linux-dev/drivers/net, branch linus/master

virtio_net: fix xdp_rxq_info bug after suspend/resume

2022-06-23T02:09:13Z

The following sequence currently causes a driver bug warning when using virtio_net: # ip link set eth0 up # echo mem > /sys/power/state (or e.g. # rtcwake -s 10 -m mem) # ip link set eth0 down Missing register, driver bug WARNING: CPU: 0 PID: 375 at net/core/xdp.c:138 xdp_rxq_info_unreg+0x58/0x60 Call trace: xdp_rxq_info_unreg+0x58/0x60 virtnet_close+0x58/0xac __dev_close_many+0xac/0x140 __dev_change_flags+0xd8/0x210 dev_change_flags+0x24/0x64 do_setlink+0x230/0xdd0 ... This happens because virtnet_freeze() frees the receive_queue completely (including struct xdp_rxq_info) but does not call xdp_rxq_info_unreg(). Similarly, virtnet_restore() sets up the receive_queue again but does not call xdp_rxq_info_reg(). Actually, parts of virtnet_freeze_down() and virtnet_restore_up() are almost identical to virtnet_close() and virtnet_open(): only the calls to xdp_rxq_info_(un)reg() are missing. This means that we can fix this easily and avoid such problems in the future by just calling virtnet_close()/open() from the freeze/restore handlers. Aside from adding the missing xdp_rxq_info calls the only difference is that the refill work is only cancelled if netif_running(). However, this should not make any functional difference since the refill work should only be active if the network interface is actually up. Fixes: 754b8a21a96d ("virtio_net: setup xdp_rxq_info") Signed-off-by: Stephan Gerhold Acked-by: Jesper Dangaard Brouer Acked-by: Jason Wang Link: https://lore.kernel.org/r/20220621114845.3650258-1-stephan.gerhold@kernkonzept.com Signed-off-by: Jakub Kicinski

Merge branch '100GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue

2022-06-23T01:59:29Z

Tony Nguyen says: ==================== Intel Wired LAN Driver Updates 2022-06-21 This series contains updates to ice driver only. Marcin fixes GTP filters by allowing ignoring of the inner ethertype field. Wojciech adds VSI handle tracking in order to properly distinguish similar filters for removal. Anatolii removes ability to set 1000baseT and 1000baseX fields concurrently which caused link issues. He also disallows setting channels to less than the number of Traffic Classes which would cause NULL pointer dereference. * '100GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue: ice: ethtool: Prohibit improper channel config for DCB ice: ethtool: advertise 1000M speeds properly ice: Fix switchdev rules book keeping ice: ignore protocol field in GTP offload ==================== Link: https://lore.kernel.org/r/20220621224756.631765-1-anthony.l.nguyen@intel.com Signed-off-by: Jakub Kicinski

igb: Make DMA faster when CPU is active on the PCIe link

2022-06-23T01:46:24Z

Intel I210 on some Intel Alder Lake platforms can only achieve ~750Mbps Tx speed via iperf. The RR2DCDELAY shows around 0x2xxx DMA delay, which will be significantly lower when 1) ASPM is disabled or 2) SoC package c-state stays above PC3. When the RR2DCDELAY is around 0x1xxx the Tx speed can reach to ~950Mbps. According to the I210 datasheet "8.26.1 PCIe Misc. Register - PCIEMISC", "DMA Idle Indication" doesn't seem to tie to DMA coalesce anymore, so set it to 1b for "DMA is considered idle when there is no Rx or Tx AND when there are no TLPs indicating that CPU is active detected on the PCIe link (such as the host executes CSR or Configuration register read or write operation)" and performing Tx should also fall under "active CPU on PCIe link" case. In addition to that, commit b6e0c419f040 ("igb: Move DMA Coalescing init code to separate function.") seems to wrongly changed from enabling E1000_PCIEMISC_LX_DECISION to disabling it, also fix that. Fixes: b6e0c419f040 ("igb: Move DMA Coalescing init code to separate function.") Signed-off-by: Kai-Heng Feng Tested-by: Gurucharan (A Contingent worker at Intel) Signed-off-by: Tony Nguyen Link: https://lore.kernel.org/r/20220621221056.604304-1-anthony.l.nguyen@intel.com Signed-off-by: Jakub Kicinski

net: dsa: qca8k: reduce mgmt ethernet timeout

2022-06-23T01:33:51Z

The current mgmt ethernet timeout is set to 100ms. This value is too big and would slow down any mdio command in case the mgmt ethernet packet have some problems on the receiving part. Reduce it to just 5ms to handle case when some operation are done on the master port that would cause the mgmt ethernet to not work temporarily. Fixes: 5950c7c0a68c ("net: dsa: qca8k: add support for mgmt read/write in Ethernet packet") Signed-off-by: Christian Marangi Link: https://lore.kernel.org/r/20220621151633.11741-1-ansuelsmth@gmail.com Signed-off-by: Jakub Kicinski

