linux-dev/drivers/net/ethernet/ti/Kconfig, branch master

net: ethernet: ti: davinci_mdio: fix build for mdio bitbang uses

2022-08-25T01:44:24Z

davinci_mdio.c uses mdio bitbang APIs, so it should select MDIO_BITBANG to prevent build errors. arm-linux-gnueabi-ld: drivers/net/ethernet/ti/davinci_mdio.o: in function `davinci_mdio_remove': drivers/net/ethernet/ti/davinci_mdio.c:649: undefined reference to `free_mdio_bitbang' arm-linux-gnueabi-ld: drivers/net/ethernet/ti/davinci_mdio.o: in function `davinci_mdio_probe': drivers/net/ethernet/ti/davinci_mdio.c:545: undefined reference to `alloc_mdio_bitbang' arm-linux-gnueabi-ld: drivers/net/ethernet/ti/davinci_mdio.o: in function `davinci_mdiobb_read': drivers/net/ethernet/ti/davinci_mdio.c:236: undefined reference to `mdiobb_read' arm-linux-gnueabi-ld: drivers/net/ethernet/ti/davinci_mdio.o: in function `davinci_mdiobb_write': drivers/net/ethernet/ti/davinci_mdio.c:253: undefined reference to `mdiobb_write' Fixes: d04807b80691 ("net: ethernet: ti: davinci_mdio: Add workaround for errata i2329") Signed-off-by: Randy Dunlap Cc: Grygorii Strashko Cc: Ravi Gunasekaran Cc: Eric Dumazet Cc: Paolo Abeni Cc: Naresh Kamboju Cc: Sudip Mukherjee (Codethink) Link: https://lore.kernel.org/r/20220824024216.4939-1-rdunlap@infradead.org Signed-off-by: Jakub Kicinski

net: ethernet: ti: am65-cpsw: Fix build error without PHYLINK

2022-04-12T03:49:10Z

If PHYLINK is n, build fails: drivers/net/ethernet/ti/am65-cpsw-ethtool.o: In function `am65_cpsw_set_link_ksettings': am65-cpsw-ethtool.c:(.text+0x118): undefined reference to `phylink_ethtool_ksettings_set' drivers/net/ethernet/ti/am65-cpsw-ethtool.o: In function `am65_cpsw_get_link_ksettings': am65-cpsw-ethtool.c:(.text+0x138): undefined reference to `phylink_ethtool_ksettings_get' drivers/net/ethernet/ti/am65-cpsw-ethtool.o: In function `am65_cpsw_set_eee': am65-cpsw-ethtool.c:(.text+0x158): undefined reference to `phylink_ethtool_set_eee' Select PHYLINK for TI_K3_AM65_CPSW_NUSS to fix this. Fixes: e8609e69470f ("net: ethernet: ti: am65-cpsw: Convert to PHYLINK") Signed-off-by: YueHaibing Reviewed-by: Russell King (Oracle) Link: https://lore.kernel.org/r/20220409105931.9080-1-yuehaibing@huawei.com Signed-off-by: Jakub Kicinski

net: ti: am65-cpsw-nuss: Add devlink support

2021-02-12T01:52:13Z

AM65 NUSS ethernet switch on K3 devices can be configured to work either in independent mac mode where each port acts as independent network interface (multi mac) or switch mode. Add devlink hooks to provide a way to switch b/w these modes. Rationale to use devlink instead of defaulting to bridge mode is that SoC use cases require to support multiple independent MAC ports with no switching so that users can use software bridges with multi-mac configuration (e.g: to support LAG, HSR/PRP, etc). Also, switching between multi mac and switch mode requires significant Port and ALE reconfiguration, therefore is easier to be made as part of mode change devlink hooks. It also allows to keep user interface similar to what was implemented for the previous generation of TI CPSW IP (on AM33/AM43/AM57 SoCs). Signed-off-by: Vignesh Raghavendra Signed-off-by: David S. Miller

docs: networking: reorganize driver documentation again

2020-06-26T23:08:44Z

Organize driver documentation by device type. Most documents have fairly verbose yet uninformative names, so let users first select a well defined device type, and then search for a particular driver. While at it rename the section from Vendor drivers to Hardware drivers. This seems more accurate, besides people sometimes refer to out-of-tree drivers as vendor drivers. Signed-off-by: Jakub Kicinski Acked-by: Jeff Kirsher Acked-by: Shannon Nelson Signed-off-by: David S. Miller

treewide: replace '---help---' in Kconfig files with 'help'

