linux-dev/drivers/nfc/nxp-nci, branch linus/master

nfc: constify nci_ops

2021-07-25T08:21:20Z

The struct nci_ops is modified by NFC core in only one case: nci_allocate_device() receives too many proprietary commands (prop_ops) to configure. This is a build time known constrain, so a graceful handling of such case is not necessary. Instead, fail the nci_allocate_device() and add BUILD_BUG_ON() to places which set these. This allows to constify the struct nci_ops (consisting of function pointers) for correctness and safety. Signed-off-by: Krzysztof Kozlowski Signed-off-by: David S. Miller

NFC: nxp-nci: remove unnecessary label

2021-06-18T19:57:30Z

Remove unnecessary label chunk_exit and return directly. Signed-off-by: wengjianfeng Signed-off-by: David S. Miller

NFC: nxp-nci: remove unnecessary labels

2021-06-18T19:08:39Z

Simplify the code by removing unnecessary labels and returning directly. Signed-off-by: wengjianfeng Signed-off-by: David S. Miller

NFC: nxp-nci: Make firmware GPIO pin optional

2020-12-02T19:58:19Z

There are other NXP NCI compatible NFC controllers such as the PN7150 that use an integrated firmware and therefore do not have a GPIO to select firmware downloading mode. To support this kind of controller, let's make the firmware GPIO optional. Signed-off-by: Frieder Schrempf Reviewed-by: Andy Shevchenko Link: https://lore.kernel.org/r/20201201113921.6572-1-frieder.schrempf@kontron.de Signed-off-by: Jakub Kicinski

treewide: replace '---help---' in Kconfig files with 'help'

2020-06-13T16:57:21Z

Since commit 84af7a6194e4 ("checkpatch: kconfig: prefer 'help' over '---help---'"), the number of '---help---' has been gradually decreasing, but there are still more than 2400 instances. This commit finishes the conversion. While I touched the lines, I also fixed the indentation. There are a variety of indentation styles found. a) 4 spaces + '---help---' b) 7 spaces + '---help---' c) 8 spaces + '---help---' d) 1 space + 1 tab + '---help---' e) 1 tab + '---help---' (correct indentation) f) 1 tab + 1 space + '---help---' g) 1 tab + 2 spaces + '---help---' In order to convert all of them to 1 tab + 'help', I ran the following commend: $ find . -name 'Kconfig*' | xargs sed -i 's/^[[:space:]]*---help---/\thelp/' Signed-off-by: Masahiro Yamada

NFC: nxp-nci: Fix probing without ACPI

2019-12-10T04:15:17Z

devm_acpi_dev_add_driver_gpios() returns -ENXIO if CONFIG_ACPI is disabled (e.g. on device tree platforms). In this case, nxp-nci will silently fail to probe. The other NFC drivers only log a debug message if devm_acpi_dev_add_driver_gpios() fails. Do the same in nxp-nci to fix this problem. Fixes: ad0acfd69add ("NFC: nxp-nci: Get rid of code duplication in ->probe()") Cc: Andy Shevchenko Signed-off-by: Stephan Gerhold Acked-by: Andy Shevchenko Signed-off-by: David S. Miller

NFC: nxp-nci: Fix NULL pointer dereference after I2C communication error

2019-11-12T05:40:55Z

I2C communication errors (-EREMOTEIO) during the IRQ handler of nxp-nci result in a NULL pointer dereference at the moment: BUG: kernel NULL pointer dereference, address: 0000000000000000 Oops: 0002 [#1] PREEMPT SMP NOPTI CPU: 1 PID: 355 Comm: irq/137-nxp-nci Not tainted 5.4.0-rc6 #1 RIP: 0010:skb_queue_tail+0x25/0x50 Call Trace: nci_recv_frame+0x36/0x90 [nci] nxp_nci_i2c_irq_thread_fn+0xd1/0x285 [nxp_nci_i2c] ? preempt_count_add+0x68/0xa0 ? irq_forced_thread_fn+0x80/0x80 irq_thread_fn+0x20/0x60 irq_thread+0xee/0x180 ? wake_threads_waitq+0x30/0x30 kthread+0xfb/0x130 ? irq_thread_check_affinity+0xd0/0xd0 ? kthread_park+0x90/0x90 ret_from_fork+0x1f/0x40 Afterward the kernel must be rebooted to work properly again. This happens because it attempts to call nci_recv_frame() with skb == NULL. However, unlike nxp_nci_fw_recv_frame(), nci_recv_frame() does not have any NULL checks for skb, causing the NULL pointer dereference. Change the code to call only nxp_nci_fw_recv_frame() in case of an error. Make sure to log it so it is obvious that a communication error occurred. The error above then becomes: nxp-nci_i2c i2c-NXP1001:00: NFC: Read failed with error -121 nci: __nci_request: wait_for_completion_interruptible_timeout failed 0 nxp-nci_i2c i2c-NXP1001:00: NFC: Read failed with error -121 Fixes: 6be88670fc59 ("NFC: nxp-nci_i2c: Add I2C support to NXP NCI driver") Signed-off-by: Stephan Gerhold Reviewed-by: Andy Shevchenko Signed-off-by: David S. Miller

NFC: nxp-nci: Fix recommendation for NFC_NXP_NCI_I2C Kconfig

2019-07-29T15:56:27Z

This is a simple cleanup to the Kconfig help text as discussed in [1]. [1] https://marc.info/?t=155774435600001&r=1&w=2 Suggested-by: Andy Shevchenko Suggested-by: Oleg Zhurakivskyy Signed-off-by: Sedat Dilek Signed-off-by: Andy Shevchenko Signed-off-by: David S. Miller

NFC: nxp-nci: Clarify on supported chips

2019-07-29T15:56:26Z

This patch clarifies on the supported NXP NCI chips and families and lists PN547 and PN548 separately which are known as NPC100 respectively NPC300. This helps to find informations and identify drivers on vendor's support websites. For details see the discussion in [1] and [2]. [1] https://marc.info/?t=155774435600001&r=1&w=2 [2] https://patchwork.kernel.org/project/linux-wireless/list/?submitter=33142 Suggested-by: Andy Shevchenko Suggested-by: Oleg Zhurakivskyy Signed-off-by: Sedat Dilek Signed-off-by: Andy Shevchenko Acked-by: Oleg Zhurakivskyy Signed-off-by: David S. Miller

NFC: nxp-nci: Remove 'default n' for the core

2019-07-29T15:56:26Z

It seems contributors follow the style of Kconfig entries where explicit 'default n' is present. The default 'default' is 'n' already, thus, drop these lines from Kconfig to make it more clear. Signed-off-by: Andy Shevchenko Tested-by: Sedat Dilek Signed-off-by: David S. Miller