linux-dev/drivers/s390, branch master

s390/zcrypt: fix warning about field-spanning write

2022-11-02T21:15:57Z

This patch fixes the warning memcpy: detected field-spanning write (size 60) of single field "to" at drivers/s390/crypto/zcrypt_api.h:173 (size 2) WARNING: CPU: 1 PID: 2114 at drivers/s390/crypto/zcrypt_api.h:173 prep_ep11_ap_msg+0x2c6/0x2e0 [zcrypt] The code has been rewritten to use a union in combination with a flex array to clearly state which part of the buffer the payload is to be copied in via z_copy_from_user function (which may call memcpy() in case of in-kernel calls). Signed-off-by: Harald Freudenberger Suggested-by: Jürgen Christ Reviewed-by: Jürgen Christ Signed-off-by: Vasily Gorbik

s390/vfio-ap: Fix memory allocation for mdev_types array

2022-10-26T12:47:31Z

The vfio-ap crypto driver fails to allocate memory for an array of pointers used to pass supported mdev types to mdev_register_parent(). Since we only support a single mdev type, the fix is to allocate a single entry in the ap_matrix_dev->mdev_types array. Link: https://lore.kernel.org/r/20221021145905.15100-1-jjherne@linux.ibm.com Fixes: da44c340c4fe ("vfio/mdev: simplify mdev_type handling") Cc: stable@vger.kernel.org Cc: Tony Krowiak Reported-by: Christian Borntraeger Reviewed-by: Matthew Rosato Signed-off-by: Jason J. Herne Signed-off-by: Vasily Gorbik

s390/cio: fix out-of-bounds access on cio_ignore free

2022-10-26T12:47:31Z

The channel-subsystem-driver scans for newly available devices whenever device-IDs are removed from the cio_ignore list using a command such as: echo free >/proc/cio_ignore Since an I/O device scan might interfer with running I/Os, commit 172da89ed0ea ("s390/cio: avoid excessive path-verification requests") introduced an optimization to exclude online devices from the scan. The newly added check for online devices incorrectly assumes that an I/O-subchannel's drvdata points to a struct io_subchannel_private. For devices that are bound to a non-default I/O subchannel driver, such as the vfio_ccw driver, this results in an out-of-bounds read access during each scan. Fix this by changing the scan logic to rely on a driver-independent online indication. For this we can use struct subchannel->config.ena, which is the driver's requested subchannel-enabled state. Since I/Os can only be started on enabled subchannels, this matches the intent of the original optimization of not scanning devices where I/O might be running. Fixes: 172da89ed0ea ("s390/cio: avoid excessive path-verification requests") Fixes: 0c3812c347bf ("s390/cio: derive cdev information only for IO-subchannels") Cc: # v5.15 Reported-by: Alexander Egorenkov Reviewed-by: Vineeth Vijayan Signed-off-by: Peter Oberparleiter Signed-off-by: Vasily Gorbik

Merge tag 's390-6.1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux

2022-10-14T18:36:05Z

Pull more s390 updates from Vasily Gorbik: - Generate a change uevent on unsolicited device end I/O interrupt for z/VM unit record devices supported by the vmur driver. This event can be used to automatically trigger processing of files as they arrive in the z/VM reader. * tag 's390-6.1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: s390/vmur: generate uevent on unsolicited device end s390/vmur: remove unnecessary BUG statement

