linux-dev/drivers/s390/block, branch master

Merge tag 's390-6.1-1' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux

2022-10-09T20:51:40Z

Pull s390 updates from Vasily Gorbik: - Make use of the IBM z16 processor activity instrumentation facility extension to count neural network processor assist operations: add a new PMU device driver so that perf can make use of this. - Rework memcpy_real() to avoid DAT-off mode. - Rework absolute lowcore access code. - Various small fixes and improvements all over the code. * tag 's390-6.1-1' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: s390/pci: remove unused bus_next field from struct zpci_dev s390/cio: remove unused ccw_device_force_console() declaration s390/pai: Add support for PAI Extension 1 NNPA counters s390/mm: fix no previous prototype warnings in maccess.c s390/mm: uninline copy_oldmem_kernel() function s390/mm,ptdump: add real memory copy page markers s390/mm: rework memcpy_real() to avoid DAT-off mode s390/dump: save IPL CPU registers once DAT is available s390/pci: convert high_memory to physical address s390/smp,ptdump: add absolute lowcore markers s390/smp: rework absolute lowcore access s390/smp: call smp_reinit_ipl_cpu() before scheduler is available s390/ptdump: add missing amode31 markers s390/mm: split lowcore pages with set_memory_4k() s390/mm: remove unused access parameter from do_fault_error() s390/delay: sync comment within __delay() with reality s390: move from strlcpy with unused retval to strscpy

Merge tag 'for-6.1/block-2022-10-03' of git://git.kernel.dk/linux

2022-10-07T16:19:14Z

Pull block updates from Jens Axboe: - NVMe pull requests via Christoph: - handle number of queue changes in the TCP and RDMA drivers (Daniel Wagner) - allow changing the number of queues in nvmet (Daniel Wagner) - also consider host_iface when checking ip options (Daniel Wagner) - don't map pages which can't come from HIGHMEM (Fabio M. De Francesco) - avoid unnecessary flush bios in nvmet (Guixin Liu) - shrink and better pack the nvme_iod structure (Keith Busch) - add comment for unaligned "fake" nqn (Linjun Bao) - print actual source IP address through sysfs "address" attr (Martin Belanger) - various cleanups (Jackie Liu, Wolfram Sang, Genjian Zhang) - handle effects after freeing the request (Keith Busch) - copy firmware_rev on each init (Keith Busch) - restrict management ioctls to admin (Keith Busch) - ensure subsystem reset is single threaded (Keith Busch) - report the actual number of tagset maps in nvme-pci (Keith Busch) - small fabrics authentication fixups (Christoph Hellwig) - add common code for tagset allocation and freeing (Christoph Hellwig) - stop using the request_queue in nvmet (Christoph Hellwig) - set min_align_mask before calculating max_hw_sectors (Rishabh Bhatnagar) - send a rediscover uevent when a persistent discovery controller reconnects (Sagi Grimberg) - misc nvmet-tcp fixes (Varun Prakash, zhenwei pi) - MD pull request via Song: - Various raid5 fix and clean up, by Logan Gunthorpe and David Sloan. - Raid10 performance optimization, by Yu Kuai. - sbitmap wakeup hang fixes (Hugh, Keith, Jan, Yu) - IO scheduler switching quisce fix (Keith) - s390/dasd block driver updates (Stefan) - support for recovery for the ublk driver (ZiyangZhang) - rnbd drivers fixes and updates (Guoqing, Santosh, ye, Christoph) - blk-mq and null_blk map fixes (Bart) - various bcache fixes (Coly, Jilin, Jules) - nbd signal hang fix (Shigeru) - block writeback throttling fix (Yu) - optimize the passthrough mapping handling (me) - prepare block cgroups to being gendisk based (Christoph) - get rid of an old PSI hack in the block layer, moving it to the callers instead where it belongs (Christoph) - blk-throttle fixes and cleanups (Yu) - misc fixes and cleanups (Liu Shixin, Liu Song, Miaohe, Pankaj, Ping-Xiang, Wolfram, Saurabh, Li Jinlin, Li Lei, Lin, Li zeming, Miaohe, Bart, Coly, Gaosheng * tag 'for-6.1/block-2022-10-03' of git://git.kernel.dk/linux: (162 commits) sbitmap: fix lockup while swapping block: add rationale for not using blk_mq_plug() when applicable block: adapt blk_mq_plug() to not plug for writes that require a zone lock s390/dasd: use blk_mq_alloc_disk blk-cgroup: don't update the blkg lookup hint in blkg_conf_prep nvmet: don't look at the request_queue in nvmet_bdev_set_limits nvmet: don't look at the request_queue in nvmet_bdev_zone_mgmt_emulate_all blk-mq: use quiesced elevator switch when reinitializing queues block: replace blk_queue_nowait with bdev_nowait nvme: remove nvme_ctrl_init_connect_q nvme-loop: use the tagset alloc/free helpers nvme-loop: store the generic nvme_ctrl in set->driver_data nvme-loop: initialize sqsize later nvme-fc: use the tagset alloc/free helpers nvme-fc: store the generic nvme_ctrl in set->driver_data nvme-fc: keep ctrl->sqsize in sync with opts->queue_size nvme-rdma: use the tagset alloc/free helpers nvme-rdma: store the generic nvme_ctrl in set->driver_data nvme-tcp: use the tagset alloc/free helpers nvme-tcp: store the generic nvme_ctrl in set->driver_data ...