2020-06-13T16:57:21Z

Since commit 84af7a6194e4 ("checkpatch: kconfig: prefer 'help' over '---help---'"), the number of '---help---' has been gradually decreasing, but there are still more than 2400 instances. This commit finishes the conversion. While I touched the lines, I also fixed the indentation. There are a variety of indentation styles found. a) 4 spaces + '---help---' b) 7 spaces + '---help---' c) 8 spaces + '---help---' d) 1 space + 1 tab + '---help---' e) 1 tab + '---help---' (correct indentation) f) 1 tab + 1 space + '---help---' g) 1 tab + 2 spaces + '---help---' In order to convert all of them to 1 tab + 'help', I ran the following commend: $ find . -name 'Kconfig*' | xargs sed -i 's/^[[:space:]]*---help---/\thelp/' Signed-off-by: Masahiro Yamada

Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net

2020-05-15T20:48:59Z

Move the bpf verifier trace check into the new switch statement in HEAD. Resolve the overlapping changes in hinic, where bug fixes overlap the addition of VF support. Signed-off-by: David S. Miller

ethernet: ti: am65-cpsw-qos: add TAPRIO offload support

2020-05-15T00:33:30Z

AM65 CPSW h/w supports Enhanced Scheduled Traffic (EST – defined in P802.1Qbv/D2.2 that later got included in IEEE 802.1Q-2018) configuration. EST allows express queue traffic to be scheduled (placed) on the wire at specific repeatable time intervals. In Linux kernel, EST configuration is done through tc command and the taprio scheduler in the net core implements a software only scheduler (SCH_TAPRIO). If the NIC is capable of EST configuration, user indicate "flag 2" in the command which is then parsed by taprio scheduler in net core and indicate that the command is to be offloaded to h/w. taprio then offloads the command to the driver by calling ndo_setup_tc() ndo ops. This patch implements ndo_setup_tc() to offload EST configuration to CPSW h/w. Currently driver supports only SetGateStates operation. EST operates on a repeating time interval generated by the CPTS EST function generator. Each Ethernet port has a global EST fetch RAM that can be configured as 2 buffers, each of 64 locations or one large buffer of 128 locations. In 2 buffer configuration, a ping pong mechanism is used to hold the active schedule (oper) in one buffer and new (admin) command in the other. Each 22-bit fetch command consists of a 14-bit fetch count (14 MSB’s) and an 8-bit priority fetch allow (8 LSB’s) that will be applied for the fetch count time in wireside clocks. Driver process each of the sched-entry in the offload command and update the fetch RAM. Driver configures duration in sched-entry into the fetch count and Gate mask into the priority fetch bits of the RAM. Then configures the CPTS EST function generator to activate the schedule. Currently driver supports only 2 buffer configuration which means driver supports a max cycle time of ~8 msec. CPSW supports a configurable number of priority queues (up to 8) and needs to be switched to this mode from the default round robin mode before EST can be offloaded. User configures these through ethtool commands (-L for changing number of queues and --set-priv-flags to disable round robin mode). Driver doesn't enable EST if pf_p0_rx_ptype_rrobin privat flag is set. The flag is common for all ports, and so can't be just overridden by taprio configuration w/o user involvement. Command fails if pf_p0_rx_ptype_rrobin is already set in the driver. Scheds (commands) configuration depends on interface speed so driver translates the duration to the fetch count based on link speed. Each schedule can be constructed with several command entries in fetch RAM depending on interval. For example if each sched has timer interval < ~130us on 1000 Mb link then each sched consumes one command and have 1:1 mapping. When Ethernet link goes down, driver purge the configuration if link is down for more than 1 second. The patch allows to update the timer and scheds memory only if it's really needed, and skip cases required the user to stop timer by configuring only shceds memory. Signed-off-by: Ivan Khoronzhuk Signed-off-by: Murali Karicheri Signed-off-by: David S. Miller

