linux-dev/drivers/pci/host/Makefile, branch master

PCI: Collect all native drivers under drivers/pci/controller/

2018-06-08T12:50:11Z

Native PCI drivers for root complex devices were originally all in drivers/pci/host/. Some of these devices can also be operated in endpoint mode. Drivers for endpoint mode didn't seem to fit in the "host" directory, so we put both the root complex and endpoint drivers in per-device directories, e.g., drivers/pci/dwc/, drivers/pci/cadence/, etc. These per-device directories contain trivial Kconfig and Makefiles and clutter drivers/pci/. Make a new drivers/pci/controllers/ directory and collect all the device-specific drivers there. No functional change intended. Link: https://lkml.kernel.org/r/1520304202-232891-1-git-send-email-shawn.lin@rock-chips.com Signed-off-by: Shawn Lin [bhelgaas: changelog] Signed-off-by: Bjorn Helgaas

PCI: rockchip: Add EP driver for Rockchip PCIe controller

2018-05-11T09:36:02Z

Add support for the Rockchip PCIe controller in endpoint mode; it currently supports up to 32 regions with each region spanning at least 1MB as per TRM. Signed-off-by: Shawn Lin [lorenzo.pieralisi@arm.com: updated commit log] Signed-off-by: Lorenzo Pieralisi

PCI: rockchip: Separate common code from RC driver

2018-05-10T11:01:49Z

In preparation for introducing EP driver for Rockchip PCIe controller, rename the RC driver from pcie-rockchip.c to pcie-rockchip-host.c, and only leave some common functions in pcie-rockchip.c in order to be reused for both of RC driver and EP driver. Signed-off-by: Shawn Lin Signed-off-by: Lorenzo Pieralisi Tested-by: Jeffy Chen

PCI: cadence: Add EndPoint Controller driver for Cadence PCIe controller

2018-01-31T11:13:27Z

This patch adds support to the Cadence PCIe controller in endpoint mode. Since pieces of source code are shared with the host driver (Root Complex mode), we create a new directory under drivers/pci dedicated to the Cadence PCIe controller. The common code is placed into drivers/pci/cadence/pcie-cadence.c and used by both the host and endpoint controller drivers. Signed-off-by: Cyrille Pitchen Signed-off-by: Lorenzo Pieralisi

PCI: cadence: Add host driver for Cadence PCIe controller

2018-01-31T11:10:31Z

This patch adds support to the Cadence PCIe controller in host mode. Signed-off-by: Cyrille Pitchen Signed-off-by: Lorenzo Pieralisi

PCI: Regroup all PCI related entries into drivers/pci/Makefile

2018-01-31T11:09:20Z

Clean up drivers/Makefile by moving the pci/endpoint and pci/dwc entries from drivers/Makefile into drivers/pci/Makefile. Since we don't want to introduce any dependency between CONFIG_PCI and CONFIG_PCI_ENDPOINT, we now always execute drivers/pci/Makefile. Hence all Makefiles in drivers/pci/ were updated accordingly so no file is compiled when CONFIG_PCI is not defined. Also, we add a comment to reinforce that EPC and EPF libraries must be initialized before their users. Hence built-in EPC drivers, such as those of Designware, are linked after the endpoint core libraries. Finally, we add another comment to explain why obj-y has been chosen instead of obj-$(CONFIG_PCIE_DW) to parse the dwc/ sub-folder. Signed-off-by: Cyrille Pitchen Signed-off-by: Lorenzo Pieralisi

