linux-dev/drivers/net/ipa, branch linus/master

net: ipa: fix page free in ipa_endpoint_replenish_one()

2022-05-28T01:29:50Z

Currently the (possibly compound) pages used for receive buffers are freed using __free_pages(). But according to this comment above the definition of that function, that's wrong: If you want to use the page's reference count to decide when to free the allocation, you should allocate a compound page, and use put_page() instead of __free_pages(). Convert the call to __free_pages() in ipa_endpoint_replenish_one() to use put_page() instead. Fixes: 6a606b90153b8 ("net: ipa: allocate transaction in replenish loop") Signed-off-by: Alex Elder Signed-off-by: Jakub Kicinski

net: ipa: fix page free in ipa_endpoint_trans_release()

2022-05-28T01:29:50Z

Currently the (possibly compound) page used for receive buffers are freed using __free_pages(). But according to this comment above the definition of that function, that's wrong: If you want to use the page's reference count to decide when to free the allocation, you should allocate a compound page, and use put_page() instead of __free_pages(). Convert the call to __free_pages() in ipa_endpoint_trans_release() to use put_page() instead. Fixes: ed23f02680caa ("net: ipa: define per-endpoint receive buffer size") Signed-off-by: Alex Elder Signed-off-by: Jakub Kicinski

net: ipa: use data space for command opcodes

2022-05-22T19:46:12Z

The 64-bit data field in a transaction is not used for commands. And the opcode array is *only* used for commands. They're (currently) the same size; save a little space in the transaction structure by enclosing the two fields in a union. Signed-off-by: Alex Elder Signed-off-by: David S. Miller

net: ipa: remove command info pool

2022-05-22T19:46:12Z

The ipa_cmd_info structure now contains only one field, and it's an enumerated type whose values all fit in 8 bits. Currently we'll never use more than 8 TREs in a command transaction, and we can represent that number of command opcodes in the same space as a 64 bit pointer to an ipa_cmd_info structure. Define IPA_COMMAND_TRANS_TRE_MAX as the maximum number of TREs that can be in a command transaction. Replace the info pointer in a transaction with a fixed-size array named cmd_opcode[] of that many bytes. Store the opcode in this array when adding a command TRE to a transaction, as was done previously for the info array. This makes the ipa_cmd_info unused, so get rid of it. When committing an immediate command transaction, use the channel's Boolean command flag to determine whether to fill in the opcode, which will be taken (as before) from the array in the transaction. This makes the command info pool unnecessary, so get rid of it. Signed-off-by: Alex Elder Signed-off-by: David S. Miller

net: ipa: remove command direction argument

2022-05-22T19:46:12Z

We no longer use the direction argument for gsi_trans_cmd_add(), so get rid of it in its definition, and in its seven callers. Signed-off-by: Alex Elder Signed-off-by: David S. Miller

net: ipa: get rid of ipa_cmd_info->direction

2022-05-22T19:46:12Z

The direction field of the ipa_cmd_info structure is set, but never used. It seems it might have been used for the DMA_SHARED_MEM immediate command, but the DIRECTION flag is set based on the value of the passed-in direction flag there. Anyway, remove this unused field from the ipa_cmd_info structure. This is done as a separate patch to make it very obvious that it's not required. Signed-off-by: Alex Elder Signed-off-by: David S. Miller

net: ipa: count the number of modem TX endpoints

2022-05-22T19:46:12Z

In ipa_endpoint_modem_exception_reset_all(), a high estimate was made of the number of endpoints that need their status register updated. We only used what was needed, so the high estimate didn't matter much. However the next few patches are going to limit the number of commands in a single transaction, and the overestimate would exceed that. So count the number of modem TX endpoints at initialization time, and use it in ipa_endpoint_modem_exception_reset_all(). Signed-off-by: Alex Elder Signed-off-by: David S. Miller

net: ipa: kill gsi_trans_commit_wait_timeout()

2022-05-22T19:46:12Z

Since the beginning gsi_trans_commit_wait_timeout() has existed to provide a way to allow waiting a limited time for a transaction to complete. But that function has never been used. In fact, there is no use for this function, because a transaction committed to hardware should *always* complete. The only reason it might not complete is if there were a hardware failure, or perhaps a system configuration error. Furthermore, if a timeout ever did occur, the IPA hardware would be in an indeterminate state, from which there is no recovery. It would require some sort of complete IPA reset, and would require the participation of the modem, and at this time there is no such sequence defined. So get rid of the definition of gsi_trans_commit_wait_timeout(), and update a few comments accordingly. Signed-off-by: Alex Elder Signed-off-by: David S. Miller

net: ipa: specify RX aggregation time limit in config data

2022-05-22T19:46:12Z

Don't assume that a 500 microsecond time limit should be used for all receive endpoints that support aggregation. Instead, specify the time limit to use in the configuration data. Set a 500 microsecond limit for all existing RX endpoints, as before. Checking for overflow for the time limit field is a bit complicated. Rather than duplicate a lot of code in ipa_endpoint_data_valid_one(), call WARN() if any value is found to be too large when encoding it. Signed-off-by: Alex Elder Signed-off-by: David S. Miller

net: ipa: support hard aggregation limits

2022-05-22T19:46:12Z

Add a new flag for AP receive endpoints that indicates whether a "hard limit" is used as a criterion for closing aggregation. Add comments explaining the difference between "hard" and "soft" aggregation limits. Pass a flag to ipa_aggr_size_kb() so it computes the proper aggregation size value whether using hard or soft limits. Move that function earlier in "ipa_endpoint.c" so it can be used without a forward-reference. Update ipa_endpoint_data_valid_one() so it validates endpoints whose data indicate a hard aggregation limit is used, and so it reports set aggregation flags for endpoints without aggregation enabled. Signed-off-by: Alex Elder Signed-off-by: David S. Miller