linux-dev/drivers/pinctrl/aspeed, branch master

pinctrl: aspeed: Force to disable the function's signal

2022-08-31T12:14:31Z

When the driver want to disable the signal of the function, it doesn't need to query the state of the mux function's signal on a pin. The condition below will miss the disable of the signal: Ball | Default | P0 Signal | P0 Expression | Other -----+---------+-----------+-----------------------------+---------- E21 GPIOG0 SD2CLK SCU4B4[16]=1 & SCU450[1]=1 GPIOG0 -----+---------+-----------+-----------------------------+---------- B22 GPIOG1 SD2CMD SCU4B4[17]=1 & SCU450[1]=1 GPIOG1 -----+---------+-----------+-----------------------------+---------- Assume the register status like below: SCU4B4[16] == 1 & SCU4B4[17] == 1 & SCU450[1]==1 After the driver set the Ball E21 to the GPIOG0: SCU4B4[16] == 0 & SCU4B4[17] == 1 & SCU450[1]==0 When the driver want to set the Ball B22 to the GPIOG1, the condition of the SD2CMD will be false causing SCU4B4[17] not to be cleared. Signed-off-by: Billy Tsai Acked-by: Andrew Jeffery Link: https://lore.kernel.org/r/20220818101839.28860-1-billy_tsai@aspeedtech.com Signed-off-by: Linus Walleij

Merge tag 'pinctrl-v6.0-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl

2022-08-10T18:01:44Z

Pull pin control updates from Linus Walleij: "Outside the pinctrl driver and DT bindings we hit some Arm DT files, patched by the maintainers. Other than that it is business as usual. Core changes: - Add PINCTRL_PINGROUP() helper macro (and use it in the AMD driver). New drivers: - Intel Meteor Lake support. - Reneasas RZ/V2M and r8a779g0 (R-Car V4H). - AXP209 variants AXP221, AXP223 and AXP809. - Qualcomm MSM8909, PM8226, PMP8074 and SM6375. - Allwinner D1. Improvements: - Proper pin multiplexing in the AMD driver. - Mediatek MT8192 can use generic drive strength and pin bias, then fixes on top plus some I2C pin group fixes. - Have the Allwinner Sunplus SP7021 use the generic DT schema and make interrupts optional. - Handle Qualcomm SC7280 ADSP. - Handle Qualcomm MSM8916 CAMSS GP clock muxing. - High impedance bias on ZynqMP. - Serialize StarFive access to MMIO. - Immutable gpiochip for BCM2835, Ingenic, Qualcomm SPMI GPIO" * tag 'pinctrl-v6.0-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (117 commits) dt-bindings: pinctrl: qcom,pmic-gpio: add PM8226 constraints pinctrl: qcom: Make PINCTRL_SM8450 depend on PINCTRL_MSM pinctrl: qcom: sm8250: Fix PDC map pinctrl: amd: Fix an unused variable dt-bindings: pinctrl: mt8186: Add and use drive-strength-microamp dt-bindings: pinctrl: mt8186: Add gpio-line-names property ARM: dts: imxrt1170-pinfunc: Add pinctrl binding header pinctrl: amd: Use unicode for debugfs output pinctrl: amd: Fix newline declaration in debugfs output pinctrl: at91: Fix typo 'the the' in comment dt-bindings: pinctrl: st,stm32: Correct 'resets' property name pinctrl: mvebu: Missing a blank line after declarations. pinctrl: qcom: Add SM6375 TLMM driver dt-bindings: pinctrl: Add DT schema for SM6375 TLMM dt-bindings: pinctrl: mt8195: Use drive-strength-microamp in examples Revert "pinctrl: qcom: spmi-gpio: make the irqchip immutable" pinctrl: imx93: Add MODULE_DEVICE_TABLE() pinctrl: sunxi: Add driver for Allwinner D1 pinctrl: sunxi: Make some layout parameters dynamic pinctrl: sunxi: Refactor register/offset calculation ...

