linux-dev/drivers/net/ethernet/cadence/Kconfig, branch master

ethernet: fix PTP_1588_CLOCK dependencies

2021-08-14T00:49:05Z

The 'imply' keyword does not do what most people think it does, it only politely asks Kconfig to turn on another symbol, but does not prevent it from being disabled manually or built as a loadable module when the user is built-in. In the ICE driver, the latter now causes a link failure: aarch64-linux-ld: drivers/net/ethernet/intel/ice/ice_main.o: in function `ice_eth_ioctl': ice_main.c:(.text+0x13b0): undefined reference to `ice_ptp_get_ts_config' ice_main.c:(.text+0x13b0): relocation truncated to fit: R_AARCH64_CALL26 against undefined symbol `ice_ptp_get_ts_config' aarch64-linux-ld: ice_main.c:(.text+0x13bc): undefined reference to `ice_ptp_set_ts_config' ice_main.c:(.text+0x13bc): relocation truncated to fit: R_AARCH64_CALL26 against undefined symbol `ice_ptp_set_ts_config' aarch64-linux-ld: drivers/net/ethernet/intel/ice/ice_main.o: in function `ice_prepare_for_reset': ice_main.c:(.text+0x31fc): undefined reference to `ice_ptp_release' ice_main.c:(.text+0x31fc): relocation truncated to fit: R_AARCH64_CALL26 against undefined symbol `ice_ptp_release' aarch64-linux-ld: drivers/net/ethernet/intel/ice/ice_main.o: in function `ice_rebuild': This is a recurring problem in many drivers, and we have discussed it several times befores, without reaching a consensus. I'm providing a link to the previous email thread for reference, which discusses some related problems. To solve the dependency issue better than the 'imply' keyword, introduce a separate Kconfig symbol "CONFIG_PTP_1588_CLOCK_OPTIONAL" that any driver can depend on if it is able to use PTP support when available, but works fine without it. Whenever CONFIG_PTP_1588_CLOCK=m, those drivers are then prevented from being built-in, the same way as with a 'depends on PTP_1588_CLOCK || !PTP_1588_CLOCK' dependency that does the same trick, but that can be rather confusing when you first see it. Since this should cover the dependencies correctly, the IS_REACHABLE() hack in the header is no longer needed now, and can be turned back into a normal IS_ENABLED() check. Any driver that gets the dependency wrong will now cause a link time failure rather than being unable to use PTP support when that is in a loadable module. However, the two recently added ptp_get_vclocks_index() and ptp_convert_timestamp() interfaces are only called from builtin code with ethtool and socket timestamps, so keep the current behavior by stubbing those out completely when PTP is in a loadable module. This should be addressed properly in a follow-up. As Richard suggested, we may want to actually turn PTP support into a 'bool' option later on, preventing it from being a loadable module altogether, which would be one way to solve the problem with the ethtool interface. Fixes: 06c16d89d2cb ("ice: register 1588 PTP clock device object for E810 devices") Link: https://lore.kernel.org/netdev/20210804121318.337276-1-arnd@kernel.org/ Link: https://lore.kernel.org/netdev/CAK8P3a06enZOf=XyZ+zcAwBczv41UuCTz+=0FMf2gBz1_cOnZQ@mail.gmail.com/ Link: https://lore.kernel.org/netdev/CAK8P3a3=eOxE-K25754+fB_-i_0BZzf9a9RfPTX3ppSwu9WZXw@mail.gmail.com/ Link: https://lore.kernel.org/netdev/20210726084540.3282344-1-arnd@kernel.org/ Acked-by: Shannon Nelson Acked-by: Jacob Keller Acked-by: Richard Cochran Reviewed-by: Vladimir Oltean Signed-off-by: Arnd Bergmann Link: https://lore.kernel.org/r/20210812183509.1362782-1-arnd@kernel.org Signed-off-by: Jakub Kicinski

