linux-dev/drivers/net/ethernet/3com/Kconfig, branch master

make legacy ISA probe optional

2021-08-03T12:05:26Z

There are very few ISA drivers left that rely on the static probing from drivers/net/Space.o. Make them all select a new CONFIG_NETDEV_LEGACY_INIT symbol, and drop the entire probe logic when that is disabled. The 9 drivers that are called from Space.c are the same set that calls netdev_boot_setup_check(). Signed-off-by: Arnd Bergmann Signed-off-by: David S. Miller

docs: networking: reorganize driver documentation again

2020-06-26T23:08:44Z

Organize driver documentation by device type. Most documents have fairly verbose yet uninformative names, so let users first select a well defined device type, and then search for a particular driver. While at it rename the section from Vendor drivers to Hardware drivers. This seems more accurate, besides people sometimes refer to out-of-tree drivers as vendor drivers. Signed-off-by: Jakub Kicinski Acked-by: Jeff Kirsher Acked-by: Shannon Nelson Signed-off-by: David S. Miller

treewide: replace '---help---' in Kconfig files with 'help'

2020-06-13T16:57:21Z

Since commit 84af7a6194e4 ("checkpatch: kconfig: prefer 'help' over '---help---'"), the number of '---help---' has been gradually decreasing, but there are still more than 2400 instances. This commit finishes the conversion. While I touched the lines, I also fixed the indentation. There are a variety of indentation styles found. a) 4 spaces + '---help---' b) 7 spaces + '---help---' c) 8 spaces + '---help---' d) 1 space + 1 tab + '---help---' e) 1 tab + '---help---' (correct indentation) f) 1 tab + 1 space + '---help---' g) 1 tab + 2 spaces + '---help---' In order to convert all of them to 1 tab + 'help', I ran the following commend: $ find . -name 'Kconfig*' | xargs sed -i 's/^[[:space:]]*---help---/\thelp/' Signed-off-by: Masahiro Yamada

docs: networking: device drivers: convert 3com/vortex.txt to ReST

2020-05-01T19:24:41Z

- add SPDX header; - add a document title; - mark code blocks and literals as such; - mark tables as such; - adjust identation, whitespaces and blank lines where needed; - add to networking/index.rst. Signed-off-by: Mauro Carvalho Chehab Signed-off-by: David S. Miller

treewide: Add SPDX license identifier - Makefile/Kconfig

2019-05-21T08:50:46Z

Add SPDX license identifiers to all Make/Kconfig files which: - Have no license information of any form These files fall under the project license, GPL v2 only. The resulting SPDX license identifier is: GPL-2.0-only Signed-off-by: Thomas Gleixner Signed-off-by: Greg Kroah-Hartman

net: documentation: build a directory structure for drivers

2018-12-05T19:30:06Z

Documentation/networking/ is full of cryptically named files with driver documentation. This makes finding interesting information at a glance really hard. Move all those files into a directory called device_drivers (since not all drivers are for device) and fix up references. RFC v0.1 -> RFC v1: - also add .txt suffix to the files which are missing it (Quentin) Signed-off-by: Jakub Kicinski Reviewed-by: Quentin Monnet Acked-by: David Ahern Acked-by: Henrik Austad Signed-off-by: David S. Miller

net: prevent ISA drivers from building on PPC32

2018-07-22T18:12:29Z

Prevent drivers from building on PPC32 if they use isa_bus_to_virt(), isa_virt_to_bus(), or isa_page_to_bus(), which are not available and thus cause build errors. ../drivers/net/ethernet/3com/3c515.c: In function 'corkscrew_open': ../drivers/net/ethernet/3com/3c515.c:824:9: error: implicit declaration of function 'isa_virt_to_bus'; did you mean 'virt_to_bus'? [-Werror=implicit-function-declaration] ../drivers/net/ethernet/amd/lance.c: In function 'lance_rx': ../drivers/net/ethernet/amd/lance.c:1203:23: error: implicit declaration of function 'isa_bus_to_virt'; did you mean 'bus_to_virt'? [-Werror=implicit-function-declaration] ../drivers/net/ethernet/amd/ni65.c: In function 'ni65_init_lance': ../drivers/net/ethernet/amd/ni65.c:585:20: error: implicit declaration of function 'isa_virt_to_bus'; did you mean 'virt_to_bus'? [-Werror=implicit-function-declaration] ../drivers/net/ethernet/cirrus/cs89x0.c: In function 'net_open': ../drivers/net/ethernet/cirrus/cs89x0.c:897:20: error: implicit declaration of function 'isa_virt_to_bus'; did you mean 'virt_to_bus'? [-Werror=implicit-function-declaration] Signed-off-by: Randy Dunlap Suggested-by: Michael Ellerman Signed-off-by: David S. Miller

drivers/net: remove all references to obsolete Ethernet-HOWTO

2015-06-23T13:50:35Z

This howto made sense in the 1990s when users had to manually configure ISA cards with jumpers or vendor utilities, but with the implementation of PCI it became increasingly less and less relevant, to the point where it has been well over a decade since I last updated it. And there is no value in anyone else taking over updating it either. However the references to it continue to spread as boiler plate text from one Kconfig file into the next. We are not doing end users any favours by pointing them at this old document, so lets kill it with fire, once and for all, to hopefully stop any further spread. No code is changed in this commit, just Kconfig help text. Signed-off-by: Paul Gortmaker Signed-off-by: David S. Miller

Kconfig: rename HAS_IOPORT to HAS_IOPORT_MAP

2014-04-07T23:36:11Z

If the renamed symbol is defined lib/iomap.c implements ioport_map and ioport_unmap and currently (nearly) all platforms define the port accessor functions outb/inb and friend unconditionally. So HAS_IOPORT_MAP is the better name for this. Consequently NO_IOPORT is renamed to NO_IOPORT_MAP. The motivation for this change is to reintroduce a symbol HAS_IOPORT that signals if outb/int et al are available. I will address that at least one merge window later though to keep surprises to a minimum and catch new introductions of (HAS|NO)_IOPORT. The changes in this commit were done using: $ git grep -l -E '(NO|HAS)_IOPORT' | xargs perl -p -i -e 's/\b((?:CONFIG_)?(?:NO|HAS)_IOPORT)\b/$1_MAP/' Signed-off-by: Uwe Kleine-König Acked-by: Arnd Bergmann Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds

3com: Fix drivers/net/ethernet/3com/Kconfig references to PCMCIA and 3c515

2013-10-03T19:55:24Z

The Vortex driver works with PCI and Cardbus devices, not PCMCIA. There never was an EISA 3c515 card, only ISA, so remove that option. Signed-off-by: Matthew Whitehead Signed-off-by: David S. Miller