s390/cio: add basic protected virtualization support

2019-06-15T10:25:00Z

As virtio-ccw devices are channel devices, we need to use the dma area within the common I/O layer for any communication with the hypervisor. Note that we do not need to use that area for control blocks directly referenced by instructions, e.g. the orb. It handles neither QDIO in the common code, nor any device type specific stuff (like channel programs constructed by the DASD driver). An interesting side effect is that virtio structures are now going to get allocated in 31 bit addressable storage. Signed-off-by: Halil Pasic Reviewed-by: Sebastian Ott Reviewed-by: Cornelia Huck Reviewed-by: Michael Mueller Tested-by: Michael Mueller Signed-off-by: Heiko Carstens

License cleanup: add SPDX GPL-2.0 license identifier to files with no license

2017-11-02T10:10:55Z

Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart Reviewed-by: Philippe Ombredanne Reviewed-by: Thomas Gleixner Signed-off-by: Greg Kroah-Hartman

s390: Use pr_warn instead of pr_warning

2016-03-07T12:12:04Z

Convert the uses of pr_warning to pr_warn so there are fewer uses of the old pr_warning. Miscellanea: o Align arguments o Coalesce formats Signed-off-by: Joe Perches Signed-off-by: Heiko Carstens Signed-off-by: Martin Schwidefsky

s390: cio driver &__get_cpu_var replacements

2014-08-26T17:45:52Z

Use this_cpu_ptr() instead of &__get_cpu_var() Signed-off-by: Christoph Lameter Signed-off-by: Tejun Heo

s390/lowcore: replace lowcore irb array with a per-cpu variable

2014-05-28T08:39:16Z

Remove the 96-byte irb array from the lowcore and create a per-cpu variable instead. That way we will pick up any change in the definition of the struct irb automatically. Acked-By: Sebastian Ott Signed-off-by: Martin Schwidefsky

s390/cio: remove weird assignment during argument evaluation

2014-05-27T08:26:03Z

Get rid of a useless assignment during argument evaluation. No functional change. Signed-off-by: Sebastian Ott Signed-off-by: Martin Schwidefsky

[S390] cio: add message for timeouts on internal I/O

2011-10-30T14:16:41Z

Print a message in case we do not receive an IRQ in time (for internal I/O). Also print the ID of the last used channel path, since it is possible that not the device itself but this specific path might have a defect. Signed-off-by: Sebastian Ott Signed-off-by: Heiko Carstens Signed-off-by: Martin Schwidefsky

[S390] ccwreq: add ability to use all paths

2010-08-09T16:12:54Z

Change the ccwrequest infrastructure to use more than one channel path per start I/O. A flag "singlepath" is added to struct ccw_request - if set, the old behavior is used. This flag is set for all exploiters of the ccwrequest infrastructure - so there is no functional change through this patch. Signed-off-by: Sebastian Ott Signed-off-by: Martin Schwidefsky

[S390] cio: Log the response from the unit check handler

2010-08-09T16:12:53Z

Log the response from the unit check handler which triggers further cio internal i/o processing. Signed-off-by: Michael Ernst Signed-off-by: Martin Schwidefsky

[S390] cio: unit check handling during internal I/O

2010-05-26T21:27:09Z

Send unit checks that occur during internal I/O to the device driver and react according to its return code. Signed-off-by: Michael Ernst Signed-off-by: Martin Schwidefsky

linux-dev/drivers/s390/cio/ccwreq.c, branch linus/master