linux-dev/drivers/ptp/Kconfig, branch master

ptp: ocp: Select CRC16 in the Kconfig.

2022-07-28T01:11:34Z

The crc16() function is used to check the firmware validity, but the library was not explicitly selected. Fixes: 3c3673bde50c ("ptp: ocp: Add firmware header checks") Reported-by: kernel test robot Signed-off-by: Jonathan Lemon Acked-by: Vadim Fedorenko Link: https://lore.kernel.org/r/20220726220604.1339972-1-jonathan.lemon@gmail.com Signed-off-by: Jakub Kicinski

ptp: ocp: add COMMON_CLK dependency

2021-09-20T10:11:54Z

Without CONFIG_COMMON_CLK, this fails to link: arm-linux-gnueabi-ld: drivers/ptp/ptp_ocp.o: in function `ptp_ocp_register_i2c': ptp_ocp.c:(.text+0xcc0): undefined reference to `__clk_hw_register_fixed_rate' arm-linux-gnueabi-ld: ptp_ocp.c:(.text+0xcf4): undefined reference to `devm_clk_hw_register_clkdev' arm-linux-gnueabi-ld: drivers/ptp/ptp_ocp.o: in function `ptp_ocp_detach': ptp_ocp.c:(.text+0x1c24): undefined reference to `clk_hw_unregister_fixed_rate' Fixes: a7e1abad13f3 ("ptp: Add clock driver for the OpenCompute TimeCard.") Signed-off-by: Arnd Bergmann Signed-off-by: David S. Miller

ptp: ocp: Simplify Kconfig.

2021-08-26T11:06:42Z

Remove the 'imply' statements, these apparently are not doing what I expected. Platform modules which are used by the driver still need to be enabled in the overall config for them to be used, but there isn't a hard dependency on them. Use 'depend' for selectable modules which provide functions used directly by the driver. Signed-off-by: Jonathan Lemon Reviewed-by: Arnd Bergmann Reviewed-by: Randy Dunlap Signed-off-by: David S. Miller

Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net

2021-08-20T01:09:18Z

drivers/ptp/Kconfig: 55c8fca1dae1 ("ptp_pch: Restore dependency on PCI") e5f31552674e ("ethernet: fix PTP_1588_CLOCK dependencies") Signed-off-by: Jakub Kicinski

ptp: ocp: Have Kconfig select NET_DEVLINK

2021-08-17T00:18:43Z

NET doesn't imply NET_DEVLINK. Select this separately, so that random config combinations don't complain. Reported-by: kernel test robot Fixes: 773bda964921 ("ptp: ocp: Expose various resources on the timecard.") Signed-off-by: Jonathan Lemon Signed-off-by: Jakub Kicinski

ptp: ocp: don't allow on S390

2021-08-16T10:13:29Z

Fix kconfig warning on arch/s390/: WARNING: unmet direct dependencies detected for SERIAL_8250 Depends on [n]: TTY [=y] && HAS_IOMEM [=y] && !S390 [=y] Selected by [m]: - PTP_1588_CLOCK_OCP [=m] && PTP_1588_CLOCK [=m] && HAS_IOMEM [=y] && PCI [=y] && SPI [=y] && I2C [=m] && MTD [=m] Signed-off-by: Randy Dunlap Cc: Richard Cochran Cc: Jonathan Lemon Signed-off-by: David S. Miller

ptp_pch: Restore dependency on PCI

2021-08-16T10:11:06Z

During the swap dependency on PCH_GBE to selection PTP_1588_CLOCK_PCH incidentally dropped the implicit dependency on the PCI. Restore it. Fixes: 18d359ceb044 ("pch_gbe, ptp_pch: Fix the dependency direction between these drivers") Reported-by: kernel test robot Signed-off-by: Andy Shevchenko Signed-off-by: David S. Miller

