linux-dev/drivers/net/wireless/mediatek, branch master

wifi: mt76: fix rx checksum offload on mt7615/mt7915/mt7921

2022-10-11T08:41:20Z

Checking the relevant rxd bits for the checksum information only indicates if the checksum verification was performed by the hardware and doesn't show actual checksum errors. Checksum errors are indicated in the info field of the DMA descriptor. Fix packets erroneously marked as CHECKSUM_UNNECESSARY by checking the extra bits as well. Those bits are only passed to the driver for MMIO devices at the moment, so limit checksum offload to those. Fixes: 2122dfbfd0bd ("mt76: mt7615: add rx checksum offload support") Fixes: 94244d2ea503 ("mt76: mt7915: add rx checksum offload support") Fixes: 0e75732764e8 ("mt76: mt7921: enable rx csum offload") Signed-off-by: Felix Fietkau Signed-off-by: Kalle Valo Link: https://lore.kernel.org/r/20221005130824.23371-2-nbd@nbd.name

wifi: mt76: fix receiving LLC packets on mt7615/mt7915

2022-10-11T08:41:20Z

When 802.3 decap offload is enabled, the hardware indicates header translation failure, whenever either the LLC-SNAP header was not found, or a VLAN header with an unregcognized tag is present. In that case, the hardware inserts a 2-byte length fields after the MAC addresses. For VLAN packets, this tag needs to be removed. However, for 802.3 LLC packets, the length bytes should be preserved, since there is no separate ethertype field in the data. This fixes an issue where the length field was omitted for LLC frames, causing them to be malformed after hardware decap. Fixes: 1eeff0b4c1a6 ("mt76: mt7915: fix decap offload corner case with 4-addr VLAN frames") Reported-by: Chad Monroe Signed-off-by: Felix Fietkau Signed-off-by: Kalle Valo Link: https://lore.kernel.org/r/20221005130824.23371-1-nbd@nbd.name

wifi: mt76: fix rate reporting / throughput regression on mt7915 and newer

2022-10-06T05:19:04Z

mt7915 and newer need to report the rate_info that's stored in wcid->rate, since they don't fill info->status.rates. Cc: Jonas Jelonek Reported-by: Mikhail Gavrilov Link: https://lore.kernel.org/all/CABXGCsP0znm9pS-MiKtyxTXR7XiyFVqen0qzNpicGHDZKCzbwg@mail.gmail.com/ Fixes: 44fa75f207d8 ("mac80211: extend current rate control tx status API") Signed-off-by: Felix Fietkau Tested-by: Mikhail Gavrilov Signed-off-by: Kalle Valo Link: https://lore.kernel.org/r/20220927093823.6007-1-nbd@nbd.name

Merge tag 'wireless-next-2022-09-30' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next

