linux-dev/drivers/s390/cio/chsc.c, branch linus/master

s390/stp: clock_delta should be signed

2022-05-11T12:40:57Z

clock_delta is declared as unsigned long in various places. However, the clock sync delta can be negative. This would add a huge positive offset in clock_sync_global where clock_delta is added to clk.eitod which is a 72 bit integer. Declare it as signed long to fix this. Cc: stable@vger.kernel.org Signed-off-by: Sven Schnelle Reviewed-by: Heiko Carstens Signed-off-by: Heiko Carstens

s390/cio: dont call css_wait_for_slow_path() inside a lock

2021-06-18T14:41:19Z

Currently css_wait_for_slow_path() gets called inside the chp->lock. The path-verification-loop of slowpath inside this lock could lead to deadlock as reported by the lockdep validator. The ccw_device_get_chp_desc() during the instance of a device-set-online would try to acquire the same 'chp->lock' to read the chp->desc. The instance of this function can get called from multiple scenario, like probing or setting-device online manually. This could, in some corner-cases lead to the deadlock. lockdep validator reported this as, CPU0 CPU1 ---- ---- lock(&chp->lock); lock(kn->active#43); lock(&chp->lock); lock((wq_completion)cio); The chp->lock was introduced to serialize the access of struct channel_path. This lock is not needed for the css_wait_for_slow_path() function, so invoke the slow-path function outside this lock. Fixes: b730f3a93395 ("[S390] cio: add lock to struct channel_path") Cc: Reviewed-by: Peter Oberparleiter Signed-off-by: Vineeth Vijayan Signed-off-by: Vasily Gorbik

s390/cio: Add support for FCES status notification

2020-11-16T15:14:38Z

Fibre Channel Endpoint-Security event is received as an sei:nt0 type in the CIO layer. This information needs to be shared with the CCW device drivers using the path_events callback. Co-developed-by: Sebastian Ott Signed-off-by: Vineeth Vijayan Signed-off-by: Sebastian Ott Signed-off-by: Stefan Haberland Reviewed-by: Peter Oberparleiter Acked-by: Vasily Gorbik Signed-off-by: Jens Axboe

s390/cio: Provide Endpoint-Security Mode per CU

2020-11-16T15:14:37Z

Add an interface in the CIO layer to retrieve the information about the Endpoint-Security Mode (ESM) of the specified CU. The ESM values are defined as 0-None, 1-Authenticated or 2, 3-Encrypted. [vneethv@linux.ibm.com: cleaned-up and modified description] Signed-off-by: Sebastian Ott Signed-off-by: Vineeth Vijayan Signed-off-by: Stefan Haberland Reviewed-by: Peter Oberparleiter Acked-by: Vasily Gorbik Acked-by: Cornelia Huck Signed-off-by: Jens Axboe

Merge tag 's390-5.10-1' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux

2020-10-16T19:36:38Z

Pull s390 updates from Vasily Gorbik: - Remove address space overrides using set_fs() - Convert to generic vDSO - Convert to generic page table dumper - Add ARCH_HAS_DEBUG_WX support - Add leap seconds handling support - Add NVMe firmware-assisted kernel dump support - Extend NVMe boot support with memory clearing control and addition of kernel parameters - AP bus and zcrypt api code rework. Add adapter configure/deconfigure interface. Extend debug features. Add failure injection support - Add ECC secure private keys support - Add KASan support for running protected virtualization host with 4-level paging - Utilize destroy page ultravisor call to speed up secure guests shutdown - Implement ioremap_wc() and ioremap_prot() with MIO in PCI code - Various checksum improvements - Other small various fixes and improvements all over the code * tag 's390-5.10-1' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: (85 commits) s390/uaccess: fix indentation s390/uaccess: add default cases for __put_user_fn()/__get_user_fn() s390/zcrypt: fix wrong format specifications s390/kprobes: move insn_page to text segment s390/sie: fix typo in SIGP code description s390/lib: fix kernel doc for memcmp() s390/zcrypt: Introduce Failure Injection feature s390/zcrypt: move ap_msg param one level up the call chain s390/ap/zcrypt: revisit ap and zcrypt error handling s390/ap: Support AP card SCLP config and deconfig operations s390/sclp: Add support for SCLP AP adapter config/deconfig s390/ap: add card/queue deconfig state s390/ap: add error response code field for ap queue devices s390/ap: split ap queue state machine state from device state s390/zcrypt: New config switch CONFIG_ZCRYPT_DEBUG s390/zcrypt: introduce msg tracking in zcrypt functions s390/startup: correct early pgm check info formatting s390: remove orphaned extern variables declarations s390/kasan: make sure int handler always run with DAT on s390/ipl: add support to control memory clearing for nvme re-IPL ...

