linux-dev/drivers/net/wireless/realtek/rtw88, branch master

Merge tag 'wireless-next-2022-09-30' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next

2022-09-30T17:07:31Z

Kalle Valo says: ==================== wireless-next patches for v6.1 Few stack changes and lots of driver changes in this round. brcmfmac has more activity as usual and it gets new hardware support. ath11k improves WCN6750 support and also other smaller features. And of course changes all over. Note: in early September wireless tree was merged to wireless-next to avoid some conflicts with mac80211 patches, this shouldn't cause any problems but wanted to mention anyway. Major changes: mac80211 - refactoring and preparation for Wi-Fi 7 Multi-Link Operation (MLO) feature continues brcmfmac - support CYW43439 SDIO chipset - support BCM4378 on Apple platforms - support CYW89459 PCIe chipset rtw89 - more work to get rtw8852c supported - P2P support - support for enabling and disabling MSDU aggregation via nl80211 mt76 - tx status reporting improvements ath11k - cold boot calibration support on WCN6750 - Target Wake Time (TWT) debugfs support for STA interface - support to connect to a non-transmit MBSSID AP profile - enable remain-on-channel support on WCN6750 - implement SRAM dump debugfs interface - enable threaded NAPI on all hardware - WoW support for WCN6750 - support to provide transmit power from firmware via nl80211 - support to get power save duration for each client - spectral scan support for 160 MHz wcn36xx - add SNR from a received frame as a source of system entropy * tag 'wireless-next-2022-09-30' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next: (231 commits) wifi: rtl8xxxu: Improve rtl8xxxu_queue_select wifi: rtl8xxxu: Fix AIFS written to REG_EDCA_*_PARAM wifi: rtl8xxxu: gen2: Enable 40 MHz channel width wifi: rtw89: 8852b: configure DLE mem wifi: rtw89: check DLE FIFO size with reserved size wifi: rtw89: mac: correct register of report IMR wifi: rtw89: pci: set power cut closed for 8852be wifi: rtw89: pci: add to do PCI auto calibration wifi: rtw89: 8852b: implement chip_ops::{enable,disable}_bb_rf wifi: rtw89: add DMA busy checking bits to chip info wifi: rtw89: mac: define DMA channel mask to avoid unsupported channels wifi: rtw89: pci: mask out unsupported TX channels iwlegacy: Replace zero-length arrays with DECLARE_FLEX_ARRAY() helper ipw2x00: Replace zero-length array with DECLARE_FLEX_ARRAY() helper wifi: iwlwifi: Track scan_cmd allocation size explicitly brcmfmac: Remove the call to "dtim_assoc" IOVAR brcmfmac: increase dcmd maximum buffer size brcmfmac: Support 89459 pcie brcmfmac: increase default max WOWL patterns to 16 cw1200: fix incorrect check to determine if no element is found in list ... ==================== Link: https://lore.kernel.org/r/20220930150413.A7984C433D6@smtp.kernel.org Signed-off-by: Jakub Kicinski

net: drop the weight argument from netif_napi_add

2022-09-29T01:57:14Z

We tell driver developers to always pass NAPI_POLL_WEIGHT as the weight to netif_napi_add(). This may be confusing to newcomers, drop the weight argument, those who really need to tweak the weight can use netif_napi_add_weight(). Acked-by: Marc Kleine-Budde # for CAN Link: https://lore.kernel.org/r/20220927132753.750069-1-kuba@kernel.org Signed-off-by: Jakub Kicinski

wifi: mac80211: keep A-MSDU data in sta and per-link

2022-09-06T08:17:08Z

The A-MSDU data needs to be stored per-link and aggregated into a single value for the station. Add a new struct ieee_80211_sta_aggregates in order to store this data and a new function ieee80211_sta_recalc_aggregates to update the current data for the STA. Note that in the non MLO case the pointer in ieee80211_sta will directly reference the data in deflink.agg, which means that recalculation may be skipped in that case. Signed-off-by: Benjamin Berg Signed-off-by: Johannes Berg

wifi: mac80211: extend ieee80211_nullfunc_get() for MLO

2022-09-06T08:14:24Z

Add a link_id parameter to ieee80211_nullfunc_get() to be able to obtain a correctly addressed frame. Signed-off-by: Johannes Berg

wifi: rtw88: add missing destroy_workqueue() on error path in rtw_core_init()

