linux-dev/drivers/pinctrl/samsung, branch master

pinctrl: samsung: Finish initializing the gpios before registering them

2022-08-16T09:23:30Z

As soon as a gpio is registered, it should be usable by a consumer. So, do all the initialization before registering the gpios. Without this change, a consumer can request a GPIO IRQ and have the gpio to IRQ mapping fail. Signed-off-by: Saravana Kannan Reviewed-by: Sam Protsenko Reviewed-by: Chanho Park Tested-by: Chanho Park Signed-off-by: Krzysztof Kozlowski Link: https://lore.kernel.org/r/20220727013349.3056826-1-saravanak@google.com

pinctrl: samsung: do not use bindings header with constants

2022-06-28T13:55:20Z

The Samsung SoC pin controller driver uses only three defines from the bindings header with pin configuration register values, which proves the point that this header is not a proper bindings-type abstraction layer with IDs. Define the needed register values directly in the driver and stop using the bindings header. Signed-off-by: Krzysztof Kozlowski Reviewed-by: Chanho Park Acked-by: Rob Herring Link: https://lore.kernel.org/r/20220605160508.134075-8-krzysztof.kozlowski@linaro.org Link: https://lore.kernel.org/r/20220624081022.32384-1-krzysztof.kozlowski@linaro.org Signed-off-by: Linus Walleij

Merge tag 'gpio-updates-for-v5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux

2022-05-26T21:51:38Z

Pull gpio updates from Bartosz Golaszewski: "We have lots of small changes all over the place, but no huge reworks or new drivers: - use ioread()/iowrite() interfaces instead of raw inb()/outb() in drivers - make irqchips immutable due to the new warning popping up when drivers try to modify the irqchip structures - add new compatibles to dt-bindings for realtek-otto, renesas-rcar and pca95xx - add support for new models to gpio-rcar, gpio-pca953x & gpio-realtek-otto - allow parsing of GPIO hogs represented as children nodes of gpio-uniphier - define a set of common GPIO consumer strings in dt-bindings - shrink code in gpio-ml-ioh by using more devres interfaces - pass arguments to devm_kcalloc() in correct order in gpio-sim - add new helpers for iterating over GPIO firmware nodes and descriptors to gpiolib core and use it in several drivers - drop unused syscon_regmap_lookup_by_compatible() function - correct format specifiers and signedness of variables in GPIO ACPI - drop unneeded error checks in gpio-ftgpio - stop using the deprecated of_gpio.h header in gpio-zevio - drop platform_data support in gpio-max732x - simplify Kconfig dependencies in gpio-vf610 - use raw spinlocks where needed to make PREEMPT_RT happy - fix return values in board files using gpio-pcf857x - convert more drivers to using fwnode instead of of_node - minor fixes and improvements in gpiolib core" * tag 'gpio-updates-for-v5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux: (55 commits) gpio: sifive: Make the irqchip immutable gpio: rcar: Make the irqchip immutable gpio: pcf857x: Make the irqchip immutable gpio: pca953x: Make the irqchip immutable gpio: dwapb: Make the irqchip immutable gpio: sim: Use correct order for the parameters of devm_kcalloc() gpio: ml-ioh: Convert to use managed functions pcim* and devm_* gpio: ftgpio: Remove unneeded ERROR check before clk_disable_unprepare gpio: ws16c48: Utilize iomap interface gpio: gpio-mm: Utilize iomap interface gpio: 104-idio-16: Utilize iomap interface gpio: 104-idi-48: Utilize iomap interface gpio: 104-dio-48e: Utilize iomap interface gpio: zevio: drop of_gpio.h header gpio: max77620: Make the irqchip immutable dt-bindings: gpio: pca95xx: add entry for pca6408 gpio: pca953xx: Add support for pca6408 gpio: max732x: Drop unused support for irq and setup code via platform data gpio: vf610: drop the SOC_VF610 dependency for GPIO_VF610 gpio: syscon: Remove usage of syscon_regmap_lookup_by_compatible ...

