linux-dev/drivers/net/ethernet/moxa, branch master

net: moxa: fix endianness-related issues from 'sparse'

2022-09-06T08:24:42Z

Sparse checker found two endianness-related issues: .../moxart_ether.c:34:15: warning: incorrect type in assignment (different base types) .../moxart_ether.c:34:15: expected unsigned int [usertype] .../moxart_ether.c:34:15: got restricted __le32 [usertype] .../moxart_ether.c:39:16: warning: cast to restricted __le32 Fix them by using __le32 type instead of u32. Signed-off-by: Sergei Antonov Link: https://lore.kernel.org/r/20220902125037.1480268-1-saproj@gmail.com Signed-off-by: Paolo Abeni

net: moxa: get rid of asymmetry in DMA mapping/unmapping

2022-08-23T01:15:44Z

Since priv->rx_mapping[i] is maped in moxart_mac_open(), we should unmap it from moxart_mac_stop(). Fixes 2 warnings. 1. During error unwinding in moxart_mac_probe(): "goto init_fail;", then moxart_mac_free_memory() calls dma_unmap_single() with priv->rx_mapping[i] pointers zeroed. WARNING: CPU: 0 PID: 1 at kernel/dma/debug.c:963 check_unmap+0x704/0x980 DMA-API: moxart-ethernet 92000000.mac: device driver tries to free DMA memory it has not allocated [device address=0x0000000000000000] [size=1600 bytes] CPU: 0 PID: 1 Comm: swapper Not tainted 5.19.0+ #60 Hardware name: Generic DT based system unwind_backtrace from show_stack+0x10/0x14 show_stack from dump_stack_lvl+0x34/0x44 dump_stack_lvl from __warn+0xbc/0x1f0 __warn from warn_slowpath_fmt+0x94/0xc8 warn_slowpath_fmt from check_unmap+0x704/0x980 check_unmap from debug_dma_unmap_page+0x8c/0x9c debug_dma_unmap_page from moxart_mac_free_memory+0x3c/0xa8 moxart_mac_free_memory from moxart_mac_probe+0x190/0x218 moxart_mac_probe from platform_probe+0x48/0x88 platform_probe from really_probe+0xc0/0x2e4 2. After commands: ip link set dev eth0 down ip link set dev eth0 up WARNING: CPU: 0 PID: 55 at kernel/dma/debug.c:570 add_dma_entry+0x204/0x2ec DMA-API: moxart-ethernet 92000000.mac: cacheline tracking EEXIST, overlapping mappings aren't supported CPU: 0 PID: 55 Comm: ip Not tainted 5.19.0+ #57 Hardware name: Generic DT based system unwind_backtrace from show_stack+0x10/0x14 show_stack from dump_stack_lvl+0x34/0x44 dump_stack_lvl from __warn+0xbc/0x1f0 __warn from warn_slowpath_fmt+0x94/0xc8 warn_slowpath_fmt from add_dma_entry+0x204/0x2ec add_dma_entry from dma_map_page_attrs+0x110/0x328 dma_map_page_attrs from moxart_mac_open+0x134/0x320 moxart_mac_open from __dev_open+0x11c/0x1ec __dev_open from __dev_change_flags+0x194/0x22c __dev_change_flags from dev_change_flags+0x14/0x44 dev_change_flags from devinet_ioctl+0x6d4/0x93c devinet_ioctl from inet_ioctl+0x1ac/0x25c v1 -> v2: Extraneous change removed. Fixes: 6c821bd9edc9 ("net: Add MOXA ART SoCs ethernet driver") Signed-off-by: Sergei Antonov Reviewed-by: Andrew Lunn Link: https://lore.kernel.org/r/20220819110519.1230877-1-saproj@gmail.com Signed-off-by: Jakub Kicinski

