linux-dev/drivers/phy/marvell/Kconfig, branch master

phy: marvell: phy-mvebu-cp11i-utmi needs USB_COMMON

2021-04-06T05:04:20Z

When USB and USB_COMMON are not enabled, phy-mvebu-cp110-utmi suffers a build error due to a missing interface that is provided by CONFIG_USB_COMMON, so make the driver depend on USB_COMMON. ld: drivers/phy/marvell/phy-mvebu-cp110-utmi.o: in function `mvebu_cp110_utmi_phy_probe': phy-mvebu-cp110-utmi.c:(.text+0x152): undefined reference to `of_usb_get_dr_mode_by_phy' Signed-off-by: Randy Dunlap Cc: Kostya Porotchkin Cc: Kishon Vijay Abraham I Cc: Vinod Koul Cc: linux-phy@lists.infradead.org Link: https://lore.kernel.org/r/20210401210045.23525-1-rdunlap@infradead.org Signed-off-by: Vinod Koul

phy: marvell: ARMADA375_USBCLUSTER_PHY should not default to y, unconditionally

2021-03-30T18:05:17Z

Merely enabling CONFIG_COMPILE_TEST should not enable additional code. To fix this, restrict the automatic enabling of ARMADA375_USBCLUSTER_PHY to MACH_ARMADA_375, and ask the user in case of compile-testing. Fixes: eee47538ec1f2619 ("phy: add support for USB cluster on the Armada 375 SoC") Signed-off-by: Geert Uytterhoeven Link: https://lore.kernel.org/r/20210208150252.424706-1-geert+renesas@glider.be Signed-off-by: Vinod Koul

drivers: phy: add support for Armada CP110 UTMI PHY

2021-03-30T18:02:53Z

Add support for Marvell CP110 UTMI PHY driver allowing the USB2 port configuration independently from the boot loader setup. The CP110/CP115 dies have 2 UTMI PHYs that could be connected to two USB host controllers or to single USB device controller. Since there is only one USB device controller on die, only one of the UTMI PHYs could work in USB device mode. The CONFIG_PHY_MVEBU_CP110_UTMI should be enabled for usage of this driver. Signed-off-by: Konstantin Porotchkin Link: https://lore.kernel.org/r/20210307163343.25684-2-kostap@marvell.com Signed-off-by: Vinod Koul

phy: Add USB HSIC PHY driver for Marvell MMP3 SoC

2020-11-02T14:25:45Z

Add PHY driver for the HSICs found on Marvell MMP3 SoC. The driver is rather straightforward -- the PHY essentially just needs to be enabled. Signed-off-by: Lubomir Rintel Link: https://lore.kernel.org/r/20200925235828.228626-4-lkundrak@v3.sk Signed-off-by: Vinod Koul

phy: Enable compile testing for some of drivers

2020-01-06T09:35:00Z

Some of the phy drivers can be compile tested to increase build coverage. Signed-off-by: Krzysztof Kozlowski Link: https://lore.kernel.org/r/20200103164710.4829-2-krzk@kernel.org Signed-off-by: Greg Kroah-Hartman

phy: Add USB2 PHY driver for Marvell MMP3 SoC

2019-10-17T14:43:04Z

Add PHY driver for the USB2 PHY found on Marvell MMP3 SoC. Signed-off-by: Lubomir Rintel Acked-by: Kishon Vijay Abraham I

phy: mvebu-cp110-comphy: Add SMC call support

2019-08-27T06:07:09Z

Keep the exact same list of supported configurations but first try to use the firmware's implementation. If it fails, try the legacy method: Linux implementation. Signed-off-by: Grzegorz Jaszczyk [miquel.raynal@bootlin.com: adapt the content to the mainline driver] Signed-off-by: Miquel Raynal Tested-by: Maxime Chevallier Tested-by: Grzegorz Jaszczyk Signed-off-by: Kishon Vijay Abraham I

treewide: Add SPDX license identifier - Makefile/Kconfig

2019-05-21T08:50:46Z

Add SPDX license identifiers to all Make/Kconfig files which: - Have no license information of any form These files fall under the project license, GPL v2 only. The resulting SPDX license identifier is: GPL-2.0-only Signed-off-by: Thomas Gleixner Signed-off-by: Greg Kroah-Hartman

Merge tag 'usb-5.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb

2019-03-07T00:48:27Z

Pull USB/PHY updates from Greg KH: "Here is the big USB/PHY driver pull request for 5.1-rc1. The usual set of gadget driver updates, phy driver updates, xhci updates, and typec additions. Also included in here are a lot of small cleanups and fixes and driver updates where needed. All of these have been in linux-next for a while with no reported issues" * tag 'usb-5.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (167 commits) wusb: Remove unnecessary static function ckhdid_printf usb: core: make default autosuspend delay configurable usb: core: Fix typo in description of "authorized_default" usb: chipidea: Refactor USB PHY selection and keep a single PHY usb: chipidea: Grab the (legacy) USB PHY by phandle first usb: chipidea: imx: set power polarity dt-bindings: usb: ci-hdrc-usb2: add property power-active-high usb: chipidea: imx: remove unused header files usb: chipidea: tegra: Fix missed ci_hdrc_remove_device() usb: core: add option of only authorizing internal devices usb: typec: tps6598x: handle block writes separately with plain-I2C adapters usb: xhci: Fix for Enabling USB ROLE SWITCH QUIRK on INTEL_SUNRISEPOINT_LP_XHCI usb: xhci: fix build warning - missing prototype usb: xhci: dbc: Fixing typo error. usb: xhci: remove unused member 'parent' in xhci_regset struct xhci: tegra: Prevent error pointer dereference USB: serial: option: add Telit ME910 ECM composition usb: core: Replace hardcoded check with inline function from usb.h usb: core: skip interfaces disabled in devicetree usb: typec: mux: remove redundant check on variable match ...

phy: armada38x: add common phy support

2019-02-08T02:10:25Z

Add support for the Armada 38x common phy to allow us to change the speed of the Ethernet serdes lane. This driver only supports manipulation of the speed, it does not support configuration of the common phy. Signed-off-by: Russell King Signed-off-by: David S. Miller