Merge tag 'vfio-v6.1-rc1' of https://github.com/awilliam/linux-vfio

2022-10-12T21:46:48Z

Pull VFIO updates from Alex Williamson: - Prune private items from vfio_pci_core.h to a new internal header, fix missed function rename, and refactor vfio-pci interrupt defines (Jason Gunthorpe) - Create consistent naming and handling of ioctls with a function per ioctl for vfio-pci and vfio group handling, use proper type args where available (Jason Gunthorpe) - Implement a set of low power device feature ioctls allowing userspace to make use of power states such as D3cold where supported (Abhishek Sahu) - Remove device counter on vfio groups, which had restricted the page pinning interface to singleton groups to account for limitations in the type1 IOMMU backend. Document usage as limited to emulated IOMMU devices, ie. traditional mdev devices where this restriction is consistent (Jason Gunthorpe) - Correct function prefix in hisi_acc driver incurred during previous refactoring (Shameer Kolothum) - Correct typo and remove redundant warning triggers in vfio-fsl driver (Christophe JAILLET) - Introduce device level DMA dirty tracking uAPI and implementation in the mlx5 variant driver (Yishai Hadas & Joao Martins) - Move much of the vfio_device life cycle management into vfio core, simplifying and avoiding duplication across drivers. This also facilitates adding a struct device to vfio_device which begins the introduction of device rather than group level user support and fills a gap allowing userspace identify devices as vfio capable without implicit knowledge of the driver (Kevin Tian & Yi Liu) - Split vfio container handling to a separate file, creating a more well defined API between the core and container code, masking IOMMU backend implementation from the core, allowing for an easier future transition to an iommufd based implementation of the same (Jason Gunthorpe) - Attempt to resolve race accessing the iommu_group for a device between vfio releasing DMA ownership and removal of the device from the IOMMU driver. Follow-up with support to allow vfio_group to exist with NULL iommu_group pointer to support existing userspace use cases of holding the group file open (Jason Gunthorpe) - Fix error code and hi/lo register manipulation issues in the hisi_acc variant driver, along with various code cleanups (Longfang Liu) - Fix a prior regression in GVT-g group teardown, resulting in unreleased resources (Jason Gunthorpe) - A significant cleanup and simplification of the mdev interface, consolidating much of the open coded per driver sysfs interface support into the mdev core (Christoph Hellwig) - Simplification of tracking and locking around vfio_groups that fall out from previous refactoring (Jason Gunthorpe) - Replace trivial open coded f_ops tests with new helper (Alex Williamson) * tag 'vfio-v6.1-rc1' of https://github.com/awilliam/linux-vfio: (77 commits) vfio: More vfio_file_is_group() use cases vfio: Make the group FD disassociate from the iommu_group vfio: Hold a reference to the iommu_group in kvm for SPAPR vfio: Add vfio_file_is_group() vfio: Change vfio_group->group_rwsem to a mutex vfio: Remove the vfio_group->users and users_comp vfio/mdev: add mdev available instance checking to the core vfio/mdev: consolidate all the description sysfs into the core code vfio/mdev: consolidate all the available_instance sysfs into the core code vfio/mdev: consolidate all the name sysfs into the core code vfio/mdev: consolidate all the device_api sysfs into the core code vfio/mdev: remove mtype_get_parent_dev vfio/mdev: remove mdev_parent_dev vfio/mdev: unexport mdev_bus_type vfio/mdev: remove mdev_from_dev vfio/mdev: simplify mdev_type handling vfio/mdev: embedd struct mdev_parent in the parent data structure vfio/mdev: make mdev.h standalone includable drm/i915/gvt: simplify vgpu configuration management drm/i915/gvt: fix a memory leak in intel_gvt_init_vgpu_types ...

s390/vmur: generate uevent on unsolicited device end

2022-10-10T08:15:10Z

When a traditional channel-attached device transitions from not-ready to ready state, an unsolicited DEVICE END I/O interrupt is raised. This happens for example when a new file arrives in the z/VM virtual reader device. Change the Linux kernel to generate a change uevent when such an interrupt occurs for any online unit record devices supported by the vmur driver. This can be useful to automatically trigger processing of files as they arrive in the reader device. A sample udev rule for running a program when this event occurs looks as follows: ENV{DRIVER}=="vmur", ACTION=="change", ENV{EVENT}=="unsol_de", \ RUN{program}="/path/to/program" The rule can be tested using the following steps: 1. Set reader device online (assuming default reader device number 000c) $ chzdev -ea 0.0.000c 2. Force a ready-state transition using z/VM's READY CP command $ vmcp ready 000c Suggested-by: Alan Altmark Reviewed-by: Heiko Carstens Reviewed-by: Sven Schnelle Signed-off-by: Peter Oberparleiter Signed-off-by: Vasily Gorbik