ethernet: select CONFIG_CRC32 as needed

2020-12-04T22:42:21Z

A number of ethernet drivers require crc32 functionality to be avaialable in the kernel, causing a link error otherwise: arm-linux-gnueabi-ld: drivers/net/ethernet/agere/et131x.o: in function `et1310_setup_device_for_multicast': et131x.c:(.text+0x5918): undefined reference to `crc32_le' arm-linux-gnueabi-ld: drivers/net/ethernet/cadence/macb_main.o: in function `macb_start_xmit': macb_main.c:(.text+0x4b88): undefined reference to `crc32_le' arm-linux-gnueabi-ld: drivers/net/ethernet/faraday/ftgmac100.o: in function `ftgmac100_set_rx_mode': ftgmac100.c:(.text+0x2b38): undefined reference to `crc32_le' arm-linux-gnueabi-ld: drivers/net/ethernet/freescale/fec_main.o: in function `set_multicast_list': fec_main.c:(.text+0x6120): undefined reference to `crc32_le' arm-linux-gnueabi-ld: drivers/net/ethernet/freescale/fman/fman_dtsec.o: in function `dtsec_add_hash_mac_address': fman_dtsec.c:(.text+0x830): undefined reference to `crc32_le' arm-linux-gnueabi-ld: drivers/net/ethernet/freescale/fman/fman_dtsec.o:fman_dtsec.c:(.text+0xb68): more undefined references to `crc32_le' follow arm-linux-gnueabi-ld: drivers/net/ethernet/netronome/nfp/nfpcore/nfp_hwinfo.o: in function `nfp_hwinfo_read': nfp_hwinfo.c:(.text+0x250): undefined reference to `crc32_be' arm-linux-gnueabi-ld: nfp_hwinfo.c:(.text+0x288): undefined reference to `crc32_be' arm-linux-gnueabi-ld: drivers/net/ethernet/netronome/nfp/nfpcore/nfp_resource.o: in function `nfp_resource_acquire': nfp_resource.c:(.text+0x144): undefined reference to `crc32_be' arm-linux-gnueabi-ld: nfp_resource.c:(.text+0x158): undefined reference to `crc32_be' arm-linux-gnueabi-ld: drivers/net/ethernet/nxp/lpc_eth.o: in function `lpc_eth_set_multicast_list': lpc_eth.c:(.text+0x1934): undefined reference to `crc32_le' arm-linux-gnueabi-ld: drivers/net/ethernet/rocker/rocker_ofdpa.o: in function `ofdpa_flow_tbl_do': rocker_ofdpa.c:(.text+0x2e08): undefined reference to `crc32_le' arm-linux-gnueabi-ld: drivers/net/ethernet/rocker/rocker_ofdpa.o: in function `ofdpa_flow_tbl_del': rocker_ofdpa.c:(.text+0x3074): undefined reference to `crc32_le' arm-linux-gnueabi-ld: drivers/net/ethernet/rocker/rocker_ofdpa.o: in function `ofdpa_port_fdb': arm-linux-gnueabi-ld: drivers/net/ethernet/mellanox/mlx5/core/steering/dr_ste.o: in function `mlx5dr_ste_calc_hash_index': dr_ste.c:(.text+0x354): undefined reference to `crc32_le' arm-linux-gnueabi-ld: drivers/net/ethernet/microchip/lan743x_main.o: in function `lan743x_netdev_set_multicast': lan743x_main.c:(.text+0x5dc4): undefined reference to `crc32_le' Add the missing 'select CRC32' entries in Kconfig for each of them. Signed-off-by: Arnd Bergmann Acked-by: Nicolas Ferre Acked-by: Madalin Bucur Acked-by: Mark Einon Acked-by: Simon Horman Link: https://lore.kernel.org/r/20201203232114.1485603-1-arnd@kernel.org Signed-off-by: Jakub Kicinski

treewide: replace '---help---' in Kconfig files with 'help'

2020-06-13T16:57:21Z

Since commit 84af7a6194e4 ("checkpatch: kconfig: prefer 'help' over '---help---'"), the number of '---help---' has been gradually decreasing, but there are still more than 2400 instances. This commit finishes the conversion. While I touched the lines, I also fixed the indentation. There are a variety of indentation styles found. a) 4 spaces + '---help---' b) 7 spaces + '---help---' c) 8 spaces + '---help---' d) 1 space + 1 tab + '---help---' e) 1 tab + '---help---' (correct indentation) f) 1 tab + 1 space + '---help---' g) 1 tab + 2 spaces + '---help---' In order to convert all of them to 1 tab + 'help', I ran the following commend: $ find . -name 'Kconfig*' | xargs sed -i 's/^[[:space:]]*---help---/\thelp/' Signed-off-by: Masahiro Yamada

