linux-dev/drivers/net/ethernet/broadcom/bnxt, branch master

bnxt_en: fix potentially incorrect return value for ndo_rx_flow_steer

2022-11-05T02:29:03Z

In the bnxt_en driver ndo_rx_flow_steer returns '0' whenever an entry that we are attempting to steer is already found. This is not the correct behavior. The return code should be the value/index that corresponds to the entry. Returning zero all the time causes the RFS records to be incorrect unless entry '0' is the correct one. As flows migrate to different cores this can create entries that are not correct. Fixes: c0c050c58d84 ("bnxt_en: New Broadcom ethernet driver.") Reported-by: Akshay Navgire Signed-off-by: Alex Barba Signed-off-by: Andy Gospodarek Signed-off-by: Michael Chan Signed-off-by: Jakub Kicinski

bnxt_en: Fix possible crash in bnxt_hwrm_set_coal()

2022-11-05T02:29:02Z

During the error recovery sequence, the rtnl_lock is not held for the entire duration and some datastructures may be freed during the sequence. Check for the BNXT_STATE_OPEN flag instead of netif_running() to ensure that the device is fully operational before proceeding to reconfigure the coalescing settings. This will fix a possible crash like this: BUG: unable to handle kernel NULL pointer dereference at 0000000000000000 PGD 0 P4D 0 Oops: 0000 [#1] SMP NOPTI CPU: 10 PID: 181276 Comm: ethtool Kdump: loaded Tainted: G IOE --------- - - 4.18.0-348.el8.x86_64 #1 Hardware name: Dell Inc. PowerEdge R740/0F9N89, BIOS 2.3.10 08/15/2019 RIP: 0010:bnxt_hwrm_set_coal+0x1fb/0x2a0 [bnxt_en] Code: c2 66 83 4e 22 08 66 89 46 1c e8 10 cb 00 00 41 83 c6 01 44 39 b3 68 01 00 00 0f 8e a3 00 00 00 48 8b 93 c8 00 00 00 49 63 c6 <48> 8b 2c c2 48 8b 85 b8 02 00 00 48 85 c0 74 2e 48 8b 74 24 08 f6 RSP: 0018:ffffb11c8dcaba50 EFLAGS: 00010246 RAX: 0000000000000000 RBX: ffff8d168a8b0ac0 RCX: 00000000000000c5 RDX: 0000000000000000 RSI: ffff8d162f72c000 RDI: ffff8d168a8b0b28 RBP: 0000000000000000 R08: b6e1f68a12e9a7eb R09: 0000000000000000 R10: 0000000000000001 R11: 0000000000000037 R12: ffff8d168a8b109c R13: ffff8d168a8b10aa R14: 0000000000000000 R15: ffffffffc01ac4e0 FS: 00007f3852e4c740(0000) GS:ffff8d24c0080000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000000 CR3: 000000041b3ee003 CR4: 00000000007706e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 PKRU: 55555554 Call Trace: ethnl_set_coalesce+0x3ce/0x4c0 genl_family_rcv_msg_doit.isra.15+0x10f/0x150 genl_family_rcv_msg+0xb3/0x160 ? coalesce_fill_reply+0x480/0x480 genl_rcv_msg+0x47/0x90 ? genl_family_rcv_msg+0x160/0x160 netlink_rcv_skb+0x4c/0x120 genl_rcv+0x24/0x40 netlink_unicast+0x196/0x230 netlink_sendmsg+0x204/0x3d0 sock_sendmsg+0x4c/0x50 __sys_sendto+0xee/0x160 ? syscall_trace_enter+0x1d3/0x2c0 ? __audit_syscall_exit+0x249/0x2a0 __x64_sys_sendto+0x24/0x30 do_syscall_64+0x5b/0x1a0 entry_SYSCALL_64_after_hwframe+0x65/0xca RIP: 0033:0x7f38524163bb Fixes: 2151fe0830fd ("bnxt_en: Handle RESET_NOTIFY async event from firmware.") Reviewed-by: Somnath Kotur Signed-off-by: Michael Chan Signed-off-by: Jakub Kicinski

bnxt_en: fix the handling of PCIE-AER

2022-11-05T02:29:02Z

Fix the sequence required for PCIE-AER. While slot reset occurs, firmware might not be ready and the driver needs to check for its recovery. We also need to remap the health registers for some chips and clear the resource reservations. The resources will be allocated again during bnxt_io_resume(). Fixes: fb1e6e562b37 ("bnxt_en: Fix AER recovery.") Signed-off-by: Vikas Gupta Signed-off-by: Michael Chan Signed-off-by: Jakub Kicinski

bnxt_en: refactor bnxt_cancel_reservations()

2022-11-05T02:29:01Z

Introduce bnxt_clear_reservations() to clear the reserved attributes only. This will be used in the next patch to fix PCI AER handling. Signed-off-by: Vikas Gupta Signed-off-by: Michael Chan Signed-off-by: Jakub Kicinski