ethernet: fix PTP_1588_CLOCK dependencies

2021-08-14T00:49:05Z

The 'imply' keyword does not do what most people think it does, it only politely asks Kconfig to turn on another symbol, but does not prevent it from being disabled manually or built as a loadable module when the user is built-in. In the ICE driver, the latter now causes a link failure: aarch64-linux-ld: drivers/net/ethernet/intel/ice/ice_main.o: in function `ice_eth_ioctl': ice_main.c:(.text+0x13b0): undefined reference to `ice_ptp_get_ts_config' ice_main.c:(.text+0x13b0): relocation truncated to fit: R_AARCH64_CALL26 against undefined symbol `ice_ptp_get_ts_config' aarch64-linux-ld: ice_main.c:(.text+0x13bc): undefined reference to `ice_ptp_set_ts_config' ice_main.c:(.text+0x13bc): relocation truncated to fit: R_AARCH64_CALL26 against undefined symbol `ice_ptp_set_ts_config' aarch64-linux-ld: drivers/net/ethernet/intel/ice/ice_main.o: in function `ice_prepare_for_reset': ice_main.c:(.text+0x31fc): undefined reference to `ice_ptp_release' ice_main.c:(.text+0x31fc): relocation truncated to fit: R_AARCH64_CALL26 against undefined symbol `ice_ptp_release' aarch64-linux-ld: drivers/net/ethernet/intel/ice/ice_main.o: in function `ice_rebuild': This is a recurring problem in many drivers, and we have discussed it several times befores, without reaching a consensus. I'm providing a link to the previous email thread for reference, which discusses some related problems. To solve the dependency issue better than the 'imply' keyword, introduce a separate Kconfig symbol "CONFIG_PTP_1588_CLOCK_OPTIONAL" that any driver can depend on if it is able to use PTP support when available, but works fine without it. Whenever CONFIG_PTP_1588_CLOCK=m, those drivers are then prevented from being built-in, the same way as with a 'depends on PTP_1588_CLOCK || !PTP_1588_CLOCK' dependency that does the same trick, but that can be rather confusing when you first see it. Since this should cover the dependencies correctly, the IS_REACHABLE() hack in the header is no longer needed now, and can be turned back into a normal IS_ENABLED() check. Any driver that gets the dependency wrong will now cause a link time failure rather than being unable to use PTP support when that is in a loadable module. However, the two recently added ptp_get_vclocks_index() and ptp_convert_timestamp() interfaces are only called from builtin code with ethtool and socket timestamps, so keep the current behavior by stubbing those out completely when PTP is in a loadable module. This should be addressed properly in a follow-up. As Richard suggested, we may want to actually turn PTP support into a 'bool' option later on, preventing it from being a loadable module altogether, which would be one way to solve the problem with the ethtool interface. Fixes: 06c16d89d2cb ("ice: register 1588 PTP clock device object for E810 devices") Link: https://lore.kernel.org/netdev/20210804121318.337276-1-arnd@kernel.org/ Link: https://lore.kernel.org/netdev/CAK8P3a06enZOf=XyZ+zcAwBczv41UuCTz+=0FMf2gBz1_cOnZQ@mail.gmail.com/ Link: https://lore.kernel.org/netdev/CAK8P3a3=eOxE-K25754+fB_-i_0BZzf9a9RfPTX3ppSwu9WZXw@mail.gmail.com/ Link: https://lore.kernel.org/netdev/20210726084540.3282344-1-arnd@kernel.org/ Acked-by: Shannon Nelson Acked-by: Jacob Keller Acked-by: Richard Cochran Reviewed-by: Vladimir Oltean Signed-off-by: Arnd Bergmann Link: https://lore.kernel.org/r/20210812183509.1362782-1-arnd@kernel.org Signed-off-by: Jakub Kicinski

ptp: ocp: Expose various resources on the timecard.

2021-08-04T11:52:50Z

The OpenCompute timecard driver has additional functionality besides a clock. Make the following resources available: - The external timestamp channels (ts0/ts1) - devlink support for flashing and health reporting - GPS and MAC serial ports - board serial number (obtained from i2c device) Also add watchdog functionality for when GNSS goes into holdover. The resources are collected under a timecard class directory: [jlemon@timecard ~]$ ls -g /sys/class/timecard/ocp1/ total 0 -r--r--r--. 1 root 4096 Aug 3 19:49 available_clock_sources -rw-r--r--. 1 root 4096 Aug 3 19:49 clock_source lrwxrwxrwx. 1 root 0 Aug 3 19:49 device -> ../../../0000:04:00.0/ -r--r--r--. 1 root 4096 Aug 3 19:49 gps_sync lrwxrwxrwx. 1 root 0 Aug 3 19:49 i2c -> ../../xiic-i2c.1024/i2c-2/ drwxr-xr-x. 2 root 0 Aug 3 19:49 power/ lrwxrwxrwx. 1 root 0 Aug 3 19:49 pps -> ../../../../../virtual/pps/pps1/ lrwxrwxrwx. 1 root 0 Aug 3 19:49 ptp -> ../../ptp/ptp2/ -r--r--r--. 1 root 4096 Aug 3 19:49 serialnum lrwxrwxrwx. 1 root 0 Aug 3 19:49 subsystem -> ../../../../../../class/timecard/ lrwxrwxrwx. 1 root 0 Aug 3 19:49 ttyGPS -> ../../tty/ttyS7/ lrwxrwxrwx. 1 root 0 Aug 3 19:49 ttyMAC -> ../../tty/ttyS8/ -rw-r--r--. 1 root 4096 Aug 3 19:39 uevent The labeling is needed at the minimum, in order to tell the serial devices apart. Signed-off-by: Jonathan Lemon Signed-off-by: David S. Miller

