linux-dev/drivers/net/dsa/sja1105, branch master

net: dsa: sja1105: remove unnecessary spi_set_drvdata()

2022-09-23T02:30:39Z

Remove unnecessary spi_set_drvdata() in ->remove(), the driver_data will be set to NULL in device_unbind_cleanup() after calling ->remove(). Signed-off-by: Yang Yingliang Signed-off-by: Jakub Kicinski

net: dsa: sja1105: fix buffer overflow in sja1105_setup_devlink_regions()

2022-08-18T04:58:15Z

If an error occurs in dsa_devlink_region_create(), then 'priv->regions' array will be accessed by negative index '-1'. Found by Linux Verification Center (linuxtesting.org) with SVACE. Signed-off-by: Rustam Subkhankulov Fixes: bf425b82059e ("net: dsa: sja1105: expose static config as devlink region") Link: https://lore.kernel.org/r/20220817003845.389644-1-subkhankulov@ispras.ru Signed-off-by: Jakub Kicinski

Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net

2022-07-21T20:03:39Z

No conflicts. Signed-off-by: Jakub Kicinski

net: dsa: sja1105: silent spi_device_id warnings

2022-07-19T10:20:40Z

Add spi_device_id entries to silent following warnings: SPI driver sja1105 has no spi_device_id for nxp,sja1105e SPI driver sja1105 has no spi_device_id for nxp,sja1105t SPI driver sja1105 has no spi_device_id for nxp,sja1105p SPI driver sja1105 has no spi_device_id for nxp,sja1105q SPI driver sja1105 has no spi_device_id for nxp,sja1105r SPI driver sja1105 has no spi_device_id for nxp,sja1105s SPI driver sja1105 has no spi_device_id for nxp,sja1110a SPI driver sja1105 has no spi_device_id for nxp,sja1110b SPI driver sja1105 has no spi_device_id for nxp,sja1110c SPI driver sja1105 has no spi_device_id for nxp,sja1110d Fixes: 5fa6863ba692 ("spi: Check we have a spi_device_id for each DT compatible") Signed-off-by: Oleksij Rempel Reviewed-by: Vladimir Oltean Reviewed-by: Florian Fainelli Link: https://lore.kernel.org/r/20220717135831.2492844-1-o.rempel@pengutronix.de Signed-off-by: Paolo Abeni

net: make xpcs_do_config to accept advertising for pcs-xpcs and sja1105

2022-06-17T09:55:35Z

xpcs_config() has 'advertising' input that is required for C37 1000BASE-X AN in later patch series. So, we prepare xpcs_do_config() for it. For sja1105, xpcs_do_config() is used for xpcs configuration without depending on advertising input, so set to NULL. Reported-by: kernel test robot Signed-off-by: Ong Boon Leong Signed-off-by: David S. Miller

net: dsa: sja1105: Convert to mdiobus_c45_read

2022-05-02T11:21:38Z

Stop using the helpers to construct a special phy address which indicates C45. Instead use the C45 accessors, which will call the busses C45 specific read/write API. Reviewed-by: Vladimir Oltean Tested-by: Vladimir Oltean Signed-off-by: Andrew Lunn Signed-off-by: Paolo Abeni

net: dsa: pass extack to dsa_switch_ops :: port_mirror_add()

2022-03-18T00:42:47Z

Drivers might have error messages to propagate to user space, most common being that they support a single mirror port. Propagate the netlink extack so that they can inform user space in a verbal way of their limitations. Signed-off-by: Vladimir Oltean Signed-off-by: Jakub Kicinski

net: dsa: Use netif_rx().

2022-03-04T12:02:19Z

Since commit baebdf48c3600 ("net: dev: Makes sure netif_rx() can be invoked in any context.") the function netif_rx() can be used in preemptible/thread context as well as in interrupt context. Use netif_rx(). Cc: Kurt Kanzenbach Cc: Andrew Lunn Cc: Vivien Didelot Cc: Florian Fainelli Cc: Vladimir Oltean Signed-off-by: Sebastian Andrzej Siewior Acked-by: Kurt Kanzenbach # hellcreek Signed-off-by: David S. Miller

Merge tag 'spi-remove-void' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi

2022-02-28T18:43:07Z

Mark Brown says: ==================== spi: Make remove() return void This series from Uwe Kleine-König converts the spi remove function to return void since there is nothing useful that we can do with a failure and it as more buses are converted it'll enable further work on the driver core. ==================== Link: https://lore.kernel.org/r/20220228173957.1262628-2-broonie@kernel.org/ Signed-off-by: Jakub Kicinski

flow_offload: reject offload for all drivers with invalid police parameters

2022-02-28T11:12:20Z

As more police parameters are passed to flow_offload, driver can check them to make sure hardware handles packets in the way indicated by tc. The conform-exceed control should be drop/pipe or drop/ok. Besides, for drop/ok, the police should be the last action. As hardware can't configure peakrate/avrate/overhead, offload should not be supported if any of them is configured. Signed-off-by: Jianbo Liu Reviewed-by: Ido Schimmel Signed-off-by: David S. Miller