net: dsa: qca8k: reset cpu port on MTU change

2022-06-23T01:32:58Z

It was discovered that the Documentation lacks of a fundamental detail on how to correctly change the MAX_FRAME_SIZE of the switch. In fact if the MAX_FRAME_SIZE is changed while the cpu port is on, the switch panics and cease to send any packet. This cause the mgmt ethernet system to not receive any packet (the slow fallback still works) and makes the device not reachable. To recover from this a switch reset is required. To correctly handle this, turn off the cpu ports before changing the MAX_FRAME_SIZE and turn on again after the value is applied. Fixes: f58d2598cf70 ("net: dsa: qca8k: implement the port MTU callbacks") Cc: stable@vger.kernel.org Signed-off-by: Christian Marangi Link: https://lore.kernel.org/r/20220621151122.10220-1-ansuelsmth@gmail.com Signed-off-by: Jakub Kicinski

hinic: Replace memcpy() with direct assignment

2022-06-22T18:04:32Z

Under CONFIG_FORTIFY_SOURCE=y and CONFIG_UBSAN_BOUNDS=y, Clang is bugged here for calculating the size of the destination buffer (0x10 instead of 0x14). This copy is a fixed size (sizeof(struct fw_section_info_st)), with the source and dest being struct fw_section_info_st, so the memcpy should be safe, assuming the index is within bounds, which is UBSAN_BOUNDS's responsibility to figure out. Avoid the whole thing and just do a direct assignment. This results in no change to the executable code. [This is a duplicate of commit 2c0ab32b73cf ("hinic: Replace memcpy() with direct assignment") which was applied to net-next.] Cc: Nick Desaulniers Cc: Tom Rix Cc: llvm@lists.linux.dev Link: https://github.com/ClangBuiltLinux/linux/issues/1592 Signed-off-by: Kees Cook Reviewed-by: Gustavo A. R. Silva Tested-by: Nathan Chancellor # build Link: https://lore.kernel.org/r/20220616052312.292861-1-keescook@chromium.org Signed-off-by: Jakub Kicinski

Revert "drivers/net/ethernet/neterion/vxge: Fix a use-after-free bug in vxge-main.c"

2022-06-22T12:15:49Z

This reverts commit 8fc74d18639a2402ca52b177e990428e26ea881f. BAR0 is the main (only?) register bank for this device. We most obviously can't unmap it before the netdev is unregistered. This was pointed out in review but the patch got reposted and merged, anyway. The author of the patch was only testing it with a QEMU model, which I presume does not emulate enough for the netdev to be brought up (author's replies are not visible in lore because they kept sending their emails in HTML). Link: https://lore.kernel.org/all/20220616085059.680dc215@kernel.org/ Fixes: 8fc74d18639a ("drivers/net/ethernet/neterion/vxge: Fix a use-after-free bug in vxge-main.c") Signed-off-by: Jakub Kicinski Signed-off-by: David S. Miller

net: phy: smsc: Disable Energy Detect Power-Down in interrupt mode

2022-06-22T04:59:47Z

Simon reports that if two LAN9514 USB adapters are directly connected without an intermediate switch, the link fails to come up and link LEDs remain dark. The issue was introduced by commit 1ce8b37241ed ("usbnet: smsc95xx: Forward PHY interrupts to PHY driver to avoid polling"). The PHY suffers from a known erratum wherein link detection becomes unreliable if Energy Detect Power-Down is used. In poll mode, the driver works around the erratum by briefly disabling EDPD for 640 msec to detect a neighbor, then re-enabling it to save power. In interrupt mode, no interrupt is signaled if EDPD is used by both link partners, so it must not be enabled at all. We'll recoup the power savings by enabling SUSPEND1 mode on affected LAN95xx chips in a forthcoming commit. Fixes: 1ce8b37241ed ("usbnet: smsc95xx: Forward PHY interrupts to PHY driver to avoid polling") Reported-by: Simon Han Signed-off-by: Lukas Wunner Link: https://lore.kernel.org/r/439a3f3168c2f9d44b5fd9bb8d2b551711316be6.1655714438.git.lukas@wunner.de Signed-off-by: Jakub Kicinski

