linux-dev/drivers/net/ethernet/microchip, branch master

net: lan966x: Fix unmapping of received frames using FDMA

2022-11-02T04:20:30Z

When lan966x was receiving a frame, then it was building the skb and after that it was calling dma_unmap_single with frame size as the length. This actually has 2 issues: 1. It is using a length to map and a different length to unmap. 2. When the unmap was happening, the data was sync for cpu but it could be that this will overwrite what build_skb was initializing. The fix for these two problems is to change the order of operations. First to sync the frame for cpu, then to build the skb and in the end to unmap using the correct size but without sync the frame again for cpu. Fixes: c8349639324a ("net: lan966x: Add FDMA functionality") Signed-off-by: Horatiu Vultur Link: https://lore.kernel.org/r/20221031133421.1283196-1-horatiu.vultur@microchip.com Signed-off-by: Jakub Kicinski

net: lan966x: Fix FDMA when MTU is changed

2022-11-02T04:18:16Z

When MTU is changed, FDMA is required to calculate what is the maximum size of the frame that it can received. So it can calculate what is the page order needed to allocate for the received frames. The first problem was that, when the max MTU was calculated it was reading the value from dev and not from HW, so in this way it was missing L2 header + the FCS. The other problem was that once the skb is created using __build_skb_around, it would reserve some space for skb_shared_info. So if we received a frame which size is at the limit of the page order then the creating will failed because it would not have space to put all the data. Fixes: 2ea1cbac267e ("net: lan966x: Update FDMA to change MTU.") Signed-off-by: Horatiu Vultur Signed-off-by: Jakub Kicinski

net: lan966x: Adjust maximum frame size when vlan is enabled/disabled

2022-11-02T04:18:16Z

When vlan filtering is enabled/disabled, it is required to adjust the maximum received frame size that it can received. When vlan filtering is enabled, it would all to receive extra 4 bytes, that are the vlan tag. So the maximum frame size would be 1522 with a vlan tag. If vlan filtering is disabled then the maximum frame size would be 1518 regardless if there is or not a vlan tag. Fixes: 6d2c186afa5d ("net: lan966x: Add vlan support.") Signed-off-by: Horatiu Vultur Signed-off-by: Jakub Kicinski

net: lan966x: Fix the MTU calculation

2022-11-02T04:18:16Z

When the MTU was changed, the lan966x didn't take in consideration the L2 header and the FCS. So the HW was configured with a smaller value than what was desired. Therefore the correct value to configure the HW would be new_mtu + ETH_HLEN + ETH_FCS_LEN. The vlan tag is not considered here, because at the time when the blamed commit was added, there was no vlan filtering support. The vlan fix will be part of the next patch. Fixes: d28d6d2e37d1 ("net: lan966x: add port module support") Signed-off-by: Horatiu Vultur Signed-off-by: Jakub Kicinski

net: lan966x: Stop replacing tx dcbs and dcbs_buf when changing MTU

2022-10-25T04:04:51Z

When a frame is sent using FDMA, the skb is mapped and then the mapped address is given to an tx dcb that is different than the last used tx dcb. Once the HW finish with this frame, it would generate an interrupt and then the dcb can be reused and memory can be freed. For each dcb there is an dcb buf that contains some meta-data(is used by PTP, is it free). There is 1 to 1 relationship between dcb and dcb_buf. The following issue was observed. That sometimes after changing the MTU to allocate new tx dcbs and dcbs_buf, two frames were not transmitted. The frames were not transmitted because when reloading the tx dcbs, it was always presuming to use the first dcb but that was not always happening. Because it could be that the last tx dcb used before changing MTU was first dcb and then when it tried to get the next dcb it would take dcb 1 instead of 0. Because it is supposed to take a different dcb than the last used one. This can be fixed simply by changing tx->last_in_use to -1 when the fdma is disabled to reload the new dcb and dcbs_buff. But there could be a different issue. For example, right after the frame is sent, the MTU is changed. Now all the dcbs and dcbs_buf will be cleared. And now get the interrupt from HW that it finished with the frame. So when we try to clear the skb, it is not possible because we lost all the dcbs_buf. The solution here is to stop replacing the tx dcbs and dcbs_buf when changing MTU because the TX doesn't care what is the MTU size, it is only the RX that needs this information. Fixes: 2ea1cbac267e ("net: lan966x: Update FDMA to change MTU.") Signed-off-by: Horatiu Vultur Link: https://lore.kernel.org/r/20221021090711.3749009-1-horatiu.vultur@microchip.com Signed-off-by: Jakub Kicinski

net: lan966x: Fix the rx drop counter

2022-10-21T04:08:54Z

Currently the rx drop is calculated as the sum of multiple HW drop counters. The issue is that not all the HW drop counters were added for the rx drop counter. So if for example you have a police that drops frames, they were not see in the rx drop counter. Fix this by updating how the rx drop counter is calculated. It is required to add also RX_RED_PRIO_* HW counters. Fixes: 12c2d0a5b8e2 ("net: lan966x: add ethtool configuration and statistics") Signed-off-by: Horatiu Vultur Link: https://lore.kernel.org/r/20221019083056.2744282-1-horatiu.vultur@microchip.com Signed-off-by: Jakub Kicinski

Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net

2022-10-04T00:44:18Z

Merge in the left-over fixes before the net-next pull-request. Conflicts: drivers/net/ethernet/mediatek/mtk_ppe.c ae3ed15da588 ("net: ethernet: mtk_eth_soc: fix state in __mtk_foe_entry_clear") 9d8cb4c096ab ("net: ethernet: mtk_eth_soc: add foe_entry_size to mtk_eth_soc") https://lore.kernel.org/all/6cb6893b-4921-a068-4c30-1109795110bb@tessares.net/ kernel/bpf/helpers.c 8addbfc7b308 ("bpf: Gate dynptr API behind CAP_BPF") 5679ff2f138f ("bpf: Move bpf_loop and bpf_for_each_map_elem under CAP_BPF") 8a67f2de9b1d ("bpf: expose bpf_strtol and bpf_strtoul to all program types") https://lore.kernel.org/all/20221003201957.13149-1-daniel@iogearbox.net/ Signed-off-by: Jakub Kicinski

net: lan966x: Fix return type of lan966x_port_xmit

2022-10-03T23:40:16Z

The ndo_start_xmit field in net_device_ops is expected to be of type netdev_tx_t (*ndo_start_xmit)(struct sk_buff *skb, struct net_device *dev). The mismatched return type breaks forward edge kCFI since the underlying function definition does not match the function hook definition. The return type of lan966x_port_xmit should be changed from int to netdev_tx_t. Reported-by: Dan Carpenter Link: https://github.com/ClangBuiltLinux/linux/issues/1703 Cc: llvm@lists.linux.dev Signed-off-by: Nathan Huckleberry Reviewed-by: Nathan Chancellor Link: https://lore.kernel.org/r/20220929182704.64438-1-nhuck@google.com Signed-off-by: Jakub Kicinski

net: lan966x: Add port mirroring support using tc-matchall

2022-10-03T11:46:46Z

Add support for port mirroring. It is possible to mirror only one port at a time and it is possible to have both ingress and egress mirroring. Frames injected by the CPU don't get egress mirrored because they are bypassing the analyzer module. Signed-off-by: Horatiu Vultur Signed-off-by: David S. Miller

net: lan966x: Add port police support using tc-matchall

2022-10-03T11:46:46Z

Add support for port police. It is possible to police only on the ingress side. To be able to add police support also it was required to add tc-matchall classifier offload support. Signed-off-by: Horatiu Vultur Signed-off-by: David S. Miller