linux-dev/drivers/pci/controller/dwc, branch linus/master

Merge tag 'pci-v5.19-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci

2022-05-27T22:25:10Z

Pull pci updates from Bjorn Helgaas: "Resource management: - Restrict E820 clipping to PCI host bridge windows (Bjorn Helgaas) - Log E820 clipping better (Bjorn Helgaas) - Add kernel cmdline options to enable/disable E820 clipping (Hans de Goede) - Disable E820 reserved region clipping for IdeaPads, Yoga, Yoga Slip, Acer Spin 5, Clevo Barebone systems where clipping leaves no usable address space for touchpads, Thunderbolt devices, etc (Hans de Goede) - Disable E820 clipping by default starting in 2023 (Hans de Goede) PCI device hotplug: - Include files to remove implicit dependencies (Christophe Leroy) - Only put Root Ports in D3 if they can signal and wake from D3 so AMD Yellow Carp doesn't miss hotplug events (Mario Limonciello) Power management: - Define pci_restore_standard_config() only for CONFIG_PM_SLEEP since it's unused otherwise (Krzysztof Kozlowski) - Power up devices completely, including anything platform firmware needs to do, during runtime resume (Rafael J. Wysocki) - Move pci_resume_bus() to PM callbacks so we observe the required bridge power-up delays (Rafael J. Wysocki) - Drop unneeded runtime_d3cold device flag (Rafael J. Wysocki) - Split pci_raw_set_power_state() between pci_power_up() and a new pci_set_low_power_state() (Rafael J. Wysocki) - Set current_state to D3cold if config read returns ~0, indicating the device is not accessible (Rafael J. Wysocki) - Do not call pci_update_current_state() from pci_power_up() so BARs and ASPM config are restored correctly (Rafael J. Wysocki) - Write 0 to PMCSR in pci_power_up() in all cases (Rafael J. Wysocki) - Split pci_power_up() to pci_set_full_power_state() to avoid some redundant operations (Rafael J. Wysocki) - Skip restoring BARs if device is not in D0 (Rafael J. Wysocki) - Rearrange and clarify pci_set_power_state() (Rafael J. Wysocki) - Remove redundant BAR restores from pci_pm_thaw_noirq() (Rafael J. Wysocki) Virtualization: - Acquire device lock before config space access lock to avoid AB/BA deadlock with sriov_numvfs_store() (Yicong Yang) Error handling: - Clear MULTI_ERR_COR/UNCOR_RCV bits, which a race could previously leave permanently set (Kuppuswamy Sathyanarayanan) Peer-to-peer DMA: - Whitelist Intel Skylake-E Root Ports regardless of which devfn they are (Shlomo Pongratz) ASPM: - Override L1 acceptable latency advertised by Intel DG2 so ASPM L1 can be enabled (Mika Westerberg) Cadence PCIe controller driver: - Set up device-specific register to allow PTM Responder to be enabled by the normal architected bit (Christian Gmeiner) - Override advertised FLR support since the controller doesn't implement FLR correctly (Parshuram Thombare) Cadence PCIe endpoint driver: - Correct bitmap size for the ob_region_map of outbound window usage (Dan Carpenter) Freescale i.MX6 PCIe controller driver: - Fix PERST# assertion/deassertion so we observe the required delays before accessing device (Francesco Dolcini) Freescale Layerscape PCIe controller driver: - Add "big-endian" DT property (Hou Zhiqiang) - Update SCFG DT property (Hou Zhiqiang) - Add "aer", "pme", "intr" DT properties (Li Yang) - Add DT compatible strings for ls1028a (Xiaowei Bao) Intel VMD host bridge driver: - Assign VMD IRQ domain before enumeration to avoid IOMMU interrupt remapping errors when MSI-X remapping is disabled (Nirmal Patel) - Revert VMD workaround that kept MSI-X remapping enabled when IOMMU remapping was enabled (Nirmal Patel) Marvell MVEBU PCIe controller driver: - Add of_pci_get_slot_power_limit() to parse the 'slot-power-limit-milliwatt' DT property (Pali Rohár) - Add mvebu support for sending Set_Slot_Power_Limit message (Pali Rohár) MediaTek PCIe controller driver: - Fix refcount leak in mtk_pcie_subsys_powerup() (Miaoqian Lin) MediaTek PCIe Gen3 controller driver: - Reset PHY and MAC at probe time (AngeloGioacchino Del Regno) Microchip PolarFlare PCIe controller driver: - Add chained_irq_enter()/chained_irq_exit() calls to mc_handle_msi() and mc_handle_intx() to avoid lost interrupts (Conor Dooley) - Fix interrupt handling race (Daire McNamara) NVIDIA Tegra194 PCIe controller driver: - Drop tegra194 MSI register save/restore, which is unnecessary since the DWC core does it (Jisheng Zhang) Qualcomm PCIe controller driver: - Add SM8150 SoC DT binding and support (Bhupesh Sharma) - Fix pipe clock imbalance (Johan Hovold) - Fix runtime PM imbalance on probe errors (Johan Hovold) - Fix PHY init imbalance on probe errors (Johan Hovold) - Convert DT binding to YAML (Dmitry Baryshkov) - Update DT binding to show that resets aren't required for MSM8996/APQ8096 platforms (Dmitry Baryshkov) - Add explicit register names per chipset in DT binding (Dmitry Baryshkov) - Add sc7280-specific clock and reset definitions to DT binding (Dmitry Baryshkov) Rockchip PCIe controller driver: - Fix bitmap size when searching for free outbound region (Dan Carpenter) Rockchip DesignWare PCIe controller driver: - Remove "snps,dw-pcie" from rockchip-dwc DT "compatible" property because it's not fully compatible with rockchip (Peter Geis) - Reset rockchip-dwc controller at probe (Peter Geis) - Add rockchip-dwc INTx support (Peter Geis) Synopsys DesignWare PCIe controller driver: - Return error instead of success if DMA mapping of MSI area fails (Jiantao Zhang) Miscellaneous: - Change pci_set_dma_mask() documentation references to dma_set_mask() (Alex Williamson)" * tag 'pci-v5.19-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (64 commits) dt-bindings: PCI: qcom: Add schema for sc7280 chipset dt-bindings: PCI: qcom: Specify reg-names explicitly dt-bindings: PCI: qcom: Do not require resets on msm8996 platforms dt-bindings: PCI: qcom: Convert to YAML PCI: qcom: Fix unbalanced PHY init on probe errors PCI: qcom: Fix runtime PM imbalance on probe errors PCI: qcom: Fix pipe clock imbalance PCI: qcom: Add SM8150 SoC support dt-bindings: pci: qcom: Document PCIe bindings for SM8150 SoC x86/PCI: Disable E820 reserved region clipping starting in 2023 x86/PCI: Disable E820 reserved region clipping via quirks x86/PCI: Add kernel cmdline options to use/ignore E820 reserved regions PCI: microchip: Fix potential race in interrupt handling PCI/AER: Clear MULTI_ERR_COR/UNCOR_RCV bits PCI: cadence: Clear FLR in device capabilities register PCI: cadence: Allow PTM Responder to be enabled PCI: vmd: Revert 2565e5b69c44 ("PCI: vmd: Do not disable MSI-X remapping if interrupt remapping is enabled by IOMMU.") PCI: vmd: Assign VMD IRQ domain before enumeration PCI: Avoid pci_dev_lock() AB/BA deadlock with sriov_numvfs_store() PCI: rockchip-dwc: Add legacy interrupt support ...