2022-09-30T17:07:31Z

Kalle Valo says: ==================== wireless-next patches for v6.1 Few stack changes and lots of driver changes in this round. brcmfmac has more activity as usual and it gets new hardware support. ath11k improves WCN6750 support and also other smaller features. And of course changes all over. Note: in early September wireless tree was merged to wireless-next to avoid some conflicts with mac80211 patches, this shouldn't cause any problems but wanted to mention anyway. Major changes: mac80211 - refactoring and preparation for Wi-Fi 7 Multi-Link Operation (MLO) feature continues brcmfmac - support CYW43439 SDIO chipset - support BCM4378 on Apple platforms - support CYW89459 PCIe chipset rtw89 - more work to get rtw8852c supported - P2P support - support for enabling and disabling MSDU aggregation via nl80211 mt76 - tx status reporting improvements ath11k - cold boot calibration support on WCN6750 - Target Wake Time (TWT) debugfs support for STA interface - support to connect to a non-transmit MBSSID AP profile - enable remain-on-channel support on WCN6750 - implement SRAM dump debugfs interface - enable threaded NAPI on all hardware - WoW support for WCN6750 - support to provide transmit power from firmware via nl80211 - support to get power save duration for each client - spectral scan support for 160 MHz wcn36xx - add SNR from a received frame as a source of system entropy * tag 'wireless-next-2022-09-30' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next: (231 commits) wifi: rtl8xxxu: Improve rtl8xxxu_queue_select wifi: rtl8xxxu: Fix AIFS written to REG_EDCA_*_PARAM wifi: rtl8xxxu: gen2: Enable 40 MHz channel width wifi: rtw89: 8852b: configure DLE mem wifi: rtw89: check DLE FIFO size with reserved size wifi: rtw89: mac: correct register of report IMR wifi: rtw89: pci: set power cut closed for 8852be wifi: rtw89: pci: add to do PCI auto calibration wifi: rtw89: 8852b: implement chip_ops::{enable,disable}_bb_rf wifi: rtw89: add DMA busy checking bits to chip info wifi: rtw89: mac: define DMA channel mask to avoid unsupported channels wifi: rtw89: pci: mask out unsupported TX channels iwlegacy: Replace zero-length arrays with DECLARE_FLEX_ARRAY() helper ipw2x00: Replace zero-length array with DECLARE_FLEX_ARRAY() helper wifi: iwlwifi: Track scan_cmd allocation size explicitly brcmfmac: Remove the call to "dtim_assoc" IOVAR brcmfmac: increase dcmd maximum buffer size brcmfmac: Support 89459 pcie brcmfmac: increase default max WOWL patterns to 16 cw1200: fix incorrect check to determine if no element is found in list ... ==================== Link: https://lore.kernel.org/r/20220930150413.A7984C433D6@smtp.kernel.org Signed-off-by: Jakub Kicinski

net: drop the weight argument from netif_napi_add

2022-09-29T01:57:14Z

We tell driver developers to always pass NAPI_POLL_WEIGHT as the weight to netif_napi_add(). This may be confusing to newcomers, drop the weight argument, those who really need to tweak the weight can use netif_napi_add_weight(). Acked-by: Marc Kleine-Budde # for CAN Link: https://lore.kernel.org/r/20220927132753.750069-1-kuba@kernel.org Signed-off-by: Jakub Kicinski

wifi: mt76: mt7921s: Switch to DEFINE_SIMPLE_DEV_PM_OPS() and pm_sleep_ptr()

2022-09-15T11:21:39Z

Use the new DEFINE_SIMPLE_DEV_PM_OPS() and pm_sleep_ptr() macros to handle the .suspend/.resume callbacks. The new macros allow suspend and resume functions to be automatically dropped without any #ifdef guards. Tested-by: YN Chen Signed-off-by: Deren Wu Signed-off-by: Felix Fietkau

wifi: mt76: mt7663s: Switch to DEFINE_SIMPLE_DEV_PM_OPS() and pm_sleep_ptr()

2022-09-15T11:21:39Z

Use the new DEFINE_SIMPLE_DEV_PM_OPS() and pm_sleep_ptr() macros to handle the .suspend/.resume callbacks. The new macros allow suspend and resume functions to be automatically dropped without any #ifdef guards. Signed-off-by: Deren Wu Signed-off-by: Felix Fietkau

