Linux kernel development work - see feature branches https://git.zx2c4.com/linux-dev/atom/drivers/net/wireless/mediatek/mt76/mt76x0?h=master 2022-03-16T16:40:22Z 2022-03-16T16:40:22Z Lorenzo Bianconi lorenzo@kernel.org 2022-03-14T15:10:25Z urn:sha1:6cb596ba84e307930836e9533a48792095f0dd42 Introduce __mt76u_init unitility routine and move mt7615 usb bus ops into mt7615 module in order to allow specifying driver specific parameter. This is a preliminary patch to add usb support to mt7921 driver. Tested-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name> 2021-12-19T14:24:00Z Lorenzo Bianconi lorenzo@kernel.org 2021-11-21T12:12:25Z urn:sha1:633f77b517ac704086c267b70a6dfe1924cfed0b Add SAR spec support to mt76x02 driver to allow configuring SAR power limitations on the frequency ranges from the userland. Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name> 2021-10-20T08:37:01Z Richard Huynh voxlympha@gmail.com 2021-09-07T08:58:24Z urn:sha1:d387cde7af84a5100bd717bb7359e9b30d95587d Appears to have incorrectly offset 0x120 + 0x12 instead of 12 decimal, leading to bogus power values being used. Signed-off-by: Richard Huynh <voxlympha@gmail.com> Signed-off-by: Felix Fietkau <nbd@nbd.name> 2021-10-20T08:36:39Z Felix Fietkau nbd@nbd.name 2021-09-24T15:54:40Z urn:sha1:970be1dff26dc387591688a08e4c21ebd13c3fc2 napi_schedule() can call __raise_softirq_irqoff(), which can perform softirq handling, so it must not be called in a pure process context with BH enabled. Signed-off-by: Felix Fietkau <nbd@nbd.name> 2021-10-20T08:36:39Z Christophe JAILLET christophe.jaillet@wanadoo.fr 2021-08-22T07:39:45Z urn:sha1:a2e759612e5ff3858856fe97be5245eecb84e29b The wrappers in include/linux/pci-dma-compat.h should go away. The patch has been generated with the coccinelle script below. It has been compile tested. @@ @@ - PCI_DMA_BIDIRECTIONAL + DMA_BIDIRECTIONAL @@ @@ - PCI_DMA_TODEVICE + DMA_TO_DEVICE @@ @@ - PCI_DMA_FROMDEVICE + DMA_FROM_DEVICE @@ @@ - PCI_DMA_NONE + DMA_NONE @@ expression e1, e2, e3; @@ - pci_alloc_consistent(e1, e2, e3) + dma_alloc_coherent(&e1->dev, e2, e3, GFP_) @@ expression e1, e2, e3; @@ - pci_zalloc_consistent(e1, e2, e3) + dma_alloc_coherent(&e1->dev, e2, e3, GFP_) @@ expression e1, e2, e3, e4; @@ - pci_free_consistent(e1, e2, e3, e4) + dma_free_coherent(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_map_single(e1, e2, e3, e4) + dma_map_single(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_unmap_single(e1, e2, e3, e4) + dma_unmap_single(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4, e5; @@ - pci_map_page(e1, e2, e3, e4, e5) + dma_map_page(&e1->dev, e2, e3, e4, e5) @@ expression e1, e2, e3, e4; @@ - pci_unmap_page(e1, e2, e3, e4) + dma_unmap_page(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_map_sg(e1, e2, e3, e4) + dma_map_sg(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_unmap_sg(e1, e2, e3, e4) + dma_unmap_sg(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_dma_sync_single_for_cpu(e1, e2, e3, e4) + dma_sync_single_for_cpu(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_dma_sync_single_for_device(e1, e2, e3, e4) + dma_sync_single_for_device(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_dma_sync_sg_for_cpu(e1, e2, e3, e4) + dma_sync_sg_for_cpu(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_dma_sync_sg_for_device(e1, e2, e3, e4) + dma_sync_sg_for_device(&e1->dev, e2, e3, e4) @@ expression e1, e2; @@ - pci_dma_mapping_error(e1, e2) + dma_mapping_error(&e1->dev, e2) @@ expression e1, e2; @@ - pci_set_dma_mask(e1, e2) + dma_set_mask(&e1->dev, e2) @@ expression e1, e2; @@ - pci_set_consistent_dma_mask(e1, e2) + dma_set_coherent_mask(&e1->dev, e2) Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Signed-off-by: Felix Fietkau <nbd@nbd.name> 2021-06-19T07:22:44Z Lorenzo Bianconi lorenzo@kernel.org 2021-05-07T10:26:11Z urn:sha1:47cbf73cf924ce2202332f61e705f4ed9bd6a74e BIT(0) in MT_EE_NIC_CONF_1 is use to notify the driver if the radio RF switch is controlled through a gpio. Use dev_debug instead of dev_err to log this info. Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name> 2021-05-15T11:46:59Z Lorenzo Bianconi lorenzo@kernel.org 2021-05-07T16:50:19Z urn:sha1:509559c35bcd23d5a046624b225cb3e99a9f1481 Similar to usb device, re-initialize mt76x0e device after resume in order to fix mt7630e hang during suspend/resume Reported-by: Luca Trombin <luca.trombin@gmail.com> Fixes: c2a4d9fbabfb9 ("mt76x0: inital split between pci and usb") Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/4812f9611624b34053c1592fd9c175b67d4ffcb4.1620406022.git.lorenzo@kernel.org 2021-04-11T22:01:23Z Eric Y.Y. Wong eric.wongyeungyan@gmail.com 2021-03-03T03:43:52Z urn:sha1:51bf9d60fb927b850ec2abdc1f9f72de523098a3 There are two variants of TP-Link Archer T2UHP V1, which are US and UN: https://www.tp-link.com/us/support/download/archer-t2uhp/ https://www.tp-link.com/hk/support/download/archer-t2uhp/v1/ From the driver source code provided by the vendor: https://www.tp-link.com/hk/support/download/archer-t2uhp/v1/#Driver eric@eric-VirtualBox:~/src$ grep -n USB_DEVICE.*0x2357 DPA_mt7610u_wifi_sta_v3004_rev1_20140529/NETIF/common/rtusb_dev_id.c 45: {USB_DEVICE(0x2357,0x0105)}, /* T1Uv1 */ 46: {USB_DEVICE(0x2357,0x010B)}, /* T2UHP_UN_v1 */ 47: {USB_DEVICE(0x2357,0x0123)}, /* T2UHP_US_v1 */ eric@eric-VirtualBox:~/src$ lsusb -d 2357: Bus 001 Device 003: ID 2357:010b TP-Link WiFi eric@eric-VirtualBox:~/src$ sudo modprobe mt76x0u eric@eric-VirtualBox:~/src$ sudo sh -c "echo 2357 010b > /sys/bus/usb/drivers/mt76x0u/new_id" [snip] eric@eric-VirtualBox:~/src$ ifconfig -a enp0s3: flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 1500 ether 08:00:27:74:d9:ee txqueuelen 1000 (Ethernet) RX packets 78 bytes 16146 (16.1 KB) RX errors 0 dropped 0 overruns 0 frame 0 TX packets 75 bytes 8413 (8.4 KB) TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0 lo: flags=73<UP,LOOPBACK,RUNNING> mtu 65536 inet 127.0.0.1 netmask 255.0.0.0 inet6 ::1 prefixlen 128 scopeid 0x10<host> loop txqueuelen 1000 (Local Loopback) RX packets 56 bytes 5496 (5.4 KB) RX errors 0 dropped 0 overruns 0 frame 0 TX packets 56 bytes 5496 (5.4 KB) TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0 wlx18d6c71b6e3e: flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 1500 inet 