linux-dev/drivers/net/ethernet/allwinner, branch master

net: ethernet: move from strlcpy with unused retval to strscpy

2022-08-31T21:11:26Z

Follow the advice of the below link and prefer 'strscpy' in this subsystem. Conversion is 1:1 because the return value is not used. Generated by a coccinelle script. Link: https://lore.kernel.org/r/CAHk-=wgfRnXz0W3D37d01q3JFkr_i_uTL=V6A6G1oUZcprmknw@mail.gmail.com/ Signed-off-by: Wolfram Sang Reviewed-by: Petr Machata # For drivers/net/ethernet/mellanox/mlxsw Acked-by: Geoff Levand # For ps3_gelic_net and spider_net_ethtool Acked-by: Tom Lendacky # For drivers/net/ethernet/amd/xgbe/xgbe-ethtool.c Acked-by: Marcin Wojtas # For drivers/net/ethernet/marvell/mvpp2 Reviewed-by: Leon Romanovsky # For drivers/net/ethernet/mellanox/mlx{4|5} Reviewed-by: Shay Agroskin # For drivers/net/ethernet/amazon/ena Acked-by: Krzysztof Hałasa # For IXP4xx Ethernet Link: https://lore.kernel.org/r/20220830201457.7984-3-wsa+renesas@sang-engineering.com Signed-off-by: Jakub Kicinski

net: ethernet: sun4i-emac: Fix an error handling path in emac_probe()

2022-01-15T22:34:52Z

A dma_request_chan() call is hidden in emac_configure_dma(). It must be released in the probe if an error occurs, as already done in the remove function. Add the corresponding dma_release_channel() call. Fixes: 47869e82c8b8 ("sun4i-emac.c: add dma support") Signed-off-by: Christophe JAILLET Signed-off-by: David S. Miller

net: ethernet: sun4i-emac: replace magic number with macro

2022-01-12T04:34:16Z

This patch remove magic numbers in sun4i-emac.c and replace with macros defined in sun4i-emac.h Signed-off-by: Conley Lee Tested-by: Corentin Labbe Link: https://lore.kernel.org/r/tencent_71466C2135CD1780B19D7844BE3F167C940A@qq.com Signed-off-by: Jakub Kicinski

net: allwinner: Fix print format

2022-01-10T00:52:12Z

Kees reports quoted commit introduced the following warning on arm64: drivers/net/ethernet/allwinner/sun4i-emac.c:922:60: error: format '%x' expects argument of type 'unsigned int', but argument 3 has type 'resource_size_t' {aka 'long long unsigned int'} [-Werror=format=] 922 | netdev_info(ndev, "get io resource from device: 0x%x, size = %u\n", | ~^ | | | unsigned int | %llx 923 | regs->start, resource_size(regs)); | ~~~~~~~~~~~ | | | resource_size_t {aka long long unsigned int} .. and another one like that for resource_size(). Switch to %pa and a cast. Reported-by: Kees Cook Fixes: 47869e82c8b8 ("sun4i-emac.c: add dma support") Link: https://lore.kernel.org/r/20220108034438.2227343-1-kuba@kernel.org Signed-off-by: Jakub Kicinski

sun4i-emac.c: add dma support

2021-12-30T01:51:36Z

Thanks for your review. Here is the new version for this patch. This patch adds support for the emac rx dma present on sun4i. The emac is able to move packets from rx fifo to RAM by using dma. Change since v4. - rename sbk field to skb - rename alloc_emac_dma_req to emac_alloc_dma_req - using kzalloc(..., GPF_ATOMIC) in interrupt context to avoid sleeping - retry by using emac_inblk_32bit when emac_dma_inblk_32bit fails - fix some code style issues Change since v5. - fix some code style issue Signed-off-by: Conley Lee Link: https://lore.kernel.org/r/tencent_DE05ADA53D5B084D4605BE6CB11E49EF7408@qq.com Signed-off-by: Jakub Kicinski

sun4i-emac.c: remove unnecessary branch

2021-12-15T10:29:03Z

According to the current implementation of emac_rx, every arrived packet will be processed in the while loop. So, there is no remain packet last time. The skb_last field and this branch for dealing with it is unnecessary. Signed-off-by: Conley Lee Signed-off-by: David S. Miller

ethernet: use of_get_ethdev_address()