Merge tag 'pci-v4.15-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci

2017-11-15T23:01:28Z

Pull PCI updates from Bjorn Helgaas: - detach driver before tearing down procfs/sysfs (Alex Williamson) - disable PCIe services during shutdown (Sinan Kaya) - fix ASPM oops on systems with no Root Ports (Ard Biesheuvel) - fix ASPM LTR_L1.2_THRESHOLD programming (Bjorn Helgaas) - fix ASPM Common_Mode_Restore_Time computation (Bjorn Helgaas) - fix portdrv MSI/MSI-X vector allocation (Dongdong Liu, Bjorn Helgaas) - report non-fatal AER errors only to the affected endpoint (Gabriele Paoloni) - distribute bus numbers, MMIO, and I/O space among hotplug bridges to allow more devices to be hot-added (Mika Westerberg) - fix pciehp races during initialization and surprise link down (Mika Westerberg) - handle surprise-removed devices in PME handling (Qiang) - support resizable BARs for large graphics devices (Christian König) - expose SR-IOV offset, stride, and VF device ID via sysfs (Filippo Sironi) - create SR-IOV virtfn/physfn sysfs links before attaching driver (Stuart Hayes) - fix SR-IOV "ARI Capable Hierarchy" restore issue (Tony Nguyen) - enforce Kconfig IOV/REALLOC dependency (Sascha El-Sharkawy) - avoid slot reset if bridge itself is broken (Jan Glauber) - clean up pci_reset_function() path (Jan H. Schönherr) - make pci_map_rom() fail if the option ROM is invalid (Changbin Du) - convert timers to timer_setup() (Kees Cook) - move PCI_QUIRKS to PCI bus Kconfig menu (Randy Dunlap) - constify pci_dev_type and intel_mid_pci_ops (Bhumika Goyal) - remove unnecessary pci_dev, pci_bus, resource, pcibios_set_master() declarations (Bjorn Helgaas) - fix endpoint framework overflows and BUG()s (Dan Carpenter) - fix endpoint framework issues (Kishon Vijay Abraham I) - avoid broken Cavium CN8xxx bus reset behavior (David Daney) - extend Cavium ACS capability quirks (Vadim Lomovtsev) - support Synopsys DesignWare RC in ECAM mode (Ard Biesheuvel) - turn off dra7xx clocks cleanly on shutdown (Keerthy) - fix Faraday probe error path (Wei Yongjun) - support HiSilicon STB SoC PCIe host controller (Jianguo Sun) - fix Hyper-V interrupt affinity issue (Dexuan Cui) - remove useless ACPI warning for Hyper-V pass-through devices (Vitaly Kuznetsov) - support multiple MSI on iProc (Sandor Bodo-Merle) - support Layerscape LS1012a and LS1046a PCIe host controllers (Hou Zhiqiang) - fix Layerscape default error response (Minghuan Lian) - support MSI on Tango host controller (Marc Gonzalez) - support Tegra186 PCIe host controller (Manikanta Maddireddy) - use generic accessors on Tegra when possible (Thierry Reding) - support V3 Semiconductor PCI host controller (Linus Walleij) * tag 'pci-v4.15-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (85 commits) PCI/ASPM: Add L1 Substates definitions PCI/ASPM: Reformat ASPM register definitions PCI/ASPM: Use correct capability pointer to program LTR_L1.2_THRESHOLD PCI/ASPM: Account for downstream device's Port Common_Mode_Restore_Time PCI: xgene: Rename xgene_pcie_probe_bridge() to xgene_pcie_probe() PCI: xilinx: Rename xilinx_pcie_link_is_up() to xilinx_pcie_link_up() PCI: altera: Rename altera_pcie_link_is_up() to altera_pcie_link_up() PCI: Fix kernel-doc build warning PCI: Fail pci_map_rom() if the option ROM is invalid PCI: Move pci_map_rom() error path PCI: Move PCI_QUIRKS to the PCI bus menu alpha/PCI: Make pdev_save_srm_config() static PCI: Remove unused declarations PCI: Remove redundant pci_dev, pci_bus, resource declarations PCI: Remove redundant pcibios_set_master() declarations PCI/PME: Handle invalid data when reading Root Status PCI: hv: Use effective affinity mask PCI: pciehp: Do not clear Presence Detect Changed during initialization PCI: pciehp: Fix race condition handling surprise link down PCI: Distribute available resources to hotplug-capable bridges ...

License cleanup: add SPDX GPL-2.0 license identifier to files with no license

2017-11-02T10:10:55Z

Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart Reviewed-by: Philippe Ombredanne Reviewed-by: Thomas Gleixner Signed-off-by: Greg Kroah-Hartman