pinctrl: aspeed: Fix typo in comment

2022-06-28T12:30:11Z

Delete the redundant word 'and'. Signed-off-by: Xiang wangx Reviewed-by: Paul Menzel Link: https://lore.kernel.org/r/20220618130854.12321-1-wangxiang@cdjrlc.com Signed-off-by: Linus Walleij

pinctrl: aspeed: Fix potential NULL dereference in aspeed_pinmux_set_mux()

2022-06-15T13:19:57Z

pdesc could be null but still dereference pdesc->name and it will lead to a null pointer access. So we move a null check before dereference. Signed-off-by: Haowen Bai Link: https://lore.kernel.org/r/1650508019-22554-1-git-send-email-baihaowen@meizu.com Signed-off-by: Linus Walleij

pinctrl: pinctrl-aspeed-g6: add FWQSPI function-group

2022-04-13T02:23:52Z

Add FWSPIDQ2 (AE12) and FWSPIDQ3 (AF12) function-group to support AST2600 FW SPI quad mode. These pins can be used with dedicated FW SPI pins - FWSPICS0# (AB14), FWSPICK (AF13), FWSPIMOSI (AC14) and FWSPIMISO (AB13). Signed-off-by: Johnny Huang Signed-off-by: Jae Hyun Yoo Reviewed-by: Andrew Jeffery Link: https://lore.kernel.org/r/20220329173932.2588289-5-quic_jaehyoo@quicinc.com Signed-off-by: Joel Stanley

pinctrl: pinctrl-aspeed-g6: remove FWQSPID group in pinctrl

2022-04-13T02:23:52Z

FWSPIDQ2 and FWSPIDQ3 are not part of FWSPI18 interface so remove FWQSPID group in pinctrl. These pins must be used with the FWSPI pins that are dedicated for boot SPI interface which provides same 3.3v logic level. Fixes: 2eda1cdec49f ("pinctrl: aspeed: Add AST2600 pinmux support") Signed-off-by: Jae Hyun Yoo Reviewed-by: Andrew Jeffery Link: https://lore.kernel.org/r/20220329173932.2588289-3-quic_jaehyoo@quicinc.com Signed-off-by: Joel Stanley

pinctrl: aspeed: fix unmet dependencies on MFD_SYSCON for PINCTRL_ASPEED

2021-12-16T03:28:49Z

When PINCTRL_ASPEED_G* is selected, and MFD_SYSCON is not selected, Kbuild gives the following warnings: WARNING: unmet direct dependencies detected for PINCTRL_ASPEED Depends on [n]: PINCTRL [=y] && (ARCH_ASPEED [=n] || COMPILE_TEST [=y]) && OF [=y] && MFD_SYSCON [=n] Selected by [y]: - PINCTRL_ASPEED_G4 [=y] && PINCTRL [=y] && (MACH_ASPEED_G4 [=n] || COMPILE_TEST [=y]) && OF [=y] WARNING: unmet direct dependencies detected for PINCTRL_ASPEED Depends on [n]: PINCTRL [=y] && (ARCH_ASPEED [=n] || COMPILE_TEST [=y]) && OF [=y] && MFD_S> Selected by [y]: - PINCTRL_ASPEED_G5 [=y] && PINCTRL [=y] && (MACH_ASPEED_G5 [=n] || COMPILE_TEST [=y]) && O> WARNING: unmet direct dependencies detected for PINCTRL_ASPEED Depends on [n]: PINCTRL [=y] && (ARCH_ASPEED [=n] || COMPILE_TEST [=y]) && OF [=y] && MFD_S> Selected by [y]: - PINCTRL_ASPEED_G6 [=y] && PINCTRL [=y] && (MACH_ASPEED_G6 [=n] || COMPILE_TEST [=y]) && O> This is because MACH_ASPEED_G* depend on (ARCH_ASPEED || COMPILE_TEST). ARCH_ASPEED enables the MFD_SYSCON dependency, but COMPILE_TEST doesn't. These unmet dependency bugs were detected by Kismet, a static analysis tool for Kconfig. Please advise if this is not the appropriate solution. Signed-off-by: Julian Braha Reviewed-by: Andrew Jeffery Link: https://lore.kernel.org/r/20211215214022.146391-1-julianbraha@gmail.com Signed-off-by: Linus Walleij