2021-10-07T12:39:51Z

Use the new of_get_ethdev_address() helper for the cases where dev->dev_addr is passed in directly as the destination. @@ expression dev, np; @@ - of_get_mac_address(np, dev->dev_addr) + of_get_ethdev_address(np, dev) Signed-off-by: Jakub Kicinski Signed-off-by: David S. Miller

ethernet: use eth_hw_addr_set()

2021-10-02T13:18:25Z

Convert all Ethernet drivers from memcpy(... ETH_ADDR) to eth_hw_addr_set(): @@ expression dev, np; @@ - memcpy(dev->dev_addr, np, ETH_ALEN) + eth_hw_addr_set(dev, np) Signed-off-by: Jakub Kicinski Signed-off-by: David S. Miller

dev_ioctl: split out ndo_eth_ioctl

2021-07-27T19:11:45Z

Most users of ndo_do_ioctl are ethernet drivers that implement the MII commands SIOCGMIIPHY/SIOCGMIIREG/SIOCSMIIREG, or hardware timestamping with SIOCSHWTSTAMP/SIOCGHWTSTAMP. Separate these from the few drivers that use ndo_do_ioctl to implement SIOCBOND, SIOCBR and SIOCWANDEV commands. This is a purely cosmetic change intended to help readers find their way through the implementation. Cc: Doug Ledford Cc: Jason Gunthorpe Cc: Jay Vosburgh Cc: Veaceslav Falico Cc: Andy Gospodarek Cc: Andrew Lunn Cc: Vivien Didelot Cc: Florian Fainelli Cc: Vladimir Oltean Cc: Leon Romanovsky Cc: linux-rdma@vger.kernel.org Signed-off-by: Arnd Bergmann Acked-by: Jason Gunthorpe Signed-off-by: David S. Miller

of: net: pass the dst buffer to of_get_mac_address()

2021-04-13T21:35:02Z

of_get_mac_address() returns a "const void*" pointer to a MAC address. Lately, support to fetch the MAC address by an NVMEM provider was added. But this will only work with platform devices. It will not work with PCI devices (e.g. of an integrated root complex) and esp. not with DSA ports. There is an of_* variant of the nvmem binding which works without devices. The returned data of a nvmem_cell_read() has to be freed after use. On the other hand the return of_get_mac_address() points to some static data without a lifetime. The trick for now, was to allocate a device resource managed buffer which is then returned. This will only work if we have an actual device. Change it, so that the caller of of_get_mac_address() has to supply a buffer where the MAC address is written to. Unfortunately, this will touch all drivers which use the of_get_mac_address(). Usually the code looks like: const char *addr; addr = of_get_mac_address(np); if (!IS_ERR(addr)) ether_addr_copy(ndev->dev_addr, addr); This can then be simply rewritten as: of_get_mac_address(np, ndev->dev_addr); Sometimes is_valid_ether_addr() is used to test the MAC address. of_get_mac_address() already makes sure, it just returns a valid MAC address. Thus we can just test its return code. But we have to be careful if there are still other sources for the MAC address before the of_get_mac_address(). In this case we have to keep the is_valid_ether_addr() call. The following coccinelle patch was used to convert common cases to the new style. Afterwards, I've manually gone over the drivers and fixed the return code variable: either used a new one or if one was already available use that. Mansour Moufid, thanks for that coccinelle patch! @a@ identifier x; expression y, z; @@ - x = of_get_mac_address(y); + x = of_get_mac_address(y, z); <... - ether_addr_copy(z, x); ...> @@ identifier a.x; @@ - if (<+... x ...+>) {} @@ identifier a.x; @@ if (<+... x ...+>) { ... } - else {} @@ identifier a.x; expression e; @@ - if (<+... x ...+>@e) - {} - else + if (!(e)) {...} @@ expression x, y, z; @@ - x = of_get_mac_address(y, z); + of_get_mac_address(y, z); ... when != x All drivers, except drivers/net/ethernet/aeroflex/greth.c, were compile-time tested. Suggested-by: Andrew Lunn Signed-off-by: Michael Walle Reviewed-by: Andrew Lunn Signed-off-by: David S. Miller