192.168.1.106 netmask 255.255.255.0 broadcast 192.168.1.255 inet6 fe80::21c7:2d90:e47d:ee48 prefixlen 64 scopeid 0x20<link> ether 18:d6:c7:1b:6e:3e txqueuelen 1000 (Ethernet) RX packets 37 bytes 5345 (5.3 KB) RX errors 0 dropped 7 overruns 0 frame 0 TX packets 77 bytes 10513 (10.5 KB) TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0 eric@eric-VirtualBox:~/src$ dmesg | tail -n 30 12:51:25.551584 main Log opened 2021-03-01T12:51:25.551572000Z [ 46.855763] 12:51:25.551995 main OS Product: Linux [ 46.855838] 12:51:25.552075 main OS Release: 5.4.0-66-generic [ 46.855897] 12:51:25.552150 main OS Version: #74-Ubuntu SMP Wed Jan 27 22:54:38 UTC 2021 [ 46.855971] 12:51:25.552207 main Executable: /opt/VBoxGuestAdditions-6.1.16/sbin/VBoxService 12:51:25.552208 main Process ID: 898 12:51:25.552209 main Package type: LINUX_64BITS_GENERIC [ 46.858699] 12:51:25.554921 main 6.1.16 r140961 started. Verbose level = 0 [ 46.863116] 12:51:25.559319 main vbglR3GuestCtrlDetectPeekGetCancelSupport: Supported (#1) [ 140.687550] usb 1-2: new high-speed USB device number 3 using xhci_hcd [ 140.838279] usb 1-2: New USB device found, idVendor=2357, idProduct=010b, bcdDevice= 1.00 [ 140.838281] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 140.838283] usb 1-2: Product: WiFi [ 140.838284] usb 1-2: Manufacturer: MediaTek [ 140.838285] usb 1-2: SerialNumber: 1.0 [ 178.374187] cfg80211: Loading compiled-in X.509 certificates for regulatory database [ 178.378370] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' [ 178.417507] usbcore: registered new interface driver mt76x0u [ 178.557165] usb 1-2: reset high-speed USB device number 3 using xhci_hcd [ 178.720436] mt76x0u 1-2:1.0: ASIC revision: 76100002 MAC revision: 76502000 [ 180.156077] mt76x0u 1-2:1.0: EEPROM ver:02 fae:04 [ 181.190558] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht' [ 181.225560] mt76x0u 1-2:1.0 wlx18d6c71b6e3e: renamed from wlan0 [ 188.660826] wlx18d6c71b6e3e: authenticate with d0:17:c2:e0:d7:9c [ 189.447781] wlx18d6c71b6e3e: send auth to d0:17:c2:e0:d7:9c (try 1/3) [ 189.618282] wlx18d6c71b6e3e: authenticated [ 189.619008] wlx18d6c71b6e3e: associate with d0:17:c2:e0:d7:9c (try 1/3) [ 189.715268] wlx18d6c71b6e3e: RX AssocResp from d0:17:c2:e0:d7:9c (capab=0x1011 status=0 aid=8) [ 189.734720] wlx18d6c71b6e3e: associated [ 190.233239] IPv6: ADDRCONF(NETDEV_CHANGE): wlx18d6c71b6e3e: link becomes ready Signed-off-by: Eric Y.Y. Wong <eric.wongyeungyan@gmail.com> Signed-off-by: Felix Fietkau <nbd@nbd.name> 2021-04-11T16:50:39Z Ryder Lee ryder.lee@mediatek.com 2021-02-02T13:57:59Z urn:sha1:7715a1d54bdf47f89194b0a088e07dcd76820f51 Use PCI standard defines. Signed-off-by: Ryder Lee <ryder.lee@mediatek.com> Acked-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name> 2021-01-26T19:07:48Z Lorenzo Bianconi lorenzo@kernel.org 2021-01-04T18:00:05Z urn:sha1:a782f8bfdd46a6028dee41b99a990534737ad997 Move mac_work delayed_work and mac_work_count in mt76_phy since it is used by all drivers. This is a preliminary patch to create a common mcu library used by mt7615 and mt7921 drivers Co-developed-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>