net: moxa: MAC address reading, generating, validity checking

2022-08-18T18:08:54Z

This device does not remember its MAC address, so add a possibility to get it from the platform. If it fails, generate a random address. This will provide a MAC address early during boot without user space being involved. Also remove extra calls to is_valid_ether_addr(). Made after suggestions by Andrew Lunn: 1) Use eth_hw_addr_random() to assign a random MAC address during probe. 2) Remove is_valid_ether_addr() from moxart_mac_open() 3) Add a call to platform_get_ethdev_address() during probe 4) Remove is_valid_ether_addr() from moxart_set_mac_address(). The core does this v1 -> v2: Handle EPROBE_DEFER returned from platform_get_ethdev_address(). Move MAC reading code to the beginning of the probe function. Signed-off-by: Sergei Antonov Suggested-by: Andrew Lunn CC: Yang Yingliang CC: Pavel Skripkin CC: Guobin Huang CC: Yang Wei CC: Christophe JAILLET Reviewed-by: Andrew Lunn Reviewed-by: Vladimir Oltean Link: https://lore.kernel.org/r/20220818092317.529557-1-saproj@gmail.com Signed-off-by: Jakub Kicinski

net: moxa: pass pdev instead of ndev to DMA functions

2022-08-16T02:54:27Z

dma_map_single() calls fail in moxart_mac_setup_desc_ring() and moxart_mac_start_xmit() which leads to an incessant output of this: [ 16.043925] moxart-ethernet 92000000.mac eth0: DMA mapping error [ 16.050957] moxart-ethernet 92000000.mac eth0: DMA mapping error [ 16.058229] moxart-ethernet 92000000.mac eth0: DMA mapping error Passing pdev to DMA is a common approach among net drivers. Fixes: 6c821bd9edc9 ("net: Add MOXA ART SoCs ethernet driver") Signed-off-by: Sergei Antonov Suggested-by: Andrew Lunn Reviewed-by: Andrew Lunn Link: https://lore.kernel.org/r/20220812171339.2271788-1-saproj@gmail.com Signed-off-by: Jakub Kicinski

eth: switch to netif_napi_add_weight()

2022-05-08T10:33:57Z

Switch all Ethernet drivers which use custom napi weights to the new API. Signed-off-by: Jakub Kicinski Signed-off-by: David S. Miller

net: moxa: use GFP_KERNEL

2022-02-11T22:39:08Z

Platform_driver probe functions aren't called with locks held and thus don't need GFP_ATOMIC. Use GFP_KERNEL instead. Problem found with Coccinelle. Signed-off-by: Julia Lawall Link: https://lore.kernel.org/r/20220210204223.104181-1-Julia.Lawall@inria.fr Signed-off-by: Jakub Kicinski

ethernet: use eth_hw_addr_set() for dev->addr_len cases

2021-10-05T12:16:48Z

Convert all Ethernet drivers from memcpy(... dev->addr_len) to eth_hw_addr_set(): @@ expression dev, np; @@ - memcpy(dev->dev_addr, np, dev->addr_len) + eth_hw_addr_set(dev, np) In theory addr_len may not be ETH_ALEN, but we don't expect non-Ethernet devices to live under this directory, and only the following cases of setting addr_len exist: - cxgb4 for mgmt device, and the drivers which set it to ETH_ALEN: s2io, mlx4, vxge. Signed-off-by: Jakub Kicinski Signed-off-by: David S. Miller

net: moxa: fix UAF in moxart_mac_probe

2021-07-09T18:01:01Z

In case of netdev registration failure the code path will jump to init_fail label: init_fail: netdev_err(ndev, "init failed\n"); moxart_mac_free_memory(ndev); irq_map_fail: free_netdev(ndev); return ret; So, there is no need to call free_netdev() before jumping to error handling path, since it can cause UAF or double-free bug. Fixes: 6c821bd9edc9 ("net: Add MOXA ART SoCs ethernet driver") Signed-off-by: Pavel Skripkin Signed-off-by: David S. Miller

net: moxa: Use devm_platform_get_and_ioremap_resource()

2021-06-07T21:08:30Z

Use devm_platform_get_and_ioremap_resource() to simplify code and avoid a null-ptr-deref by checking 'res' in it. Signed-off-by: Yang Yingliang Signed-off-by: David S. Miller

net: moxa: remove redundant dev_err call in moxart_mac_probe()

2021-03-29T01:06:50Z

There is a error message within devm_ioremap_resource already, so remove the dev_err call to avoid redundant error message. Reported-by: Hulk Robot Signed-off-by: Guobin Huang Signed-off-by: David S. Miller