PCI: v3-semi: Add V3 Semiconductor PCI host driver

2017-10-05T20:52:55Z

This PCI host bridge from V3 Semiconductor needs no further introduction. An ancient driver for it has been sitting in arch/arm/mach-integrator/pci_v3.* since before v2.6.12 and the initial migration to git. But we need to get the drivers out of arch/arm/* and get proper handling of the old drivers, rewrite and clean up so the PCI maintainer can control the mass of drivers without having to run all over the kernel. We also switch swiftly to all the new infrastructure found in the PCI hosts as of late. Some code is preserved so I have added an extensive list of authors in the top comment section. This driver probes with the following result: OF: PCI: host bridge /pciv3@62000000 ranges: OF: PCI: No bus range found for /pciv3@62000000, using [bus 00-ff] OF: PCI: IO 0x60000000..0x6000ffff -> 0x00000000 OF: PCI: MEM 0x40000000..0x4fffffff -> 0x40000000 OF: PCI: MEM 0x50000000..0x5fffffff -> 0x50000000 pci-v3-semi 62000000.pciv3: initialized PCI V3 Integrator/AP integration pci-v3-semi 62000000.pciv3: PCI host bridge to bus 0000:00 pci_bus 0000:00: root bus resource [bus 00-ff] pci_bus 0000:00: root bus resource [io 0x0000-0xffff] pci_bus 0000:00: root bus resource [mem 0x40000000-0x4fffffff] pci_bus 0000:00: root bus resource [mem 0x50000000-0x5fffffff pref] pci-v3-semi 62000000.pciv3: parity error interrupt pci-v3-semi 62000000.pciv3: master abort error interrupt pci-v3-semi 62000000.pciv3: PCI target LB->PCI READ abort interrupt pci-v3-semi 62000000.pciv3: master abort error interrupt (repeats a few times) pci 0000:00:09.0: [1011:0024] type 01 class 0x060400 pci-v3-semi 62000000.pciv3: master abort error interrupt pci-v3-semi 62000000.pciv3: PCI target LB->PCI READ abort interrupt pci 0000:00:0b.0: [8086:1229] type 00 class 0x020000 pci 0000:00:0b.0: reg 0x10: [mem 0x00000000-0x00000fff pref] pci 0000:00:0b.0: reg 0x14: [io 0x0000-0x001f] pci 0000:00:0b.0: reg 0x18: [mem 0x00000000-0x000fffff] pci 0000:00:0b.0: reg 0x30: [mem 0x00000000-0x000fffff pref] pci 0000:00:0b.0: supports D1 D2 pci 0000:00:0b.0: PME# supported from D0 D1 D2 D3hot pci 0000:00:0c.0: [5333:8811] type 00 class 0x030000 pci 0000:00:0c.0: reg 0x10: [mem 0x00000000-0x03ffffff] pci 0000:00:0c.0: reg 0x30: [mem 0x00000000-0x0000ffff pref] pci 0000:00:0c.0: vgaarb: VGA device added: decodes=io+mem,owns=io,locks=none PCI: bus0: Fast back to back transfers disabled PCI: bus1: Fast back to back transfers enabled pci 0000:00:0c.0: BAR 0: assigned [mem 0x40000000-0x43ffffff] pci 0000:00:0b.0: BAR 2: assigned [mem 0x44000000-0x440fffff] pci 0000:00:0b.0: BAR 6: assigned [mem 0x50000000-0x500fffff pref] pci 0000:00:0c.0: BAR 6: assigned [mem 0x50100000-0x5010ffff pref] pci 0000:00:0b.0: BAR 0: assigned [mem 0x50110000-0x50110fff pref] pci 0000:00:0b.0: BAR 1: assigned [io 0x1000-0x101f] pci 0000:00:09.0: PCI bridge to [bus 01] pci 0000:00:0b.0: Firmware left e100 interrupts enabled; disabling (...) e100: Intel(R) PRO/100 Network Driver, 3.5.24-k2-NAPI e100: Copyright(c) 1999-2006 Intel Corporation e100 0000:00:0b.0: enabling device (0146 -> 0147) e100 0000:00:0b.0 eth0: addr 0x50110000, irq 31, MAC addr 00:08:c7:99:d2:57 > lspci 00:0b.0 Class 0200: 8086:1229 00:09.0 Class 0604: 1011:0024 00:0c.0 Class 0300: 5333:8811 > cat /proc/iomem 40000000-4fffffff : V3 PCI NON-PRE-MEM 40000000-43ffffff : 0000:00:0c.0 44000000-440fffff : 0000:00:0b.0 44000000-440fffff : e100 50000000-5fffffff : V3 PCI PRE-MEM 50000000-500fffff : 0000:00:0b.0 50100000-5010ffff : 0000:00:0c.0 50110000-50110fff : 0000:00:0b.0 50110000-50110fff : e100 61000000-61ffffff : /pciv3@62000000 62000000-6200ffff : /pciv3@62000000 Signed-off-by: Linus Walleij [bhelgaas: fold in %pR fixes from Arnd Bergmann : http://lkml.kernel.org/r/20171011140224.3770968-1-arnd@arndb.de] Signed-off-by: Bjorn Helgaas CC: Marc Gonzalez

Merge branch 'pci/host-tango' into next

2017-07-07T18:42:25Z

* pci/host-tango: PCI: tango: Add Sigma Designs Tango SMP8759 PCIe host bridge support PCI: Add DT binding for Sigma Designs Tango PCIe controller Conflicts: drivers/pci/host/Kconfig drivers/pci/host/Makefile