ice: ethtool: Prohibit improper channel config for DCB

2022-06-21T22:20:24Z

Do not allow setting less channels, than Traffic Classes there are via ethtool. There must be at least one channel per Traffic Class. If you set less channels, than Traffic Classes there are, then during ice_vsi_rebuild there would be allocated only the requested amount of tx/rx rings in ice_vsi_alloc_arrays. But later in ice_vsi_setup_q_map there would be requested at least one channel per Traffic Class. This results in setting num_rxq > alloc_rxq and num_txq > alloc_txq. Later, there would be a NULL pointer dereference in ice_vsi_map_rings_to_vectors, because we go beyond of rx_rings or tx_rings arrays. Change ice_set_channels() to return error if you try to allocate less channels, than Traffic Classes there are. Change ice_vsi_setup_q_map() and ice_vsi_setup_q_map_mqprio() to return status code instead of void. Add error handling for ice_vsi_setup_q_map() and ice_vsi_setup_q_map_mqprio() in ice_vsi_init() and ice_vsi_cfg_tc(). [53753.889983] INFO: Flow control is disabled for this traffic class (0) on this vsi. [53763.984862] BUG: unable to handle kernel NULL pointer dereference at 0000000000000028 [53763.992915] PGD 14b45f5067 P4D 0 [53763.996444] Oops: 0002 [#1] SMP NOPTI [53764.000312] CPU: 12 PID: 30661 Comm: ethtool Kdump: loaded Tainted: GOE --------- - - 4.18.0-240.el8.x86_64 #1 [53764.011825] Hardware name: Intel Corporation WilsonCity/WilsonCity, BIOS WLYDCRB1.SYS.0020.P21.2012150710 12/15/2020 [53764.022584] RIP: 0010:ice_vsi_map_rings_to_vectors+0x7e/0x120 [ice] [53764.029089] Code: 41 0d 0f b7 b7 12 05 00 00 0f b6 d0 44 29 de 44 0f b7 c6 44 01 c2 41 39 d0 7d 2d 4c 8b 47 28 44 0f b7 ce 83 c6 01 4f 8b 04 c8 <49> 89 48 28 4 c 8b 89 b8 01 00 00 4d 89 08 4c 89 81 b8 01 00 00 44 [53764.048379] RSP: 0018:ff550dd88ea47b20 EFLAGS: 00010206 [53764.053884] RAX: 0000000000000002 RBX: 0000000000000004 RCX: ff385ea42fa4a018 [53764.061301] RDX: 0000000000000006 RSI: 0000000000000005 RDI: ff385e9baeedd018 [53764.068717] RBP: 0000000000000010 R08: 0000000000000000 R09: 0000000000000004 [53764.076133] R10: 0000000000000002 R11: 0000000000000004 R12: 0000000000000000 [53764.083553] R13: 0000000000000000 R14: ff385e658fdd9000 R15: ff385e9baeedd018 [53764.090976] FS: 000014872c5b5740(0000) GS:ff385e847f100000(0000) knlGS:0000000000000000 [53764.099362] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [53764.105409] CR2: 0000000000000028 CR3: 0000000a820fa002 CR4: 0000000000761ee0 [53764.112851] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [53764.120301] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [53764.127747] PKRU: 55555554 [53764.130781] Call Trace: [53764.133564] ice_vsi_rebuild+0x611/0x870 [ice] [53764.138341] ice_vsi_recfg_qs+0x94/0x100 [ice] [53764.143116] ice_set_channels+0x1a8/0x3e0 [ice] [53764.147975] ethtool_set_channels+0x14e/0x240 [53764.152667] dev_ethtool+0xd74/0x2a10 [53764.156665] ? __mod_lruvec_state+0x44/0x110 [53764.161280] ? __mod_lruvec_state+0x44/0x110 [53764.165893] ? page_add_file_rmap+0x15/0x170 [53764.170518] ? inet_ioctl+0xd1/0x220 [53764.174445] ? netdev_run_todo+0x5e/0x290 [53764.178808] dev_ioctl+0xb5/0x550 [53764.182485] sock_do_ioctl+0xa0/0x140 [53764.186512] sock_ioctl+0x1a8/0x300 [53764.190367] ? selinux_file_ioctl+0x161/0x200 [53764.195090] do_vfs_ioctl+0xa4/0x640 [53764.199035] ksys_ioctl+0x60/0x90 [53764.202722] __x64_sys_ioctl+0x16/0x20 [53764.206845] do_syscall_64+0x5b/0x1a0 [53764.210887] entry_SYSCALL_64_after_hwframe+0x65/0xca Fixes: 87324e747fde ("ice: Implement ethtool ops for channels") Signed-off-by: Anatolii Gerasymenko Tested-by: Gurucharan (A Contingent worker at Intel) Signed-off-by: Tony Nguyen

ice: ethtool: advertise 1000M speeds properly

2022-06-21T20:48:57Z

In current implementation ice_update_phy_type enables all link modes for selected speed. This approach doesn't work for 1000M speeds, because both copper (1000baseT) and optical (1000baseX) standards cannot be enabled at once. Fix this, by adding the function `ice_set_phy_type_from_speed()` for 1000M speeds. Fixes: 48cb27f2fd18 ("ice: Implement handlers for ethtool PHY/link operations") Signed-off-by: Anatolii Gerasymenko Tested-by: Gurucharan (A Contingent worker at Intel) Signed-off-by: Tony Nguyen