linux-dev/drivers/nfc/nxp-nci, branch master

nfc: nxp-nci: Fix potential memory leak in nxp_nci_send()

2022-10-30T21:43:26Z

nxp_nci_send() will call nxp_nci_i2c_write(), and only free skb when nxp_nci_i2c_write() failed. However, even if the nxp_nci_i2c_write() run succeeds, the skb will not be freed in nxp_nci_i2c_write(). As the result, the skb will memleak. nxp_nci_send() should also free the skb when nxp_nci_i2c_write() succeeds. Fixes: dece45855a8b ("NFC: nxp-nci: Add support for NXP NCI chips") Signed-off-by: Shang XiaoJing Signed-off-by: David S. Miller

i2c: Make remove callback return void

2022-08-16T10:46:26Z

The value returned by an i2c driver's remove function is mostly ignored. (Only an error message is printed if the value is non-zero that the error is ignored.) So change the prototype of the remove function to return no value. This way driver authors are not tempted to assume that passing an error to the upper layer is a good idea. All drivers are adapted accordingly. There is no intended change of behaviour, all callbacks were prepared to return 0 before. Reviewed-by: Peter Senna Tschudin Reviewed-by: Jeremy Kerr Reviewed-by: Benjamin Mugnier Reviewed-by: Javier Martinez Canillas Reviewed-by: Crt Mori Reviewed-by: Heikki Krogerus Acked-by: Greg Kroah-Hartman Acked-by: Marek Behún # for leds-turris-omnia Acked-by: Andy Shevchenko Reviewed-by: Petr Machata # for mlxsw Reviewed-by: Maximilian Luz # for surface3_power Acked-by: Srinivas Pandruvada # for bmc150-accel-i2c + kxcjk-1013 Reviewed-by: Hans Verkuil # for media/* + staging/media/* Acked-by: Miguel Ojeda # for auxdisplay/ht16k33 + auxdisplay/lcd2s Reviewed-by: Luca Ceresoli # for versaclock5 Reviewed-by: Ajay Gupta # for ucsi_ccg Acked-by: Jonathan Cameron # for iio Acked-by: Peter Rosin # for i2c-mux-*, max9860 Acked-by: Adrien Grassein # for lontium-lt8912b Reviewed-by: Jean Delvare # for hwmon, i2c-core and i2c/muxes Acked-by: Corey Minyard # for IPMI Reviewed-by: Vladimir Oltean Acked-by: Dmitry Torokhov Acked-by: Sebastian Reichel # for drivers/power Acked-by: Krzysztof Hałasa Signed-off-by: Uwe Kleine-König Signed-off-by: Wolfram Sang

NFC: nxp-nci: add error reporting

2022-07-14T01:52:12Z

The PN7160 supports error notifications. Add the appropriate callbacks. Signed-off-by: Michael Walle Acked-by: Krzysztof Kozlowski Link: https://lore.kernel.org/r/20220712170011.2990629-1-michael@walle.cc Signed-off-by: Jakub Kicinski

NFC: nxp-nci: don't print header length mismatch on i2c error

2022-06-29T13:05:00Z

Don't print a misleading header length mismatch error if the i2c call returns an error. Instead just return the error code without any error message. Signed-off-by: Michael Walle Reviewed-by: Krzysztof Kozlowski Signed-off-by: David S. Miller

NFC: nxp-nci: Don't issue a zero length i2c_master_read()

2022-06-29T13:05:00Z

There are packets which doesn't have a payload. In that case, the second i2c_master_read() will have a zero length. But because the NFC controller doesn't have any data left, it will NACK the I2C read and -ENXIO will be returned. In case there is no payload, just skip the second i2c master read. Fixes: 6be88670fc59 ("NFC: nxp-nci_i2c: Add I2C support to NXP NCI driver") Signed-off-by: Michael Walle Reviewed-by: Krzysztof Kozlowski Signed-off-by: David S. Miller

nfc: constify nci_ops

2021-07-25T08:21:20Z

The struct nci_ops is modified by NFC core in only one case: nci_allocate_device() receives too many proprietary commands (prop_ops) to configure. This is a build time known constrain, so a graceful handling of such case is not necessary. Instead, fail the nci_allocate_device() and add BUILD_BUG_ON() to places which set these. This allows to constify the struct nci_ops (consisting of function pointers) for correctness and safety. Signed-off-by: Krzysztof Kozlowski Signed-off-by: David S. Miller

NFC: nxp-nci: remove unnecessary label

2021-06-18T19:57:30Z

Remove unnecessary label chunk_exit and return directly. Signed-off-by: wengjianfeng Signed-off-by: David S. Miller

NFC: nxp-nci: remove unnecessary labels

2021-06-18T19:08:39Z

Simplify the code by removing unnecessary labels and returning directly. Signed-off-by: wengjianfeng Signed-off-by: David S. Miller

NFC: nxp-nci: Make firmware GPIO pin optional

2020-12-02T19:58:19Z

There are other NXP NCI compatible NFC controllers such as the PN7150 that use an integrated firmware and therefore do not have a GPIO to select firmware downloading mode. To support this kind of controller, let's make the firmware GPIO optional. Signed-off-by: Frieder Schrempf Reviewed-by: Andy Shevchenko Link: https://lore.kernel.org/r/20201201113921.6572-1-frieder.schrempf@kontron.de Signed-off-by: Jakub Kicinski

treewide: replace '---help---' in Kconfig files with 'help'

2020-06-13T16:57:21Z

Since commit 84af7a6194e4 ("checkpatch: kconfig: prefer 'help' over '---help---'"), the number of '---help---' has been gradually decreasing, but there are still more than 2400 instances. This commit finishes the conversion. While I touched the lines, I also fixed the indentation. There are a variety of indentation styles found. a) 4 spaces + '---help---' b) 7 spaces + '---help---' c) 8 spaces + '---help---' d) 1 space + 1 tab + '---help---' e) 1 tab + '---help---' (correct indentation) f) 1 tab + 1 space + '---help---' g) 1 tab + 2 spaces + '---help---' In order to convert all of them to 1 tab + 'help', I ran the following commend: $ find . -name 'Kconfig*' | xargs sed -i 's/^[[:space:]]*---help---/\thelp/' Signed-off-by: Masahiro Yamada