SJA1000 CAN controller does not support Clock Divider Register compared to the reference Philips SJA1000 device. This patch adds a device quirk to handle this difference. Link: https://lore.kernel.org/all/20220710115248.190280-4-biju.das.jz@bp.renesas.com Signed-off-by: Biju Das Signed-off-by: Marc Kleine-Budde