wifi: mt76: mt7921e: fix random fw download fail

2022-09-15T11:21:39Z

In case of PCIe interoperability problem shows up, the firmware payload may be corrupted in download stage. Turn off L0s to keep fw download process accurately. [ 1093.528363] mt7921e 0000:3b:00.0: Message 00000007 (seq 7) timeout [ 1093.528414] mt7921e 0000:3b:00.0: Failed to start patch [ 1096.600156] mt7921e 0000:3b:00.0: Message 00000010 (seq 8) timeout [ 1096.600207] mt7921e 0000:3b:00.0: Failed to release patch semaphore [ 1097.699031] mt7921e 0000:3b:00.0: Timeout for driver own [ 1098.758427] mt7921e 0000:3b:00.0: Timeout for driver own [ 1099.834408] mt7921e 0000:3b:00.0: Timeout for driver own [ 1100.915264] mt7921e 0000:3b:00.0: Timeout for driver own [ 1101.990625] mt7921e 0000:3b:00.0: Timeout for driver own [ 1103.077587] mt7921e 0000:3b:00.0: Timeout for driver own [ 1104.173258] mt7921e 0000:3b:00.0: Timeout for driver own [ 1105.248466] mt7921e 0000:3b:00.0: Timeout for driver own [ 1106.336969] mt7921e 0000:3b:00.0: Timeout for driver own [ 1106.397542] mt7921e 0000:3b:00.0: hardware init failed Cc: stable@vger.kernel.org Fixes: bf3747ae2e25 ("mt76: mt7921: enable aspm by default") Signed-off-by: Deren Wu Tested-by: AngeloGioacchino Del Regno Signed-off-by: Felix Fietkau

wifi: mt76: mt7921: introduce Country Location Control support

2022-09-15T11:21:39Z

Country Location Control (CLC) is an additional control for country rules in firmware. We introduce this new feature to make sure mt7921 series working properly in all region. The addtional policies would be put into firmware based on differnt regions. mt76 driver should be in charge of submitting per region policy. Reviewed-by: Sean Wang Tested-by: YN Chen Co-developed-by: Deren Wu Signed-off-by: Deren Wu Signed-off-by: Ming Yen Hsieh Signed-off-by: Felix Fietkau

wifi: mt76: mt7921e: fix rmmod crash in driver reload test

2022-09-15T11:21:39Z

In insmod/rmmod stress test, the following crash dump shows up immediately. The problem is caused by missing mt76_dev in mt7921_pci_remove(). We should make sure the drvdata is ready before probe() finished. [168.862789] ================================================================== [168.862797] BUG: KASAN: user-memory-access in try_to_grab_pending+0x59/0x480 [168.862805] Write of size 8 at addr 0000000000006df0 by task rmmod/5361 [168.862812] CPU: 7 PID: 5361 Comm: rmmod Tainted: G OE 5.19.0-rc6 #1 [168.862816] Hardware name: Intel(R) Client Systems NUC8i7BEH/NUC8BEB, 05/04/2020 [168.862820] Call Trace: [168.862822] [168.862825] dump_stack_lvl+0x49/0x63 [168.862832] print_report.cold+0x493/0x6b7 [168.862845] kasan_report+0xa7/0x120 [168.862857] kasan_check_range+0x163/0x200 [168.862861] __kasan_check_write+0x14/0x20 [168.862866] try_to_grab_pending+0x59/0x480 [168.862870] __cancel_work_timer+0xbb/0x340 [168.862898] cancel_work_sync+0x10/0x20 [168.862902] mt7921_pci_remove+0x61/0x1c0 [mt7921e] [168.862909] pci_device_remove+0xa3/0x1d0 [168.862914] device_remove+0xc4/0x170 [168.862920] device_release_driver_internal+0x163/0x300 [168.862925] driver_detach+0xc7/0x1a0 [168.862930] bus_remove_driver+0xeb/0x2d0 [168.862935] driver_unregister+0x71/0xb0 [168.862939] pci_unregister_driver+0x30/0x230 [168.862944] mt7921_pci_driver_exit+0x10/0x1b [mt7921e] [168.862949] __x64_sys_delete_module+0x2f9/0x4b0 [168.862968] do_syscall_64+0x38/0x90 [168.862973] entry_SYSCALL_64_after_hwframe+0x63/0xcd Test steps: 1. insmode 2. do not ifup 3. rmmod quickly (within 1 second) Fixes: 1c71e03afe4b ("mt76: mt7921: move mt7921_init_hw in a dedicated work") Signed-off-by: Deren Wu Signed-off-by: Felix Fietkau