s390/dasd: use blk_mq_alloc_disk

2022-09-28T14:56:34Z

As far as I can tell there is no need for the staged setup in dasd, so allocate the tagset and the disk with the queue in dasd_gendisk_alloc. Signed-off-by: Christoph Hellwig Reviewed-by: Stefan Haberland Signed-off-by: Stefan Haberland Link: https://lore.kernel.org/r/20220928143945.1687114-2-sth@linux.ibm.com Signed-off-by: Jens Axboe

s390/dasd: add device ping attribute

2022-09-21T14:32:51Z

Add a function to check if a device is accessible. This makes mostly sense for copy pair secondary devices but it will work for all devices. The sysfs attribute ping is a write only attribute and will issue a NOP CCW to the device. In case of success it will return zero. If the device is not accessible it will return an error code. Signed-off-by: Stefan Haberland Reviewed-by: Jan Hoeppner Link: https://lore.kernel.org/r/20220920192616.808070-8-sth@linux.ibm.com Signed-off-by: Jens Axboe

s390/dasd: suppress generic error messages for PPRC secondary devices

2022-09-21T14:32:51Z

Suppress generic command reject messages and dump of sense data for Peer-To-Peer-Remote-Copy (PPRC) secondary errors. If IO is issued on a PPRC secondary device, a specific error message is printed instead. Signed-off-by: Stefan Haberland Reviewed-by: Jan Hoeppner Link: https://lore.kernel.org/r/20220920192616.808070-7-sth@linux.ibm.com Signed-off-by: Jens Axboe

s390/dasd: add ioctl to perform a swap of the drivers copy pair

2022-09-21T14:32:51Z

The newly defined ioctl BIODASDCOPYPAIRSWAP takes a structure that specifies a copy pair that should be swapped. It will call the device discipline function to perform the swap operation. The structure looks as followed: struct dasd_copypair_swap_data_t { char primary[20]; char secondary[20]; __u8 reserved[64]; }; where primary is the old primary device that will be replaced by the secondary device. The old primary will become a secondary device afterwards. Signed-off-by: Stefan Haberland Reviewed-by: Jan Hoeppner Link: https://lore.kernel.org/r/20220920192616.808070-6-sth@linux.ibm.com Signed-off-by: Jens Axboe

s390/dasd: add copy pair swap capability

2022-09-21T14:32:51Z

In case of errors or misbehaviour of the primary device a controlled failover to one of the configured secondary devices needs to be performed. The swap processing stops I/O on the primary device, all requests are re-queued to the blocklayer queue, the entries in the copy relation are swapped and finally the link to the blockdevice is moved from primary to secondary dasd device. After this, the secondary becomes the new primary device and I/O is restarted on that device. Signed-off-by: Stefan Haberland Reviewed-by: Jan Hoeppner Link: https://lore.kernel.org/r/20220920192616.808070-5-sth@linux.ibm.com Signed-off-by: Jens Axboe

s390/dasd: add copy pair setup

2022-09-21T14:32:51Z

A copy relation that is configured on the storage server side needs to be enabled separately in the device driver. A sysfs interface is created that allows userspace tooling to control such setup. The following sysfs entries are added to store and read copy relation information: copy_pair - Add/Delete a copy pair relation to the DASD device driver - Query all previously added copy pair relations copy_role - Query the copy pair role of the device To add a copy pair to the DASD device driver it has to be specified through the sysfs attribute copy_pair. Only one secondary device can be specified at a time together with the primary device. Both, secondary and primary can be used equally to define the copy pair. The secondary devices have to be offline when adding the copy relation. The primary device needs to be specified first followed by the comma separated secondary device. Read from the copy_pair attribute to get the current setup and write "clear" to the attribute to delete any existing setup. Example: $ echo 0.0.9700,0.0.9740 > /sys/bus/ccw/devices/0.0.9700/copy_pair $ cat /sys/bus/ccw/devices/0.0.9700/copy_pair 0.0.9700,0.0.9740 During device online processing the required data will be read from the storage server and the information will be compared to the setup requested through the copy_pair attribute. The registration of the primary and secondary device will be handled accordingly. A blockdevice is only allocated for copy relation primary devices. To query the copy role of a device read from the copy_role sysfs attribute. Possible values are primary, secondary, and none. Example: $ cat /sys/bus/ccw/devices/0.0.9700/copy_role primary Signed-off-by: Stefan Haberland Reviewed-by: Jan Hoeppner Link: https://lore.kernel.org/r/20220920192616.808070-4-sth@linux.ibm.com Signed-off-by: Jens Axboe

s390/dasd: add query PPRC function

2022-09-21T14:32:50Z

Add function to query the Peer-to-Peer-Remote-Copy (PPRC) state of a device by reading the related structure through a read subsystem data call. Signed-off-by: Stefan Haberland Reviewed-by: Jan Hoeppner Link: https://lore.kernel.org/r/20220920192616.808070-3-sth@linux.ibm.com Signed-off-by: Jens Axboe

s390/dasd: put block allocation in separate function

2022-09-21T14:32:50Z

Put block allocation into a separate function to put some copy pair logic in it in a later patch. Signed-off-by: Stefan Haberland Reviewed-by: Jan Hoeppner Link: https://lore.kernel.org/r/20220920192616.808070-2-sth@linux.ibm.com Signed-off-by: Jens Axboe