linux-dev/drivers/net/wireless/rtlwifi/rtl8192cu, branch master

rtlwifi: rtl818x: Move drivers into new realtek directory

2015-10-14T10:33:10Z

Now that a new mac80211-based driver for Realtek devices has been submitted, it is time to reorganize the directories. Rather than having directories rtlwifi and rtl818x be in drivers/net/wireless/, they will now be in drivers/net/wireless/realtek/. This change simplifies the directory structure, but does not result in any configuration changes that are visable to the user. Signed-off-by: Larry Finger Signed-off-by: Kalle Valo

rtlwifi: rtl8192cu: Add new device ID

2015-08-25T12:25:19Z

The v2 of NetGear WNA1000M uses a different idProduct: USB ID 0846:9043 Signed-off-by: Adrien Schildknecht Cc: Stable Acked-by: Larry Finger Signed-off-by: Kalle Valo

rtlwifi: rtl8192cu: Remove and replace routine in hw.c and mac.c

2015-08-18T05:57:37Z

I remove duplicated routines which related rtl92cu_set_hw_reg(). 1. rtl92c_set_qos() and HW_VAR_AC_PARAM routine are similar code. so i replace code with rtlpriv->cfg->ops->set_hw_reg(). 2. rtl92c_set_mac_addr() and 'HW_VAR_ETHER_ADDR' case at rtl92cu_set_hw_reg() routine are similar code. so i removed rtl92c_set_mac_addr() function. also it was not used anywhere. 3. remove HW_VAR_ACM_CTRL routine in rtl92cu_set_hw_reg(). if rtl_usb->acm_method is not EACMWAY2_SW, HW_VAR_ACM_CTRL is called from HW_VAR_AC_PARAM. but it never called. because acm_method is always EACMWAY2_SW. so i remove acm_method check routine and HW_VAR_ACM_CTRL routine. both usb and pci interface is not used HW_VAR_ACM_CTRL. but i can't test pci interface module, so i didn't modify pci code. Signed-off-by: Taehee Yoo Signed-off-by: Kalle Valo

rtlwifi: rtl8192cu: remove duplicated routine in hw.c and mac.c

2015-08-18T05:56:34Z

rtl92c_set_xxx_filter is same routine with rtl92cu_set_hw_reg. so i remove those functions that are rtl92c_set_xxx_filter. (rtl92c_get_xxx_filter is also same reason.) also i add code updating struct rtl_mac member variable in the rtl92cu_set_hw_reg. after that, no more _update_mac_setting is not useful. thus i remove that. Signed-off-by: Taehee Yoo Signed-off-by: Kalle Valo

rtlwifi: rtl8192cu: Remove rtl8723 code

2015-07-21T13:23:50Z

In the rtlwifi/rtl8192cu, rtl8723 code is dead code. So I remove it. Signed-off-by: Taehee Yoo Acked-by: Larry Finger Signed-off-by: Kalle Valo

rtlwifi: rtl8192cu: Fix variable isfirst_ampdu

2015-06-15T09:31:42Z

rtl92cu_rx_query_desc set a isampdu twice. but second code is related to isfirst_ampdu. so i change it. Signed-off-by: Taehee Yoo Signed-off-by: Kalle Valo

rtlwifi: rtl8192cu: debug message change "RTL8192CE" to "RTL8192CU"

2015-06-15T09:31:41Z

In the rtlwifi/rtl8192cu, I change debug message "RTL8192CE" to "RTL8192CU". Signed-off-by: Taehee Yoo Signed-off-by: Kalle Valo

rtlwifi: rtl8192cu: remove duplicated routine in _rtl92c_phy_rf6052_config_parafile

2015-06-15T09:31:39Z

in the _rtl92c_phy_rf6052_config_parafile(), cases RF90_PATH_A and RF90_PATH_B call the same routine. so i remove one of these routine. also the return routine is duplicated. so i remove it. Signed-off-by: Taehee Yoo Signed-off-by: Kalle Valo

rtlwifi: rtl8192cu: remove INTF_PCI and INTF_USB

2015-06-15T09:29:18Z

in the rtlwifi/rtl8192cu, INTF_PCI and INTF_USB is unnecessary. because RTL8192CU chipset is only USB interface. Signed-off-by: Taehee Yoo Signed-off-by: Kalle Valo

rtlwifi: rtl8192cu: remove _InitBeaconParameters().

2015-06-15T09:29:17Z

_InitBeaconParameters() and rtl92cu_init_beacon_parameters() is same routine. I remove both functions. then i add _rtl92cu_init_beacon_parameters() in the hw.c. _rtl92cu_init_beacon_parameters() is same routine with _InitBeaconParameters(). Signed-off-by: Taehee Yoo Signed-off-by: Kalle Valo