linux-dev/drivers/phy/hisilicon/Makefile, branch master

phy: HiSilicon: Add driver for Kirin 970 PCIe PHY

2021-10-01T08:12:18Z

The Kirin 970 PHY is somewhat similar to the Kirin 960, but it does a lot more. Add the needed bits for PCIe to start working on HiKey 970 boards. Co-developed-by: Manivannan Sadhasivam Signed-off-by: Manivannan Sadhasivam Signed-off-by: Mauro Carvalho Chehab Link: https://lore.kernel.org/r/b7a4ff41b57d861b003f1a00cae81f3d226fbe18.1632814194.git.mchehab+huawei@kernel.org Signed-off-by: Vinod Koul

phy: phy-hi3670-usb3: move driver from staging into phy

2021-06-25T08:02:02Z

The phy USB3 driver for Hisilicon 970 (hi3670) is ready for mainstream. Mode it from staging into the main driver's phy/ directory. Acked-by: Rob Herring Acked-By: Vinod Koul Signed-off-by: Mauro Carvalho Chehab Link: https://lore.kernel.org/r/dcf66a01aaeaab93cda52f9a283ecbdf9fa71bb8.1624606660.git.mchehab+huawei@kernel.org Signed-off-by: Greg Kroah-Hartman

treewide: Add SPDX license identifier - Makefile/Kconfig

2019-05-21T08:50:46Z

Add SPDX license identifiers to all Make/Kconfig files which: - Have no license information of any form These files fall under the project license, GPL v2 only. The resulting SPDX license identifier is: GPL-2.0-only Signed-off-by: Thomas Gleixner Signed-off-by: Greg Kroah-Hartman

phy: Add usb phy support for hi3660 Soc of Hisilicon

2019-04-18T16:38:25Z

This driver handles usb phy power on and shutdown for hi3660 Soc of Hisilicon. Cc: Andy Shevchenko Cc: Kishon Vijay Abraham I Cc: "David S. Miller" Cc: Greg Kroah-Hartman Cc: Mauro Carvalho Chehab Cc: Andrew Morton Cc: Arnd Bergmann Cc: Shawn Guo Cc: Pengcheng Li Cc: Jianguo Sun Cc: Masahiro Yamada Cc: Jiancheng Xue Cc: John Stultz Cc: Binghui Wang Reviewed-by: Andy Shevchenko Signed-off-by: Yu Chen Signed-off-by: Kishon Vijay Abraham I

phy: add inno-usb2-phy driver for hi3798cv200 SoC

2018-03-16T11:25:29Z

It adds inno-usb2-phy driver for hi3798cv200 SoC USB 2.0 support. One inno-usb2-phy device can support up to two PHY ports. While there is device level reference clock and power reset to be controlled, each PHY port has its own utmi reset that needs to assert/de-assert as needed. Hi3798cv200 needs to access PHY port0 register via particular peripheral syscon controller register to control PHY, like turning on PHY clock. Signed-off-by: Pengcheng Li Signed-off-by: Jiancheng Xue Signed-off-by: Shawn Guo Signed-off-by: Kishon Vijay Abraham I

phy: add combo phy driver for HiSilicon STB SoCs

2018-02-21T06:24:37Z

Add combo phy driver for HiSilicon STB SoCs. This phy can be used as pcie-phy, sata-phy or usb-phy. Changes for v5: - Add bindings doc for Hi3798CV200 peripheral controller, and refer to the bindings of this parent node in combphy bindings doc. Changes for v4: - Instead of relying on device id, add a new property hisilicon,fixed-mode for combphy device that doesn't support mode select but a fixed phy mode. - Move combphy mode select register bits definition to device tree, as it may vary from one device to another. Changes for v3: - Make combphy device be child of peripheral controller and use 'reg' property for mapping combphy configuration registers. - Kill "hisilicon,peripheral-syscon" property, since parent node is just the syscon controller now. - Check combphy id to handle the quirk that combphy0 can not configure mode but always works in USB3 mode. - Unify phy .init and .exit hooks for different combphy instances and work modes, as the only quirk we need to handle is that combphy0 can only work in USB3 mode. - Better naming for clock and reset, 'ref' to 'ref_clk', 'por' to 'por_rst'. Changes for v2: - Move DT bindings into a separate patch. - Drop the spurious newline from drivers/phy/Makefile. - Use the phy type defines in dt-bindings/phy/phy.h. - Use PTR_ERR_OR_ZERO() for checking return from devm_of_phy_provider_register(). - Add USB3 phy support. Signed-off-by: Jianguo Sun Signed-off-by: Shawn Guo Signed-off-by: Kishon Vijay Abraham I

phy: Group vendor specific phy drivers

2017-06-01T09:58:33Z

Adding vendor specific directories in phy to group phy drivers under their respective vendor umbrella. Also updated the MAINTAINERS file to reflect the correct directory structure for phy drivers. Signed-off-by: Vivek Gautam Acked-by: Heiko Stuebner Acked-by: Viresh Kumar Acked-by: Krzysztof Kozlowski Acked-by: Yoshihiro Shimoda Reviewed-by: Jaehoon Chung Cc: Kishon Vijay Abraham I Cc: David S. Miller Cc: Geert Uytterhoeven Cc: Yoshihiro Shimoda Cc: Guenter Roeck Cc: Heiko Stuebner Cc: Viresh Kumar Cc: Maxime Ripard Cc: Chen-Yu Tsai Cc: Sylwester Nawrocki Cc: Krzysztof Kozlowski Cc: Jaehoon Chung Cc: Stephen Boyd Cc: Martin Blumenstingl Cc: linux-arm-kernel@lists.infradead.org Cc: linux-arm-msm@vger.kernel.org Cc: linux-kernel@vger.kernel.org Cc: linux-omap@vger.kernel.org Cc: linux-renesas-soc@vger.kernel.org Cc: linux-rockchip@lists.infradead.org Cc: linux-samsung-soc@vger.kernel.org Cc: linux-usb@vger.kernel.org Signed-off-by: Kishon Vijay Abraham I