s390/stp: add support for leap seconds

2020-09-26T13:51:21Z

In the current implementation, leap seconds are only synchronized during the bootup process when the STP clock is synced. If the Leap second offset (LSO) changes the machine must be rebooted, which is not desired. This patch adds the required code to handle Leap second changes during runtime. If the Leap second changes, a Configuration change machine check is triggered. The STP code than schedules a Leap second insertion/deletion with do_adjtimex(). Signed-off-by: Sven Schnelle Reviewed-by: Alexander Egorenkov Signed-off-by: Vasily Gorbik

s390/cio: Helper functions to read CSSID, IID, and CHID

2020-09-15T20:21:46Z

Add helper functions to expose Channel Subsystem ID (CSSID), MIF Image Id (IID), Channel ID (CHID) and Channel Path ID (CHPID). These values are required by the qeth driver's exploitation of network- address-change-notifications to determine which entries belong to this interface. Store the Partition identifier in System log, as this may be used to map a Linux view to a Hardware view for debugging purpose. Signed-off-by: Alexandra Winter Reviewed-by: Vineeth Vijayan Signed-off-by: Julian Wiedmann Acked-by: Heiko Carstens Signed-off-by: David S. Miller

s390/cio: Add new Operation Code OC3 to PNSO

2020-09-15T20:21:46Z

Add support for operation code 3 (OC3) of the Perform-Network-Subchannel-Operations (PNSO) function of the Channel-Subsystem-Call (CHSC) instruction. PNSO provides 2 operation codes: OC0 - BRIDGE_INFO OC3 - ADDR_INFO (new) Extend the function calls to *pnso* to pass the OC and add new response code 0108. Support for OC3 is indicated by a flag in the css_general_characteristics. Signed-off-by: Alexandra Winter Reviewed-by: Julian Wiedmann Reviewed-by: Peter Oberparleiter Reviewed-by: Vineeth Vijayan Signed-off-by: Julian Wiedmann Acked-by: Heiko Carstens Signed-off-by: David S. Miller

s390/cio, s390/qeth: cleanup PNSO CHSC

2020-05-28T10:21:55Z

CHSC3D (PNSO - perform network subchannel operation) is used for OC0 (Store-network-bridging-information) as well as for OC3 (Store-network-address-information). So common fields are renamed from *brinfo* to *pnso*. Also *_bridge_host_* is changed into *_addr_change_*, e.g. qeth_bridge_host_event to qeth_addr_change_event, for the same reasons. The keywords in the card traces are changed accordingly. Remove unused L3 types, as PNSO will only return Layer2 entries. Make PNSO CHSC implementation more consistent with existing API usage: Add new function ccw_device_pnso() to drivers/s390/cio/device_ops.c and the function declaration to arch/s390/include/asm/ccwdev.h, which takes a struct ccw_device * as parameter instead of schid and calls chsc_pnso(). PNSO CHSC has no strict relationship to qdio. So move the calling function from qdio to qeth_l2 and move the necessary structures to a new file arch/s390/include/asm/chsc.h. Do response code evaluation only in chsc_error_from_response() and use return code in all other places. qeth_anset_makerc() was meant to evaluate the PNSO response code, but never did, because pnso_rc was already non-zero. Indentation was corrected in some places. Signed-off-by: Alexandra Winter Reviewed-by: Peter Oberparleiter Reviewed-by: Vineeth Vijayan Reviewed-by: Julian Wiedmann Signed-off-by: Vasily Gorbik

s390/qdio: pass ISC as parameter to chsc_sadc()

2020-03-23T12:41:55Z

When issuing a SADC for a QDIO device, don't hardcode the ISC but use whatever is specified in qdio's handler for Adapter Interrupts. Signed-off-by: Julian Wiedmann Reviewed-by: Benjamin Block Signed-off-by: Vasily Gorbik