net: ethernet: ti: Remove TI_CPTS_MOD workaround

2020-05-12T19:33:27Z

My recent commit b6d49cab44b5 ("net: Make PTP-specific drivers depend on PTP_1588_CLOCK") exposes a missing dependency in defconfigs that select TI_CPTS without selecting PTP_1588_CLOCK, leading to linker errors of the form: drivers/net/ethernet/ti/cpsw.o: in function `cpsw_ndo_stop': cpsw.c:(.text+0x680): undefined reference to `cpts_unregister' ... That's because TI_CPTS_MOD (which is the symbol gating the _compilation_ of cpts.c) now depends on PTP_1588_CLOCK, and so is not enabled in these configurations, but TI_CPTS (which is the symbol gating _calls_ to the cpts functions) _is_ enabled. So we end up compiling calls to functions that don't exist, resulting in the linker errors. This patch fixes build errors and restores previous behavior by: - ensure PTP_1588_CLOCK=y in TI specific configs and CPTS will be built - remove TI_CPTS_MOD and, instead, add dependencies from CPTS in TI_CPSW/TI_KEYSTONE_NETCP/TI_CPSW_SWITCHDEV as below: config TI_CPSW_SWITCHDEV ... depends on TI_CPTS || !TI_CPTS which will ensure proper dependencies PTP_1588_CLOCK -> TI_CPTS -> TI_CPSW/TI_KEYSTONE_NETCP/TI_CPSW_SWITCHDEV and build type selection. Note. For NFS boot + CPTS all of above configs have to be built-in. Cc: Arnd Bergmann Cc: Dan Murphy Cc: Tony Lindgren Fixes: b6d49cab44b5 ("net: Make PTP-specific drivers depend on PTP_1588_CLOCK") Reported-by: kbuild test robot Signed-off-by: Clay McClure [grygorii.strashko@ti.com: rewording, add deps cpsw/netcp from cpts, drop IS_REACHABLE] Signed-off-by: Grygorii Strashko Reviewed-by: Arnd Bergmann Tested-by: Tony Lindgren Signed-off-by: David S. Miller

Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net

2020-05-07T05:10:13Z

Conflicts were all overlapping changes. Signed-off-by: David S. Miller

net: ethernet: ti: am65-cpts: fix build

2020-05-05T20:24:45Z

It's possible to have build configuration which will force PTP_1588_CLOCK=m and so TI_K3_AM65_CPTS=m while still have TI_K3_AM65_CPSW_NUSS=y. This will cause build failures: aarch64-linux-gnu-ld: ../drivers/net/ethernet/ti/am65-cpsw-nuss.o: in function `am65_cpsw_init_cpts': ../drivers/net/ethernet/ti/am65-cpsw-nuss.c:1685: undefined reference to `am65_cpts_create' aarch64-linux-gnu-ld: ../drivers/net/ethernet/ti/am65-cpsw-nuss.c:1685:(.text+0x2e20): relocation truncated to fit: R_AARCH64_CALL26 against undefined symbol `am65_cpts_create' Fix it by adding dependencies from CPTS in TI_K3_AM65_CPSW_NUSS as below: config TI_K3_AM65_CPSW_NUSS ... depends on TI_K3_AM65_CPTS || !TI_K3_AM65_CPTS Note. This will create below dependencies and for NFS boot + CPTS all of them have to be built-in. PTP_1588_CLOCK -> TI_K3_AM65_CPTS -> TI_K3_AM65_CPSW_NUSS While here, clean up TI_K3_AM65_CPTS definition. Fixes: b1f66a5bee07 ("net: ethernet: ti: am65-cpsw-nuss: enable packet timestamping support") Signed-off-by: Grygorii Strashko Reported-by: Anders Roxell Tested-by: Anders Roxell Signed-off-by: David S. Miller