linux-dev/drivers/net/ethernet/mscc/Makefile, branch master

net: mscc: ocelot: move stats code to ocelot_stats.c

2022-09-09T09:59:12Z

The main C file of the ocelot switch lib, ocelot.c, is getting larger and larger, and there are plans to add more logic related to stats. So it seems like an appropriate moment to split the statistics code to a new file. Signed-off-by: Vladimir Oltean Signed-off-by: David S. Miller

net: mscc: ocelot: sort Makefile files alphabetically

2022-09-09T09:59:12Z

Create a clear ordering of the files used to compile the switch lib and the switchdev driver. Signed-off-by: Vladimir Oltean Signed-off-by: David S. Miller

net: ocelot: add FDMA support

2021-12-11T04:56:58Z

Ethernet frames can be extracted or injected autonomously to or from the device’s DDR3/DDR3L memory and/or PCIe memory space. Linked list data structures in memory are used for injecting or extracting Ethernet frames. The FDMA generates interrupts when frame extraction or injection is done and when the linked lists need updating. The FDMA is shared between all the ethernet ports of the switch and uses a linked list of descriptors (DCB) to inject and extract packets. Before adding descriptors, the FDMA channels must be stopped. It would be inefficient to do that each time a descriptor would be added so the channels are restarted only once they stopped. Both channels uses ring-like structure to feed the DCBs to the FDMA. head and tail are never touched by hardware and are completely handled by the driver. On top of that, page recycling has been added and is mostly taken from gianfar driver. Reviewed-by: Vladimir Oltean Co-developed-by: Alexandre Belloni Signed-off-by: Alexandre Belloni Signed-off-by: Clément Léger Signed-off-by: Jakub Kicinski

net: mscc: ocelot: split register definitions to a separate file

2021-12-08T05:44:49Z

Move these to a separate file will allow them to be shared to other drivers. Signed-off-by: Colin Foster Reviewed-by: Vladimir Oltean Reviewed-by: Florian Fainelli Signed-off-by: Jakub Kicinski

net: mscc: ocelot: Add support for MRP

2021-02-16T22:47:46Z

Add basic support for MRP. The HW will just trap all MRP frames on the ring ports to CPU and allow the SW to process them. In this way it is possible to for this node to behave both as MRM and MRC. Current limitations are: - it doesn't support Interconnect roles. - it supports only a single ring. - the HW should be able to do forwarding of MRP Test frames so the SW will not need to do this. So it would be able to have the role MRC without SW support. Signed-off-by: Horatiu Vultur Signed-off-by: David S. Miller

net: mscc: ocelot: initialize watermarks to sane defaults

2021-01-16T04:02:34Z

This is meant to be a gentle introduction into the world of watermarks on ocelot. The code is placed in ocelot_devlink.c because it will be integrated with devlink, even if it isn't right now. My first step was intended to be to replicate the default configuration of the congestion watermarks programatically, since they are now going to be tuned by the user. But after studying and understanding through trial and error how they work, I now believe that the configuration used out of reset does not do justice to the word "reservation", since the sum of all reservations exceeds the total amount of resources (otherwise said, all reservations cannot be fulfilled at the same time, which means that, contrary to the reference manual, they don't guarantee anything). As an example, here's a dump of the reservation watermarks for frame buffers, for port 0 (for brevity, the ports 1-6 were omitted, but they have the same configuration): BUF_Q_RSRV_I(port 0, prio 0) = max 3000 bytes BUF_Q_RSRV_I(port 0, prio 1) = max 3000 bytes BUF_Q_RSRV_I(port 0, prio 2) = max 3000 bytes BUF_Q_RSRV_I(port 0, prio 3) = max 3000 bytes BUF_Q_RSRV_I(port 0, prio 4) = max 3000 bytes BUF_Q_RSRV_I(port 0, prio 5) = max 3000 bytes BUF_Q_RSRV_I(port 0, prio 6) = max 3000 bytes BUF_Q_RSRV_I(port 0, prio 7) = max 3000 bytes Otherwise said, every port-tc has an ingress reservation of 3000 bytes, and there are 7 ports in VSC9959 Felix (6 user ports and 1 CPU port). Concentrating only on the ingress reservations, there are, in total, 8 [traffic classes] x 7 [ports] x 3000 [bytes] = 168,000 bytes of memory reserved on ingress. But, surprise, Felix only has 128 KB of packet buffer in total... A similar thing happens with Seville, which has a larger packet buffer, but also more ports, and the default configuration is also overcommitted. This patch disables the (apparently) bogus reservations and moves all resources to the shared area. This way, real reservations can be set up by the user, using devlink-sb. Signed-off-by: Vladimir Oltean Reviewed-by: Florian Fainelli Signed-off-by: Jakub Kicinski

net: mscc: ocelot: rename ocelot_ace.{c, h} to ocelot_vcap.{c,h}

2020-06-21T00:25:23Z

Access Control Lists (and their respective Access Control Entries) are specifically entries in the VCAP IS2, the security enforcement block, according to the documentation. Let's rename the files that deal with generic operations on the VCAP TCAM, so that VCAP IS1 and ES0 can reuse the same code without confusion. Signed-off-by: Vladimir Oltean Signed-off-by: David S. Miller

net: mscc: ocelot: move net_device related functions to ocelot_net.c

2020-06-21T00:25:23Z

The ocelot hardware library shouldn't contain too much net_device specific code, since it is shared with DSA which abstracts that structure away. So much as much of this code as possible into the mscc_ocelot driver and outside of the common library. We're making an exception for MDB and LAG code. That is not yet exported to DSA, but when it will, most of the code that's already in ocelot.c will remain there. So, there's no point in moving code to ocelot_net.c just to move it back later. We could have moved all net_device code to ocelot_vsc7514.c directly, but let's operate under the assumption that if a new switchdev ocelot driver gets added, it'll define its SoC-specific stuff in a new ocelot_vsc*.c file and it'll reuse the rest of the code. Signed-off-by: Vladimir Oltean Signed-off-by: David S. Miller

net: mscc: ocelot: move ocelot_regs.c into ocelot_vsc7514.c

2020-06-21T00:25:23Z

ocelot_regs.c actually shouldn't be part of the common library. It describes the register map of the VSC7514 switch. The way ocelot switches work, they'll have highly optimized register maps, so another SoC will likely have the same registers but laid out completely different in memory (so there's little room for reusing this structure). So move it to ocelot_vsc7514.c instead. Signed-off-by: Vladimir Oltean Signed-off-by: David S. Miller

net: mscc: ocelot: rename MSCC_OCELOT_SWITCH_OCELOT to MSCC_OCELOT_SWITCH

2020-06-21T00:25:23Z

Putting 'ocelot' in the config's name twice just to say that 'it's the ocelot driver running on the ocelot SoC' is a bit confusing. Instead, it's just the ocelot driver. Now that we've renamed the previous symbol that was holding the MSCC_OCELOT_SWITCH_OCELOT into *_LIB (because that's what it is), we're free to use this name for the driver. Signed-off-by: Vladimir Oltean Signed-off-by: David S. Miller