s390/vmur: remove unnecessary BUG statement

2022-10-10T08:15:10Z

An existing BUG statement in vmur's interrupt handler triggers if: 1. An online vmur device is removed (e.g. due to driver unload, manual unbind or channel-report words indicating hypervisor-side device removal) 2. Device deactivation fails due to firmware/hypervisor error, leaving subchannel enabled for interrupts + drvdata=NULL 3. Interrupt occurs This situation is highly unlikely and not a clear indication of a general system error that would warrant stopping the full Linux system. Also it can be prevented completely by clearing the interrupt handler when unsetting a vmur device's drvdata. Replace the BUG statement in vmur's interrupt handler by clearing the interrupt handler callback during device removal. Also move the initial setting of the interrupt handler callback under lock for consistency reasons. Reviewed-by: Sven Schnelle Reviewed-by: Heiko Carstens Signed-off-by: Peter Oberparleiter Signed-off-by: Vasily Gorbik

Merge tag 's390-6.1-1' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux

2022-10-09T20:51:40Z

Pull s390 updates from Vasily Gorbik: - Make use of the IBM z16 processor activity instrumentation facility extension to count neural network processor assist operations: add a new PMU device driver so that perf can make use of this. - Rework memcpy_real() to avoid DAT-off mode. - Rework absolute lowcore access code. - Various small fixes and improvements all over the code. * tag 's390-6.1-1' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: s390/pci: remove unused bus_next field from struct zpci_dev s390/cio: remove unused ccw_device_force_console() declaration s390/pai: Add support for PAI Extension 1 NNPA counters s390/mm: fix no previous prototype warnings in maccess.c s390/mm: uninline copy_oldmem_kernel() function s390/mm,ptdump: add real memory copy page markers s390/mm: rework memcpy_real() to avoid DAT-off mode s390/dump: save IPL CPU registers once DAT is available s390/pci: convert high_memory to physical address s390/smp,ptdump: add absolute lowcore markers s390/smp: rework absolute lowcore access s390/smp: call smp_reinit_ipl_cpu() before scheduler is available s390/ptdump: add missing amode31 markers s390/mm: split lowcore pages with set_memory_4k() s390/mm: remove unused access parameter from do_fault_error() s390/delay: sync comment within __delay() with reality s390: move from strlcpy with unused retval to strscpy

Merge tag 'tty-6.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty

2022-10-07T23:36:24Z

Pull tty/serial driver updates from Greg KH: "Here is the big set of TTY and Serial driver updates for 6.1-rc1. Lots of cleanups in here, no real new functionality this time around, with the diffstat being that we removed more lines than we added! Included in here are: - termios unification cleanups from Al Viro, it's nice to finally get this work done - tty serial transmit cleanups in various drivers in preparation for more cleanup and unification in future releases (that work was not ready for this release) - n_gsm fixes and updates - ktermios cleanups and code reductions - dt bindings json conversions and updates for new devices - some serial driver updates for new devices - lots of other tiny cleanups and janitorial stuff. Full details in the shortlog. All of these have been in linux-next for a while with no reported issues" * tag 'tty-6.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (102 commits) serial: cpm_uart: Don't request IRQ too early for console port tty: serial: do unlock on a common path in altera_jtaguart_console_putc() tty: serial: unify TX space reads under altera_jtaguart_tx_space() tty: serial: use FIELD_GET() in lqasc_tx_ready() tty: serial: extend lqasc_tx_ready() to lqasc_console_putchar() tty: serial: allow pxa.c to be COMPILE_TESTed serial: stm32: Fix unused-variable warning tty: serial: atmel: Add COMMON_CLK dependency to SERIAL_ATMEL serial: 8250: Fix restoring termios speed after suspend serial: Deassert Transmit Enable on probe in driver-specific way serial: 8250_dma: Convert to use uart_xmit_advance() serial: 8250_omap: Convert to use uart_xmit_advance() MAINTAINERS: Solve warning regarding inexistent atmel-usart binding serial: stm32: Deassert Transmit Enable on ->rs485_config() serial: ar933x: Deassert Transmit Enable on ->rs485_config() tty: serial: atmel: Use FIELD_PREP/FIELD_GET tty: serial: atmel: Make the driver aware of the existence of GCLK tty: serial: atmel: Only divide Clock Divisor if the IP is USART tty: serial: atmel: Separate mode clearing between UART and USART dt-bindings: serial: atmel,at91-usart: Add gclk as a possible USART clock ...