pinctrl: samsung: fix missing GPIOLIB on ARM64 Exynos config

2022-04-21T06:58:54Z

The Samsung pinctrl drivers depend on OF_GPIO, which is part of GPIOLIB. ARMv7 Exynos platform selects GPIOLIB and Samsung pinctrl drivers. ARMv8 Exynos selects only the latter leading to possible wrong configuration on ARMv8 build: WARNING: unmet direct dependencies detected for PINCTRL_EXYNOS Depends on [n]: PINCTRL [=y] && OF_GPIO [=n] && (ARCH_EXYNOS [=y] || ARCH_S5PV210 || COMPILE_TEST [=y]) Selected by [y]: - ARCH_EXYNOS [=y] Always select the GPIOLIB from the Samsung pinctrl drivers to fix the issue. This requires removing of OF_GPIO dependency (to avoid recursive dependency), so add dependency on OF for COMPILE_TEST cases. Reported-by: Necip Fazil Yildiran Fixes: eed6b3eb20b9 ("arm64: Split out platform options to separate Kconfig") Cc: Signed-off-by: Krzysztof Kozlowski Reviewed-by: Arnd Bergmann Link: https://lore.kernel.org/r/20220420141407.470955-1-krzysztof.kozlowski@linaro.org

pinctrl: samsung: Switch to use for_each_gpiochip_node() helper

2022-04-14T18:44:58Z

Switch the code to use for_each_gpiochip_node() helper. While at it, in order to avoid additional churn in the future, switch to fwnode APIs where it makes sense. Signed-off-by: Andy Shevchenko Tested-by: Krzysztof Kozlowski

pinctrl: samsung: Drop redundant node parameter in samsung_banks_of_node_get()

2022-04-14T18:44:58Z

The node is taken from the device pointer, which is supplied as a parameter, hence no need to have a separate parameter for node. Drop redundant node parameter in samsung_banks_of_node_get(). While at it, drop "of_" part in the samsung_banks_of_node_get() and samsung_banks_of_node_put() function names to avoid additional churn in the next changes. Signed-off-by: Andy Shevchenko Tested-by: Krzysztof Kozlowski

pinctrl: samsung: staticize fsd_pin_ctrl

2022-04-04T16:58:26Z

struct fsd_pin_ctrl is not used outside of the file, so it can be made static. This fixes sparse warning: drivers/pinctrl/samsung/pinctrl-exynos-arm64.c:773:31: sparse: symbol 'fsd_pin_ctrl' was not declared. Should it be static? Reported-by: kernel test robot Fixes: 0d1b662c374c ("pinctrl: samsung: add FSD SoC specific data") Signed-off-by: Krzysztof Kozlowski Reviewed-by: Alim Akhtar Link: https://lore.kernel.org/r/20220331194526.52444-1-krzysztof.kozlowski@linaro.org

pinctrl: samsung: improve wake irq info on console

2022-02-01T08:13:30Z

Improve the wake irq message by also printing the bank name and hwirq number that matches this irq number. Signed-off-by: Martin Jücker Link: https://lore.kernel.org/r/20220130232122.GA119248@adroid Signed-off-by: Krzysztof Kozlowski

pinctrl: samsung: add FSD SoC specific data

2022-01-25T17:08:57Z

Adds Tesla FSD SoC specific data to enable pinctrl. FSD SoC has similar pinctrl controller as found in the most Samsung/Exynos SoCs. Cc: linux-fsd@tesla.com Acked-by: Linus Walleij Signed-off-by: Ajay Kumar Signed-off-by: Alim Akhtar Link: https://lore.kernel.org/r/20220124141644.71052-13-alim.akhtar@samsung.com Signed-off-by: Krzysztof Kozlowski

pinctrl: samsung: add support for Exynos850 and ExynosAutov9 wake-ups

2022-01-23T11:21:56Z

It seems that newer ARMv8 Exynos SoC like Exynos850 and ExynosAutov9 have differences of their pin controller node capable of external wake-up interrupts: 1. No multiplexed external wake-up interrupt, only direct, 2. More than one pin controller capable of external wake-up interrupts. Add support for dedicated Exynos850 and ExynosAutov9 compatibles. Signed-off-by: Krzysztof Kozlowski Reviewed-by: Sam Protsenko Reviewed-by: Chanho Park Tested-by: Chanho Park Link: https://lore.kernel.org/r/20220111201722.327219-20-krzysztof.kozlowski@canonical.com