linux-dev/drivers/net/dsa, branch master

net: dsa: Fix possible memory leaks in dsa_loop_init()

2022-10-28T09:32:59Z

kmemleak reported memory leaks in dsa_loop_init(): kmemleak: 12 new suspected memory leaks unreferenced object 0xffff8880138ce000 (size 2048): comm "modprobe", pid 390, jiffies 4295040478 (age 238.976s) backtrace: [<000000006a94f1d5>] kmalloc_trace+0x26/0x60 [<00000000a9c44622>] phy_device_create+0x5d/0x970 [<00000000d0ee2afc>] get_phy_device+0xf3/0x2b0 [<00000000dca0c71f>] __fixed_phy_register.part.0+0x92/0x4e0 [<000000008a834798>] fixed_phy_register+0x84/0xb0 [<0000000055223fcb>] dsa_loop_init+0xa9/0x116 [dsa_loop] ... There are two reasons for memleak in dsa_loop_init(). First, fixed_phy_register() create and register phy_device: fixed_phy_register() get_phy_device() phy_device_create() # freed by phy_device_free() phy_device_register() # freed by phy_device_remove() But fixed_phy_unregister() only calls phy_device_remove(). So the memory allocated in phy_device_create() is leaked. Second, when mdio_driver_register() fail in dsa_loop_init(), it just returns and there is no cleanup for phydevs. Fix the problems by catching the error of mdio_driver_register() in dsa_loop_init(), then calling both fixed_phy_unregister() and phy_device_free() to release phydevs. Also add a function for phydevs cleanup to avoid duplacate. Fixes: 98cd1552ea27 ("net: dsa: Mock-up driver") Signed-off-by: Chen Zhongjin Signed-off-by: David S. Miller

net: dsa: qca8k: fix ethtool autocast mib for big-endian systems

2022-10-14T07:22:28Z

The switch sends autocast mib in little-endian. This is problematic for big-endian system as the values needs to be converted. Fix this by converting each mib value to cpu byte order. Fixes: 5c957c7ca78c ("net: dsa: qca8k: add support for mib autocast in Ethernet packet") Tested-by: Pawel Dembicki Tested-by: Lech Perczak Signed-off-by: Christian Marangi Signed-off-by: David S. Miller

net: dsa: qca8k: fix inband mgmt for big-endian systems

2022-10-14T07:22:28Z

The header and the data of the skb for the inband mgmt requires to be in little-endian. This is problematic for big-endian system as the mgmt header is written in the cpu byte order. Fix this by converting each value for the mgmt header and data to little-endian, and convert to cpu byte order the mgmt header and data sent by the switch. Fixes: 5950c7c0a68c ("net: dsa: qca8k: add support for mgmt read/write in Ethernet packet") Tested-by: Pawel Dembicki Tested-by: Lech Perczak Signed-off-by: Christian Marangi Reviewed-by: Lech Perczak Signed-off-by: David S. Miller

Merge tag 'i2c-for-6.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux

2022-10-05T01:54:33Z

Pull i2c updates from Wolfram Sang: - 'remove' callback converted to return void. Big change with trivial fixes all over the tree. Other subsystems depending on this change have been asked to pull an immutable topic branch for this. - new driver for Microchip PCI1xxxx switch - heavy refactoring of the Mellanox BlueField driver - we prefer async probe in the i801 driver now - the rest is usual driver updates (support for more SoCs, some refactoring, some feature additions) * tag 'i2c-for-6.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: (37 commits) i2c: pci1xxxx: prevent signed integer overflow i2c: acpi: Replace zero-length array with DECLARE_FLEX_ARRAY() helper i2c: i801: Prefer async probe i2c: designware-pci: Use standard pattern for memory allocation i2c: designware-pci: Group AMD NAVI quirk parts together i2c: microchip: pci1xxxx: Add driver for I2C host controller in multifunction endpoint of pci1xxxx switch docs: i2c: slave-interface: return errno when handle I2C_SLAVE_WRITE_REQUESTED i2c: mlxbf: remove device tree support i2c: mlxbf: support BlueField-3 SoC i2c: cadence: Add standard bus recovery support i2c: mlxbf: add multi slave functionality i2c: mlxbf: support lock mechanism macintosh/ams: Adapt declaration of ams_i2c_remove() to earlier change i2c: riic: Use devm_platform_ioremap_resource() i2c: mlxbf: remove IRQF_ONESHOT dt-bindings: i2c: rockchip: add rockchip,rk3128-i2c dt-bindings: i2c: renesas,rcar-i2c: Add r8a779g0 support i2c: tegra: Add GPCDMA support i2c: scmi: Convert to be a platform driver i2c: rk3x: Add rv1126 support ...