ptp: arm/arm64: Enable ptp_kvm for arm/arm64

2021-04-07T15:33:20Z

Currently, there is no mechanism to keep time sync between guest and host in arm/arm64 virtualization environment. Time in guest will drift compared with host after boot up as they may both use third party time sources to correct their time respectively. The time deviation will be in order of milliseconds. But in some scenarios,like in cloud environment, we ask for higher time precision. kvm ptp clock, which chooses the host clock source as a reference clock to sync time between guest and host, has been adopted by x86 which takes the time sync order from milliseconds to nanoseconds. This patch enables kvm ptp clock for arm/arm64 and improves clock sync precision significantly. Test result comparisons between with kvm ptp clock and without it in arm/arm64 are as follows. This test derived from the result of command 'chronyc sources'. we should take more care of the last sample column which shows the offset between the local clock and the source at the last measurement. no kvm ptp in guest: MS Name/IP address Stratum Poll Reach LastRx Last sample ======================================================================== ^* dns1.synet.edu.cn 2 6 377 13 +1040us[+1581us] +/- 21ms ^* dns1.synet.edu.cn 2 6 377 21 +1040us[+1581us] +/- 21ms ^* dns1.synet.edu.cn 2 6 377 29 +1040us[+1581us] +/- 21ms ^* dns1.synet.edu.cn 2 6 377 37 +1040us[+1581us] +/- 21ms ^* dns1.synet.edu.cn 2 6 377 45 +1040us[+1581us] +/- 21ms ^* dns1.synet.edu.cn 2 6 377 53 +1040us[+1581us] +/- 21ms ^* dns1.synet.edu.cn 2 6 377 61 +1040us[+1581us] +/- 21ms ^* dns1.synet.edu.cn 2 6 377 4 -130us[ +796us] +/- 21ms ^* dns1.synet.edu.cn 2 6 377 12 -130us[ +796us] +/- 21ms ^* dns1.synet.edu.cn 2 6 377 20 -130us[ +796us] +/- 21ms in host: MS Name/IP address Stratum Poll Reach LastRx Last sample ======================================================================== ^* 120.25.115.20 2 7 377 72 -470us[ -603us] +/- 18ms ^* 120.25.115.20 2 7 377 92 -470us[ -603us] +/- 18ms ^* 120.25.115.20 2 7 377 112 -470us[ -603us] +/- 18ms ^* 120.25.115.20 2 7 377 2 +872ns[-6808ns] +/- 17ms ^* 120.25.115.20 2 7 377 22 +872ns[-6808ns] +/- 17ms ^* 120.25.115.20 2 7 377 43 +872ns[-6808ns] +/- 17ms ^* 120.25.115.20 2 7 377 63 +872ns[-6808ns] +/- 17ms ^* 120.25.115.20 2 7 377 83 +872ns[-6808ns] +/- 17ms ^* 120.25.115.20 2 7 377 103 +872ns[-6808ns] +/- 17ms ^* 120.25.115.20 2 7 377 123 +872ns[-6808ns] +/- 17ms The dns1.synet.edu.cn is the network reference clock for guest and 120.25.115.20 is the network reference clock for host. we can't get the clock error between guest and host directly, but a roughly estimated value will be in order of hundreds of us to ms. with kvm ptp in guest: chrony has been disabled in host to remove the disturb by network clock. MS Name/IP address Stratum Poll Reach LastRx Last sample ======================================================================== * PHC0 0 3 377 8 -7ns[ +1ns] +/- 3ns * PHC0 0 3 377 8 +1ns[ +16ns] +/- 3ns * PHC0 0 3 377 6 -4ns[ -0ns] +/- 6ns * PHC0 0 3 377 6 -8ns[ -12ns] +/- 5ns * PHC0 0 3 377 5 +2ns[ +4ns] +/- 4ns * PHC0 0 3 377 13 +2ns[ +4ns] +/- 4ns * PHC0 0 3 377 12 -4ns[ -6ns] +/- 4ns * PHC0 0 3 377 11 -8ns[ -11ns] +/- 6ns * PHC0 0 3 377 10 -14ns[ -20ns] +/- 4ns * PHC0 0 3 377 8 +4ns[ +5ns] +/- 4ns The PHC0 is the ptp clock which choose the host clock as its source clock. So we can see that the clock difference between host and guest is in order of ns. Cc: Mark Rutland Acked-by: Richard Cochran Signed-off-by: Jianyong Wu Signed-off-by: Marc Zyngier Link: https://lore.kernel.org/r/20201209060932.212364-8-jianyong.wu@arm.com