linux-dev/drivers/perf/hisilicon, branch linus/master

drivers/perf: hisi: Add Support for CPA PMU

2022-05-06T14:14:31Z

On HiSilicon Hip09 platform, there is a CPA (Coherency Protocol Agent) on each SICL (Super IO Cluster) which implements packet format translation, route parsing and traffic statistics. CPA PMU has 8 PMU counters and interrupt is supported to handle counter overflow. Let's support its driver under the framework of HiSilicon PMU driver. Signed-off-by: Qi Liu Reviewed-by: John Garry Reviewed-by: Shaokun Zhang Link: https://lore.kernel.org/r/20220415102352.6665-3-liuqi115@huawei.com Signed-off-by: Will Deacon

drivers/perf: hisi: Associate PMUs in SICL with CPUs online

2022-05-06T14:14:31Z

If a PMU is in a SICL (Super IO cluster), it is not appropriate to associate this PMU with a CPU die. So we associate it with all CPUs online, rather than CPUs in the nearest SCCL. As the firmware of Hip09 platform hasn't been published yet, change of PMU driver will not influence backwards compatibility between driver and firmware. Signed-off-by: Qi Liu Reviewed-by: John Garry Link: https://lore.kernel.org/r/20220415102352.6665-2-liuqi115@huawei.com Signed-off-by: Will Deacon

perf: replace bitmap_weight with bitmap_empty where appropriate

2022-02-15T14:38:57Z

In some places, drivers/perf code calls bitmap_weight() to check if any bit of a given bitmap is set. It's better to use bitmap_empty() in that case because bitmap_empty() stops traversing the bitmap as soon as it finds first set bit, while bitmap_weight() counts all bits unconditionally. Signed-off-by: Yury Norov Acked-by: Mark Rutland Link: https://lore.kernel.org/r/20220210224933.379149-13-yury.norov@gmail.com Signed-off-by: Will Deacon

drivers/perf: hisi: Add driver for HiSilicon PCIe PMU

2021-12-14T12:30:26Z

PCIe PMU Root Complex Integrated End Point(RCiEP) device is supported to sample bandwidth, latency, buffer occupation etc. Each PMU RCiEP device monitors multiple Root Ports, and each RCiEP is registered as a PMU in /sys/bus/event_source/devices, so users can select target PMU, and use filter to do further sets. Filtering options contains: event - select the event. port - select target Root Ports. Information of Root Ports are shown under sysfs. bdf - select requester_id of target EP device. trig_len - set trigger condition for starting event statistics. trig_mode - set trigger mode. 0 means starting to statistic when bigger than trigger condition, and 1 means smaller. thr_len - set threshold for statistics. thr_mode - set threshold mode. 0 means count when bigger than threshold, and 1 means smaller. Acked-by: Krzysztof Wilczyński Reviewed-by: John Garry Signed-off-by: Qi Liu Reviewed-by: Shaokun Zhang Link: https://lore.kernel.org/r/20211202080633.2919-3-liuqi115@huawei.com Signed-off-by: Will Deacon

drivers/perf: hisi: Fix PA PMU counter offset

2021-10-04T12:10:14Z

The PA PMU counter offset was correct in [1] and the driver has already been verified. We want to keep the register offset using lower case character in later version that is consistent with the existed driver. Since there was no functional change, we didn't do more test. However there is typo when modified the PA PMU counter offset by mistake, so fix this bad mistake. [1] https://www.spinics.net/lists/arm-kernel/msg865263.html Cc: Will Deacon Cc: Mark Rutland Cc: John Garry Cc: Qi Liu Signed-off-by: Shaokun Zhang Link: https://lore.kernel.org/r/20210928123022.23467-1-zhangshaokun@hisilicon.com Signed-off-by: Will Deacon

perf/hisi: Constify static attribute_group structs

2021-06-08T11:49:54Z

These are only put in an array of pointers to const attribute_group structs. Make them const like the other static attribute_group structs to allow the compiler to put them in read-only memory. Signed-off-by: Rikard Falkeborn Link: https://lore.kernel.org/r/20210605221514.73449-1-rikard.falkeborn@gmail.com Signed-off-by: Will Deacon

drivers/perf: hisi: Fix data source control

2021-06-04T18:21:09Z

'Data source' is a new function for HHA PMU and config / clear interface was wrong by mistake. 'HHA_DATSRC_CTRL' register is mainly used for data source configuration, if we enable bit0 as driver, it will go on count the event and we didn't check it carefully. So fix the issue and do as the initial purpose. Fixes: 932f6a99f9b0 ("drivers/perf: hisi: Add new functions for HHA PMU") Reported-by: kernel test robot Cc: Will Deacon Cc: Mark Rutland Signed-off-by: Shaokun Zhang Link: https://lore.kernel.org/r/1622709291-37996-1-git-send-email-zhangshaokun@hisilicon.com Signed-off-by: Will Deacon

drivers/perf: hisi: use the correct HiSilicon copyright

2021-06-01T13:18:47Z

s/Hisilicon/HiSilicon/. It should use capital S, according to the official website https://www.hisilicon.com/en. Signed-off-by: Hao Fang Link: https://lore.kernel.org/r/1621679037-15323-1-git-send-email-fanghao11@huawei.com Signed-off-by: Will Deacon

perf/hisi: Use irq_set_affinity()

2021-05-24T10:02:00Z

These drivers use irq_set_affinity_hint() to set the affinity for the PMU interrupts, which relies on the undocumented side effect that this function actually sets the affinity under the hood. Setting an hint is clearly not a guarantee and for these PMU interrupts an affinity hint, which is supposed to guide userspace for setting affinity, is beyond pointless, because the affinity of these interrupts cannot be modified from user space. Aside of that the error checks are bogus because the only error which is returned from irq_set_affinity_hint() is when there is no irq descriptor for the interrupt number, but not when the affinity set fails. That's on purpose because the hint can point to an offline CPU. Replace the mindless abuse with irq_set_affinity(). Signed-off-by: Thomas Gleixner Cc: Shaokun Zhang Cc: Will Deacon Cc: Mark Rutland Cc: linux-arm-kernel@lists.infradead.org Acked-by: Mark Rutland Link: https://lore.kernel.org/r/20210518093118.813375875@linutronix.de Signed-off-by: Will Deacon

drivers/perf: hisi: Add support for HiSilicon PA PMU driver

2021-03-25T13:03:46Z

On HiSilicon Hip09 platform, there is a PA (Protocol Adapter) module on each chip SICL (Super I/O Cluster) which incorporates three Hydra interface and facilitates the cache coherency between the dies on the chip. While PA uncore PMU model is the same as other Hip09 PMU modules and many PMU events are supported. Let's support the PMU driver using the HiSilicon uncore PMU framework. PA PMU supports the following filter functions: * tracetag_en: allows user to count events according to tt_req or tt_core set in L3C PMU. It's the same as other PMUs. * srcid_cmd & srcid_msk: allows user to filter statistics that come from specific CCL/ICL by configuration source ID. * tgtid_cmd & tgtid_msk: it is the similar function to srcid_cmd & srcid_msk. Both are used to check where the data comes from or go to. Cc: Mark Rutland Cc: Will Deacon Cc: John Garry Cc: Jonathan Cameron Reviewed-by: John Garry Co-developed-by: Qi Liu Signed-off-by: Qi Liu Signed-off-by: Shaokun Zhang Link: https://lore.kernel.org/r/1615186237-22263-9-git-send-email-zhangshaokun@hisilicon.com Signed-off-by: Will Deacon