net: dsa: hellcreek: Offload per-tc max SDU from tc-taprio

2022-09-30T01:52:06Z

Add support for configuring the max SDU per priority and per port. If not specified, keep the default. Signed-off-by: Kurt Kanzenbach Signed-off-by: Vladimir Oltean Signed-off-by: Jakub Kicinski

net: dsa: hellcreek: refactor hellcreek_port_setup_tc() to use switch/case

2022-09-30T01:52:05Z

The following patch will need to make this function also respond to TC_QUERY_BASE, so make the processing more structured around the tc_setup_type. Signed-off-by: Vladimir Oltean Reviewed-by: Kurt Kanzenbach Signed-off-by: Jakub Kicinski

net: dsa: felix: offload per-tc max SDU from tc-taprio

2022-09-30T01:52:05Z

Our current vsc9959_tas_guard_bands_update() algorithm has a limitation imposed by the hardware design. To avoid packet overruns between one gate interval and the next (which would add jitter for scheduled traffic in the next gate), we configure the switch to use guard bands. These are as large as the largest packet which is possible to be transmitted. The problem is that at tc-taprio intervals of sizes comparable to a guard band, there isn't an obvious place in which to split the interval between the useful portion (for scheduling) and the guard band portion (where scheduling is blocked). For example, a 10 us interval at 1Gbps allows 1225 octets to be transmitted. We currently split the interval between the bare minimum of 33 ns useful time (required to schedule a single packet) and the rest as guard band. But 33 ns of useful scheduling time will only allow a single packet to be sent, be that packet 1200 octets in size, or 60 octets in size. It is impossible to send 2 60 octets frames in the 10 us window. Except that if we reduced the guard band (and therefore the maximum allowable SDU size) to 5 us, the useful time for scheduling is now also 5 us, so more packets could be scheduled. The hardware inflexibility of not scheduling according to individual packet lengths must unfortunately propagate to the user, who needs to tune the queueMaxSDU values if he wants to fit more small packets into a 10 us interval, rather than one large packet. Signed-off-by: Vladimir Oltean Signed-off-by: Jakub Kicinski

Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net

2022-09-29T21:30:51Z

No conflicts. Signed-off-by: Jakub Kicinski

net: dsa: felix: update regmap requests to be string-based

2022-09-29T02:15:02Z

Existing felix DSA drivers (vsc9959, vsc9953) are all switches that were integrated in NXP SoCs, which makes them a bit unusual compared to the usual Microchip branded Ocelot switches. To be precise, looking at Documentation/devicetree/bindings/net/mscc,vsc7514-switch.yaml, one can see 21 memory regions for the "switch" node, and these correspond to the "targets" of the switch IP, which are spread throughout the guts of that SoC's memory space. In NXP integrations, those targets still exist, but they were condensed within a single memory region, with no other peripheral in between them, so it made more sense for the driver to ioremap the entire memory space of the switch, and then find the targets within that memory space via some offsets hardcoded in the driver. The effect of this design decision is that now, the felix driver expects hardware instantiations to provide their own resource definitions, which is kind of odd when considering a typical device (those are retrieved from 'reg' properties in the device tree, using platform_get_resource() or similar). Allow other hardware instantiations that share the felix driver to not provide a hardcoded array of resources in the future. Instead, make the common denominator based on which regmaps are created be just the resource "names". Each instantiation comes with its own array of names that are mandatory for it, and with an optional array of resources. So we split the resources in 2 arrays, one is what's requested and the other is what's provided. There is one pool of provided resources, in felix->info->resources (of length felix->info->num_resources). There are 2 different ways of requesting a resource. One is by enum ocelot_target (this handles the global regmaps), and one is by int port (this handles the per-port ones). For the existing vsc9959 and vsc9953, it would be a bit stupid to request something that's not provided, given that the 2 arrays are both defined in the same place. The advantage is that we can now modify felix_request_regmap_by_name() to make felix->info->resources[] optional, and if absent, the implementation can call dev_get_regmap() and this is something that is compatible with MFD. Co-developed-by: Colin Foster Signed-off-by: Colin Foster Signed-off-by: Vladimir Oltean Signed-off-by: Jakub Kicinski

net: dsa: felix: use DEFINE_RES_MEM_NAMED for resources

2022-09-29T02:14:56Z

Use less verbose resource definitions in vsc9959 and vsc9953. This also sets IORESOURCE_MEM in the constant array of resources, so we don't have to do this from felix_init_structs() - in fact, in the future, we may even support IORESOURCE_REG resources. Note that this macro takes start and length as argument, and we had start and end before. So transform end into length. While at it, sort the resources according to their offset. Signed-off-by: Vladimir Oltean Signed-off-by: Jakub Kicinski