Merge tag 'net-6.1-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net

2022-10-21T00:24:59Z

Pull networking fixes from Paolo Abeni: "Including fixes from netfilter. Current release - regressions: - revert "net: fix cpu_max_bits_warn() usage in netif_attrmask_next{,_and}" - revert "net: sched: fq_codel: remove redundant resource cleanup in fq_codel_init()" - dsa: uninitialized variable in dsa_slave_netdevice_event() - eth: sunhme: uninitialized variable in happy_meal_init() Current release - new code bugs: - eth: octeontx2: fix resource not freed after malloc Previous releases - regressions: - sched: fix return value of qdisc ingress handling on success - sched: fix race condition in qdisc_graft() - udp: update reuse->has_conns under reuseport_lock. - tls: strp: make sure the TCP skbs do not have overlapping data - hsr: avoid possible NULL deref in skb_clone() - tipc: fix an information leak in tipc_topsrv_kern_subscr - phylink: add mac_managed_pm in phylink_config structure - eth: i40e: fix DMA mappings leak - eth: hyperv: fix a RX-path warning - eth: mtk: fix memory leaks Previous releases - always broken: - sched: cake: fix null pointer access issue when cake_init() fails" * tag 'net-6.1-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (43 commits) net: phy: dp83822: disable MDI crossover status change interrupt net: sched: fix race condition in qdisc_graft() net: hns: fix possible memory leak in hnae_ae_register() wwan_hwsim: fix possible memory leak in wwan_hwsim_dev_new() sfc: include vport_id in filter spec hash and equal() genetlink: fix kdoc warnings selftests: add selftest for chaining of tc ingress handling to egress net: Fix return value of qdisc ingress handling on success net: sched: sfb: fix null pointer access issue when sfb_init() fails Revert "net: sched: fq_codel: remove redundant resource cleanup in fq_codel_init()" net: sched: cake: fix null pointer access issue when cake_init() fails ethernet: marvell: octeontx2 Fix resource not freed after malloc netfilter: nf_tables: relax NFTA_SET_ELEM_KEY_END set flags requirements netfilter: rpfilter/fib: Set ->flowic_uid correctly for user namespaces. ionic: catch NULL pointer issue on reconfig net: hsr: avoid possible NULL deref in skb_clone() bnxt_en: fix memory leak in bnxt_nvm_test() ip6mr: fix UAF issue in ip6mr_sk_done() when addrconf_init_net() failed udp: Update reuse->has_conns under reuseport_lock. net: ethernet: mediatek: ppe: Remove the unused function mtk_foe_entry_usable() ...

bnxt_en: fix memory leak in bnxt_nvm_test()

2022-10-19T02:18:02Z

Free the kzalloc'ed buffer before returning in the success path. Fixes: 5b6ff128fdf6 ("bnxt_en: implement callbacks for devlink selftests") Signed-off-by: Vikas Gupta Signed-off-by: Michael Chan Link: https://lore.kernel.org/r/1666020742-25834-1-git-send-email-michael.chan@broadcom.com Signed-off-by: Jakub Kicinski

treewide: use get_random_bytes() when possible

2022-10-11T23:42:58Z

The prandom_bytes() function has been a deprecated inline wrapper around get_random_bytes() for several releases now, and compiles down to the exact same code. Replace the deprecated wrapper with a direct call to the real function. This was done as a basic find and replace. Reviewed-by: Greg Kroah-Hartman Reviewed-by: Kees Cook Reviewed-by: Yury Norov Reviewed-by: Christophe Leroy # powerpc Acked-by: Jakub Kicinski Signed-off-by: Jason A. Donenfeld

net: drop the weight argument from netif_napi_add

2022-09-29T01:57:14Z

We tell driver developers to always pass NAPI_POLL_WEIGHT as the weight to netif_napi_add(). This may be confusing to newcomers, drop the weight argument, those who really need to tweak the weight can use netif_napi_add_weight(). Acked-by: Marc Kleine-Budde # for CAN Link: https://lore.kernel.org/r/20220927132753.750069-1-kuba@kernel.org Signed-off-by: Jakub Kicinski

bnxt_en: replace reset with config timestamps

2022-09-22T22:37:45Z

Any change to the hardware timestamps configuration triggers nic restart, which breaks transmition and reception of network packets for a while. But there is no need to fully restart the device because while configuring hardware timestamps. The code for changing configuration runs after all of the initialisation, when the NIC is actually up and running. This patch changes the code that ioctl will only update configuration registers and will not trigger carrier status change, but in case of timestamps for all rx packetes it fallbacks to close()/open() sequnce because of synchronization issues in the hardware. Tested on BCM57504. Cc: Richard Cochran Signed-off-by: Vadim Fedorenko Reviewed-by: Michael Chan Link: https://lore.kernel.org/r/20220922191038.29921-1-vfedorenko@novek.ru Signed-off-by: Jakub Kicinski

Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net

2022-09-22T20:02:10Z

drivers/net/ethernet/freescale/fec.h 7b15515fc1ca ("Revert "fec: Restart PPS after link state change"") 40c79ce13b03 ("net: fec: add stop mode support for imx8 platform") https://lore.kernel.org/all/20220921105337.62b41047@canb.auug.org.au/ drivers/pinctrl/pinctrl-ocelot.c c297561bc98a ("pinctrl: ocelot: Fix interrupt controller") 181f604b33cd ("pinctrl: ocelot: add ability to be used in a non-mmio configuration") https://lore.kernel.org/all/20220921110032.7cd28114@canb.auug.org.au/ tools/testing/selftests/drivers/net/bonding/Makefile bbb774d921e2 ("net: Add tests for bonding and team address list management") 152e8ec77640 ("selftests/bonding: add a test for bonding lladdr target") https://lore.kernel.org/all/20220921110437.5b7dbd82@canb.auug.org.au/ drivers/net/can/usb/gs_usb.c 5440428b3da6 ("can: gs_usb: gs_can_open(): fix race dev->can.state condition") 45dfa45f52e6 ("can: gs_usb: add RX and TX hardware timestamp support") https://lore.kernel.org/all/84f45a7d-92b6-4dc5-d7a1-072152fab6ff@tessares.net/ Signed-off-by: Jakub Kicinski