net: Make PTP-specific drivers depend on PTP_1588_CLOCK

2020-05-01T22:27:51Z

Commit d1cbfd771ce8 ("ptp_clock: Allow for it to be optional") changed all PTP-capable Ethernet drivers from `select PTP_1588_CLOCK` to `imply PTP_1588_CLOCK`, "in order to break the hard dependency between the PTP clock subsystem and ethernet drivers capable of being clock providers." As a result it is possible to build PTP-capable Ethernet drivers without the PTP subsystem by deselecting PTP_1588_CLOCK. Drivers are required to handle the missing dependency gracefully. Some PTP-capable Ethernet drivers (e.g., TI_CPSW) factor their PTP code out into separate drivers (e.g., TI_CPTS_MOD). The above commit also changed these PTP-specific drivers to `imply PTP_1588_CLOCK`, making it possible to build them without the PTP subsystem. But as Grygorii Strashko noted in [1]: On Wed, Apr 22, 2020 at 02:16:11PM +0300, Grygorii Strashko wrote: > Another question is that CPTS completely nonfunctional in this case and > it was never expected that somebody will even try to use/run such > configuration (except for random build purposes). In my view, enabling a PTP-specific driver without the PTP subsystem is a configuration error made possible by the above commit. Kconfig should not allow users to create a configuration with missing dependencies that results in "completely nonfunctional" drivers. I audited all network drivers that call ptp_clock_register() but merely `imply PTP_1588_CLOCK` and found five PTP-specific drivers that are likely nonfunctional without PTP_1588_CLOCK: NET_DSA_MV88E6XXX_PTP NET_DSA_SJA1105_PTP MACB_USE_HWSTAMP CAVIUM_PTP TI_CPTS_MOD Note how these symbols all reference PTP or timestamping in their name; this is a clue that they depend on PTP_1588_CLOCK. Change them from `imply PTP_1588_CLOCK` [2] to `depends on PTP_1588_CLOCK`. I'm not using `select PTP_1588_CLOCK` here because PTP_1588_CLOCK has its own dependencies, which `select` would not transitively apply. Additionally, remove the `select NET_PTP_CLASSIFY` from CPTS_TI_MOD; PTP_1588_CLOCK already selects that. [1]: https://lore.kernel.org/lkml/c04458ed-29ee-1797-3a11-7f3f560553e6@ti.com/ [2]: NET_DSA_SJA1105_PTP had never declared any type of dependency on PTP_1588_CLOCK (`imply` or otherwise); adding a `depends on PTP_1588_CLOCK` here seems appropriate. Cc: Arnd Bergmann Cc: Richard Cochran Cc: Nicolas Pitre Cc: Grygorii Strashko Cc: Geert Uytterhoeven Fixes: d1cbfd771ce8 ("ptp_clock: Allow for it to be optional") Signed-off-by: Clay McClure Signed-off-by: David S. Miller

net: macb: convert to phylink

2019-11-13T19:45:42Z

This patch converts the MACB Ethernet driver to the Phylink framework. The MAC configuration is moved to the Phylink ops and Phylink helpers are now used in the ethtools functions. This helps to access the flow control and pauseparam logic and this will be helpful in the future for boards using this controller with SFP cages. Tested-by: Alexandre Belloni Signed-off-by: Antoine Tenart Signed-off-by: David S. Miller

net: macb: Kconfig: Rename Atmel to Cadence

2019-06-26T21:09:33Z

The help text makes it look like NET_VENDOR_CADENCE enables support for Atmel devices, when in reality it's a driver written by Atmel that supports Cadence devices. This may confuse users that have this device on a non-Atmel SoC. The fix is just s/Atmel/Cadence/, but I did go and re-wrap the Kconfig help text as that change caused it to go over 80 characters. Signed-off-by: Palmer Dabbelt Acked-by: Nicolas Ferre Signed-off-by: David S. Miller

net: macb: Kconfig: Make MACB depend on COMMON_CLK

2019-06-26T21:09:32Z

commit c218ad559020 ("macb: Add support for SiFive FU540-C000") added a dependency on the common clock framework to the macb driver, but didn't express that dependency in Kconfig. As a result macb now fails to compile on systems without COMMON_CLK, which specifically causes a build failure on powerpc allyesconfig. This patch adds the dependency, which results in the macb driver no longer being selectable on systems without the common clock framework. All known systems that have this device already support the common clock framework, so this should not cause trouble for any uses. Supporting both the FU540-C000 and systems without COMMON_CLK is quite ugly. I've build tested this on powerpc allyesconfig and RISC-V defconfig (which selects MACB), but I have not even booted the resulting kernels. Fixes: c218ad559020 ("macb: Add support for SiFive FU540-C000") Signed-off-by: Palmer Dabbelt Acked-by: Nicolas Ferre Signed-off-by: David S. Miller

treewide: Add SPDX license identifier - Makefile/Kconfig

2019-05-21T08:50:46Z

Add SPDX license identifiers to all Make/Kconfig files which: - Have no license information of any form These files fall under the project license, GPL v2 only. The resulting SPDX license identifier is: GPL-2.0-only Signed-off-by: Thomas Gleixner Signed-off-by: Greg Kroah-Hartman

net: ethernet: Add missing VENDOR to Cadence and Packet Engines symbols

2018-07-05T11:05:54Z

The vendor guard Kconfig symbols for Cadence and Packet Engines use a "NET_" prefix, while all other vendor guards use a "NET_VENDOR_" prefix. Hence make them consistent with the rest, and add the missing trailing "S" for Packet Engines while at it. As these options don't directly affect the kernel build, and default to "y", this change has no impact on kernels built with existing (def)configs. Signed-off-by: Geert Uytterhoeven Signed-off-by: David S. Miller

net: macb: Add support for PTP timestamps in DMA descriptors

2017-06-30T17:11:41Z

This patch adds support for PTP timestamps in DMA buffer descriptors. It checks capability at runtime and uses appropriate buffer descriptor. Signed-off-by: Rafal Ozieblo Signed-off-by: David S. Miller