Merge branch 'pci/host/qcom'

2022-05-24T21:42:26Z

- Add SM8150 SoC DT binding and support (Bhupesh Sharma) - Fix pipe clock imbalance (Johan Hovold) - Fix runtime PM imbalance on probe errors (Johan Hovold) - Fix PHY init imbalance on probe errors (Johan Hovold) - Convert DT binding to YAML (Dmitry Baryshkov) - Update DT binding to show that resets aren't required for MSM8996/APQ8096 platforms (Dmitry Baryshkov) - Add explicit register names per chipset in DT binding (Dmitry Baryshkov) - Add sc7280-specific clock and reset definitions to DT binding (Dmitry Baryshkov) * pci/host/qcom: dt-bindings: PCI: qcom: Add schema for sc7280 chipset dt-bindings: PCI: qcom: Specify reg-names explicitly dt-bindings: PCI: qcom: Do not require resets on msm8996 platforms dt-bindings: PCI: qcom: Convert to YAML PCI: qcom: Fix unbalanced PHY init on probe errors PCI: qcom: Fix runtime PM imbalance on probe errors PCI: qcom: Fix pipe clock imbalance PCI: qcom: Add SM8150 SoC support dt-bindings: pci: qcom: Document PCIe bindings for SM8150 SoC

Merge branch 'remotes/lorenzo/pci/imx6'

2022-05-24T21:42:24Z

- Fix PERST# start-up sequence (Francesco Dolcini) * remotes/lorenzo/pci/imx6: PCI: imx6: Fix PERST# start-up sequence

PCI: qcom: Fix unbalanced PHY init on probe errors

2022-05-24T21:40:45Z

Undo the PHY initialisation (e.g. balance runtime PM) if host initialisation fails during probe. Link: https://lore.kernel.org/r/20220401133854.10421-3-johan+linaro@kernel.org Fixes: 82a823833f4e ("PCI: qcom: Add Qualcomm PCIe controller driver") Signed-off-by: Johan Hovold Signed-off-by: Lorenzo Pieralisi Signed-off-by: Bjorn Helgaas Reviewed-by: Manivannan Sadhasivam Acked-by: Stanimir Varbanov Cc: stable@vger.kernel.org # 4.5