Merge tag 'for-6.1/block-2022-10-03' of git://git.kernel.dk/linux

2022-10-07T16:19:14Z

Pull block updates from Jens Axboe: - NVMe pull requests via Christoph: - handle number of queue changes in the TCP and RDMA drivers (Daniel Wagner) - allow changing the number of queues in nvmet (Daniel Wagner) - also consider host_iface when checking ip options (Daniel Wagner) - don't map pages which can't come from HIGHMEM (Fabio M. De Francesco) - avoid unnecessary flush bios in nvmet (Guixin Liu) - shrink and better pack the nvme_iod structure (Keith Busch) - add comment for unaligned "fake" nqn (Linjun Bao) - print actual source IP address through sysfs "address" attr (Martin Belanger) - various cleanups (Jackie Liu, Wolfram Sang, Genjian Zhang) - handle effects after freeing the request (Keith Busch) - copy firmware_rev on each init (Keith Busch) - restrict management ioctls to admin (Keith Busch) - ensure subsystem reset is single threaded (Keith Busch) - report the actual number of tagset maps in nvme-pci (Keith Busch) - small fabrics authentication fixups (Christoph Hellwig) - add common code for tagset allocation and freeing (Christoph Hellwig) - stop using the request_queue in nvmet (Christoph Hellwig) - set min_align_mask before calculating max_hw_sectors (Rishabh Bhatnagar) - send a rediscover uevent when a persistent discovery controller reconnects (Sagi Grimberg) - misc nvmet-tcp fixes (Varun Prakash, zhenwei pi) - MD pull request via Song: - Various raid5 fix and clean up, by Logan Gunthorpe and David Sloan. - Raid10 performance optimization, by Yu Kuai. - sbitmap wakeup hang fixes (Hugh, Keith, Jan, Yu) - IO scheduler switching quisce fix (Keith) - s390/dasd block driver updates (Stefan) - support for recovery for the ublk driver (ZiyangZhang) - rnbd drivers fixes and updates (Guoqing, Santosh, ye, Christoph) - blk-mq and null_blk map fixes (Bart) - various bcache fixes (Coly, Jilin, Jules) - nbd signal hang fix (Shigeru) - block writeback throttling fix (Yu) - optimize the passthrough mapping handling (me) - prepare block cgroups to being gendisk based (Christoph) - get rid of an old PSI hack in the block layer, moving it to the callers instead where it belongs (Christoph) - blk-throttle fixes and cleanups (Yu) - misc fixes and cleanups (Liu Shixin, Liu Song, Miaohe, Pankaj, Ping-Xiang, Wolfram, Saurabh, Li Jinlin, Li Lei, Lin, Li zeming, Miaohe, Bart, Coly, Gaosheng * tag 'for-6.1/block-2022-10-03' of git://git.kernel.dk/linux: (162 commits) sbitmap: fix lockup while swapping block: add rationale for not using blk_mq_plug() when applicable block: adapt blk_mq_plug() to not plug for writes that require a zone lock s390/dasd: use blk_mq_alloc_disk blk-cgroup: don't update the blkg lookup hint in blkg_conf_prep nvmet: don't look at the request_queue in nvmet_bdev_set_limits nvmet: don't look at the request_queue in nvmet_bdev_zone_mgmt_emulate_all blk-mq: use quiesced elevator switch when reinitializing queues block: replace blk_queue_nowait with bdev_nowait nvme: remove nvme_ctrl_init_connect_q nvme-loop: use the tagset alloc/free helpers nvme-loop: store the generic nvme_ctrl in set->driver_data nvme-loop: initialize sqsize later nvme-fc: use the tagset alloc/free helpers nvme-fc: store the generic nvme_ctrl in set->driver_data nvme-fc: keep ctrl->sqsize in sync with opts->queue_size nvme-rdma: use the tagset alloc/free helpers nvme-rdma: store the generic nvme_ctrl in set->driver_data nvme-tcp: use the tagset alloc/free helpers nvme-tcp: store the generic nvme_ctrl in set->driver_data ...