linux-dev/drivers/s390/cio/device.h, branch linus/master

s390/cio: remove pm support from ccw bus driver

2020-12-02T17:19:25Z

As part of removing broken pm-support from s390 arch, remove the pm callbacks from ccw-bus driver.The power-management functions are unused since the 'commit 394216275c7d ("s390: remove broken hibernate / power management support")'. Signed-off-by: Vineeth Vijayan Reviewed-by: Peter Oberparleiter Signed-off-by: Heiko Carstens

s390: remove orphaned function declarations

2020-09-30T10:09:54Z

arch/s390/pci/pci_bus.h: zpci_bus_init - only declaration left after commit 05bc1be6db4b ("s390/pci: create zPCI bus") arch/s390/include/asm/gmap.h: gmap_pte_notify - only declaration left after commit 4be130a08420 ("s390/mm: add shadow gmap support") arch/s390/include/asm/pgalloc.h: rcu_table_freelist_finish - only declaration left after commit 36409f6353fc ("[S390] use generic RCU page-table freeing code") arch/s390/include/asm/tlbflush.h: smp_ptlb_all - only declaration left after commit 5a79859ae0f3 ("s390: remove 31 bit support") arch/s390/include/asm/vtimer.h: init_cpu_vtimer - only declaration left after commit b5f87f15e200 ("s390/idle: consolidate idle functions and definitions") arch/s390/include/asm/pci.h: zpci_debug_info - only declaration left after commit 386aa051fb4b ("s390/pci: remove per device debug attribute") arch/s390/include/asm/vdso.h: vdso_alloc_boot_cpu - only declaration left after commit 4bff8cb54502 ("s390: convert to GENERIC_VDSO") arch/s390/include/asm/smp.h: smp_vcpu_scheduled - only declaration left after commit 67626fadd269 ("s390: enforce CONFIG_SMP") arch/s390/kernel/entry.h: restart_call_handler - only declaration left after commit 8b646bd75908 ("[S390] rework smp code") arch/s390/kernel/entry.h: startup_init_nobss - only declaration left after commit 2e83e0eb85ca ("s390: clean .bss before running uncompressed kernel") arch/s390/kernel/entry.h: s390_early_resume - only declaration left after commit 394216275c7d ("s390: remove broken hibernate / power management support") drivers/s390/char/raw3270.h: raw3270_request_alloc_bootmem - only declaration left after commit 33403dcfcdfd ("[S390] 3270 console: convert from bootmem to slab") drivers/s390/cio/device.h: ccw_device_schedule_sch_unregister - only declaration left after commit 37de53bb5290 ("[S390] cio: introduce ccw device todos") drivers/s390/char/tape.h: tape_hotplug_event - has only declaration since recorded git history. drivers/s390/char/tape.h: tape_oper_handler - has only declaration since recorded git history. drivers/s390/char/tape.h: tape_noper_handler - has only declaration since recorded git history. drivers/s390/char/tape_std.h: tape_std_check_locate - only declaration left after commit 161beff8f40d ("s390/tape: remove tape block leftovers") drivers/s390/char/tape_std.h: tape_std_default_handler - has only declaration since recorded git history. drivers/s390/char/tape_std.h: tape_std_unexpect_uchk_handler - has only declaration since recorded git history. drivers/s390/char/tape_std.h: tape_std_irq - has only declaration since recorded git history. drivers/s390/char/tape_std.h: tape_std_error_recovery - has only declaration since recorded git history. drivers/s390/char/tape_std.h: tape_std_error_recovery_has_failed - has only declaration since recorded git history. drivers/s390/char/tape_std.h: tape_std_error_recovery_succeded - has only declaration since recorded git history. drivers/s390/char/tape_std.h: tape_std_error_recovery_do_retry - has only declaration since recorded git history. drivers/s390/char/tape_std.h: tape_std_error_recovery_read_opposite - has only declaration since recorded git history. drivers/s390/char/tape_std.h: tape_std_error_recovery_HWBUG - has only declaration since recorded git history. Reviewed-by: Sven Schnelle Signed-off-by: Vasily Gorbik

s390/cio: Convert timers to use timer_setup()

2017-11-14T10:01:36Z

In preparation for unconditionally passing the struct timer_list pointer to all timer callbacks, switch to using the new timer_setup() and from_timer() to pass the timer pointer explicitly. Cc: Sebastian Ott Cc: Peter Oberparleiter Signed-off-by: Kees Cook Signed-off-by: Martin Schwidefsky Signed-off-by: Heiko Carstens

License cleanup: add SPDX GPL-2.0 license identifier to files with no license

2017-11-02T10:10:55Z

Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart Reviewed-by: Philippe Ombredanne Reviewed-by: Thomas Gleixner Signed-off-by: Greg Kroah-Hartman

s390/cio: recover from bad paths

2017-09-19T06:36:19Z

In some situations we don't receive notification from firmware that a previously unusable channelpath is usable again. Schedule recovery for devices that return from path verification without using all potentially usable paths. The recovery thread will periodically trigger a path verification on the affected devices. Signed-off-by: Sebastian Ott Suggested-by: Peter Oberparleiter Reviewed-by: Peter Oberparleiter Signed-off-by: Martin Schwidefsky

s390/cio: clean up DEV_STATE_SENSE_PGID

2016-10-28T08:09:03Z

Clean up DEV_STATE_SENSE_PGID related code, since it's not used anymore. Everything related to path verification is handled within DEV_STATE_VERIFY. Signed-off-by: Dong Jia Shi Acked-by: Sebastian Ott Signed-off-by: Martin Schwidefsky

s390/cio: move ccw_device_stlck functions

2015-10-27T08:34:44Z

device_ops.c should only contain functions that are called by ccw device drivers. Move the cio internal functions that handle unconditional reserve + release to device_pgid.c Acked-by: Peter Oberparleiter Signed-off-by: Sebastian Ott Signed-off-by: Martin Schwidefsky

s390/cio: move ccw_device_call_handler

2015-10-27T08:34:43Z

device_ops.c should only contain functions that are called by ccw device drivers. Move the cio internal function ccw_device_call_handler to device_fsm.c where it's used. Remove some useless comments while at it. Acked-by: Peter Oberparleiter Signed-off-by: Sebastian Ott Signed-off-by: Martin Schwidefsky

s390/cio: reactivate cmf after hibernate

2015-10-14T12:32:04Z

During resume from hibernate we already reenable measurement block updates on a per device basis. In addition to that we also need to activate channel measurement globally using the set channel monitor instruction. Signed-off-by: Sebastian Ott Reviewed-by: Martin Schwidefsky Reviewed-by: Cornelia Huck Signed-off-by: Martin Schwidefsky

s390/cio: fix early init counter usage

2013-04-17T12:07:33Z

Via ccw_device_init_count we keep track of how many devices are in asynchronous device recognition/initialization. For early devices this variable was not only used prior to its initialization but used incorrectly (incremented but never decremented). Fix this by using static initialization for this variable (and friends), make them visible to device.c only, and decrement the counter after recognition of early devices is finished. Reviewed-by: Peter Oberparleiter Signed-off-by: Sebastian Ott Signed-off-by: Martin Schwidefsky