PCI: qcom: Fix runtime PM imbalance on probe errors

2022-05-24T21:40:45Z

Drop the leftover pm_runtime_disable() calls from the late probe error paths that would, for example, prevent runtime PM from being reenabled after a probe deferral. Link: https://lore.kernel.org/r/20220401133854.10421-2-johan+linaro@kernel.org Fixes: 6e5da6f7d824 ("PCI: qcom: Fix error handling in runtime PM support") Signed-off-by: Johan Hovold Signed-off-by: Lorenzo Pieralisi Signed-off-by: Bjorn Helgaas Reviewed-by: Manivannan Sadhasivam Acked-by: Stanimir Varbanov Cc: stable@vger.kernel.org # 4.20 Cc: Bjorn Andersson

PCI: qcom: Fix pipe clock imbalance

2022-05-24T21:39:51Z

Fix a clock imbalance introduced by ed8cc3b1fc84 ("PCI: qcom: Add support for SDM845 PCIe controller"), which enables the pipe clock both in init() and in post_init() but only disables in post_deinit(). Note that the pipe clock was also never disabled in the init() error paths and that enabling the clock before powering up the PHY looks questionable. Link: https://lore.kernel.org/r/20220401133351.10113-1-johan+linaro@kernel.org Fixes: ed8cc3b1fc84 ("PCI: qcom: Add support for SDM845 PCIe controller") Signed-off-by: Johan Hovold Signed-off-by: Lorenzo Pieralisi Signed-off-by: Bjorn Helgaas Reviewed-by: Bjorn Andersson Cc: stable@vger.kernel.org # 5.6

PCI: qcom: Add SM8150 SoC support

2022-05-24T21:39:15Z

The PCIe IP (rev 1.5.0) on SM8150 SoC is similar to the one used on SM8250. Add SM8150 support, reusing the members of ops_1_9_0. Link: https://lore.kernel.org/r/20220326060810.1797516-3-bhupesh.sharma@linaro.org Signed-off-by: Bhupesh Sharma Signed-off-by: Lorenzo Pieralisi Signed-off-by: Bjorn Helgaas Reviewed-by: Dmitry Baryshkov Reviewed-by: Rob Herring Cc: Vinod Koul

PCI: rockchip-dwc: Add legacy interrupt support

2022-05-11T15:01:26Z

The legacy interrupts on the rk356x PCIe controller are handled by a single muxed interrupt. Add IRQ domain support to the pcie-dw-rockchip driver to support the virtual domain. Link: https://lore.kernel.org/r/20220429123832.2376381-4-pgwipeout@gmail.com Signed-off-by: Peter Geis Signed-off-by: Lorenzo Pieralisi Reviewed-by: Marc Zyngier

PCI: rockchip-dwc: Reset core at driver probe

2022-05-11T15:01:26Z

The PCIe controller is in an unknown state at driver probe. This can lead to undesireable effects when the driver attempts to configure the controller. Prevent issues in the future by resetting the core during probe. Link: https://lore.kernel.org/r/20220429123832.2376381-3-pgwipeout@gmail.com Tested-by: Nicolas Frattaroli Signed-off-by: Peter Geis Signed-off-by: Lorenzo Pieralisi

PCI: imx6: Fix PERST# start-up sequence

2022-05-11T12:50:45Z

According to the PCIe standard the PERST# signal (reset-gpio in fsl,imx* compatible dts) should be kept asserted for at least 100 usec before the PCIe refclock is stable, should be kept asserted for at least 100 msec after the power rails are stable and the host should wait at least 100 msec after it is de-asserted before accessing the configuration space of any attached device. From PCIe CEM r2.0, sec 2.6.2 T-PVPERL: Power stable to PERST# inactive - 100 msec T-PERST-CLK: REFCLK stable before PERST# inactive - 100 usec. From PCIe r5.0, sec 6.6.1 With a Downstream Port that does not support Link speeds greater than 5.0 GT/s, software must wait a minimum of 100 ms before sending a Configuration Request to the device immediately below that Port. Failure to do so could prevent PCIe devices to be working correctly, and this was experienced with real devices. Move reset assert to imx6_pcie_assert_core_reset(), this way we ensure that PERST# is asserted before enabling any clock, move de-assert to the end of imx6_pcie_deassert_core_reset() after the clock is enabled and deemed stable and add a new delay of 100 msec just afterward. Link: https://lore.kernel.org/all/20220211152550.286821-1-francesco.dolcini@toradex.com Link: https://lore.kernel.org/r/20220404081509.94356-1-francesco.dolcini@toradex.com Fixes: bb38919ec56e ("PCI: imx6: Add support for i.MX6 PCIe controller") Signed-off-by: Francesco Dolcini Signed-off-by: Lorenzo Pieralisi Reviewed-by: Lucas Stach Acked-by: Richard Zhu