2022-09-02T08:45:30Z

Add the missing destroy_workqueue() before return from rtw_core_init() in error path. Fixes: fe101716c7c9 ("rtw88: replace tx tasklet with work queue") Signed-off-by: Yang Yingliang Reviewed-by: Ping-Ke Shih Signed-off-by: Kalle Valo Link: https://lore.kernel.org/r/20220826023817.3908255-1-yangyingliang@huawei.com

wifi: rtw88: fix uninitialized use of primary channel index

2022-08-26T10:16:19Z

clang reports uninitialized use: >> drivers/net/wireless/realtek/rtw88/main.c:731:2: warning: variable 'primary_channel_idx' is used uninitialized whenever switch default is taken [-Wsometimes-uninitialized] default: ^~~~~~~ drivers/net/wireless/realtek/rtw88/main.c:754:39: note: uninitialized use occurs here hal->current_primary_channel_index = primary_channel_idx; ^~~~~~~~~~~~~~~~~~~ drivers/net/wireless/realtek/rtw88/main.c:687:24: note: initialize the variable 'primary_channel_idx' to silence this warning u8 primary_channel_idx; ^ = '\0' This situation could not happen, because possible channel bandwidth 20/40/80MHz are enumerated. Fixes: 341dd1f7de4c ("wifi: rtw88: add the update channel flow to support setting by parameters") Reported-by: kernel test robot Signed-off-by: Ping-Ke Shih Reviewed-by: Nathan Chancellor Link: https://lore.kernel.org/r/20220815062004.22920-1-pkshih@realtek.com Signed-off-by: Johannes Berg

wifi: rtw88: prohibit enter IPS during HW scan

2022-08-10T05:48:47Z

Mac80211 core may ask driver to change to idle mode during HW scan, then H2C command for HW scan will send failed since chip is in idle mode. Therefore, We check the SCANNING flag before entering IPS to prevent this behavior. Signed-off-by: Chih-Kang Chang Signed-off-by: Ping-Ke Shih Signed-off-by: Kalle Valo Link: https://lore.kernel.org/r/20220809084107.38137-8-pkshih@realtek.com

wifi: rtw88: add flag check before enter or leave IPS

2022-08-10T05:48:46Z

Enter or leave IPS controlled by mac80211 before driver support HW scan. After support HW scan, driver need to control IPS before start HW scan and scan complete, but mac80211 also ask driver enter or leave IPS. Therefore, we add flag check in IPS to prevent entering or leaving IPS twice. Signed-off-by: Chih-Kang Chang Signed-off-by: Ping-Ke Shih Signed-off-by: Kalle Valo Link: https://lore.kernel.org/r/20220809084107.38137-7-pkshih@realtek.com

wifi: rtw88: add flushing queue before HW scan

2022-08-10T05:48:46Z

We need to flush queue before HW scan to avoid packets dropped by hardware. Signed-off-by: Chih-Kang Chang Signed-off-by: Ping-Ke Shih Signed-off-by: Kalle Valo Link: https://lore.kernel.org/r/20220809084107.38137-6-pkshih@realtek.com

wifi: rtw88: fix WARNING:rtw_get_tx_power_params() during HW scan

2022-08-10T05:48:46Z

During HW scan, the channel related feilds in hal struct changed partially. If setting Tx power will get WARNING:rtw_get_tx_power_params() due to some of fields in hal struct mismatch. Therefore, we fix to change all required fields in hal struct when channel switch during HW scan. Signed-off-by: Chih-Kang Chang Signed-off-by: Ping-Ke Shih Signed-off-by: Kalle Valo Link: https://lore.kernel.org/r/20220809084107.38137-5-pkshih@realtek.com