Merge tag 'kbuild-v5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild

2021-09-03T22:33:47Z

Pull Kbuild updates from Masahiro Yamada: - Add -s option (strict mode) to merge_config.sh to make it fail when any symbol is redefined. - Show a warning if a different compiler is used for building external modules. - Infer --target from ARCH for CC=clang to let you cross-compile the kernel without CROSS_COMPILE. - Make the integrated assembler default (LLVM_IAS=1) for CC=clang. - Add to the kernel source instead of borrowing from the compiler. - Add Nick Desaulniers as a Kbuild reviewer. - Drop stale cc-option tests. - Fix the combination of CONFIG_TRIM_UNUSED_KSYMS and CONFIG_LTO_CLANG to handle symbols in inline assembly. - Show a warning if 'FORCE' is missing for if_changed rules. - Various cleanups * tag 'kbuild-v5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (39 commits) kbuild: redo fake deps at include/ksym/*.h kbuild: clean up objtool_args slightly modpost: get the *.mod file path more simply checkkconfigsymbols.py: Fix the '--ignore' option kbuild: merge vmlinux_link() between ARCH=um and other architectures kbuild: do not remove 'linux' link in scripts/link-vmlinux.sh kbuild: merge vmlinux_link() between the ordinary link and Clang LTO kbuild: remove stale *.symversions kbuild: remove unused quiet_cmd_update_lto_symversions gen_compile_commands: extract compiler command from a series of commands x86: remove cc-option-yn test for -mtune= arc: replace cc-option-yn uses with cc-option s390: replace cc-option-yn uses with cc-option ia64: move core-y in arch/ia64/Makefile to arch/ia64/Kbuild sparc: move the install rule to arch/sparc/Makefile security: remove unneeded subdir-$(CONFIG_...) kbuild: sh: remove unused install script kbuild: Fix 'no symbols' warning when CONFIG_TRIM_UNUSD_KSYMS=y kbuild: Switch to 'f' variants of integrated assembler flag kbuild: Shuffle blank line to improve comment meaning ...

isystem: trim/fixup stdarg.h and other headers

2021-08-19T00:02:55Z

Delete/fixup few includes in anticipation of global -isystem compile option removal. Note: crypto/aegis128-neon-inner.c keeps due to redefinition of uintptr_t error (one definition comes from , another from ). Signed-off-by: Alexey Dobriyan Signed-off-by: Masahiro Yamada

pinctrl: aspeed: placate kernel-doc warnings

2021-08-10T13:29:44Z

Eliminate kernel-doc warnings in drivers/pinctrl/aspeed by using proper kernel-doc notation. Fixes these kernel-doc warnings: drivers/pinctrl/aspeed/pinmux-aspeed.c:61: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst * Query the enabled or disabled state for a mux function's signal on a pin drivers/pinctrl/aspeed/pinctrl-aspeed.c:135: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst * Search for the signal expression needed to enable the pin's signal for the Signed-off-by: Randy Dunlap Reported-by: kernel test robot Cc: Aditya Srivastava Cc: Andrew Jeffery Cc: linux-aspeed@lists.ozlabs.org Cc: openbmc@lists.ozlabs.org Cc: Linus Walleij Cc: linux-gpio@vger.kernel.org Acked-by: Andrew Jeffery Link: https://lore.kernel.org/r/20210723034840.8752-1-rdunlap@infradead.org Signed-off-by: Linus Walleij