linux-dev/drivers/scsi/bfa/include/bfi, branch master

[SCSI] bfa: cleanup driver

2010-09-17T02:54:24Z

We have flattened the BFA hierarchy and also reduced the number of source and header files we used to have earlier. Signed-off-by: Krishna Gudipati Signed-off-by: James Bottomley

[SCSI] bfa: update to support BOFM

2010-07-27T17:04:21Z

Update bfa driver API and data structure to support BOFM (IBM BladeCenter Open Fabric Manager). Signed-off-by: Jing Huang Signed-off-by: James Bottomley

[SCSI] bfa: fix chip and memory initialization

2010-07-27T17:04:15Z

Clear PSS memory reset that is set as part of power-on-reset (pci reset). Complete PMM memory reset before BISTR start. Clear EDRAM BISTR start bit after fixed delay. BISTR DONE bit status is not getting set. Use a fixed 1ms delay for BISTR now. Expose PMM IT memory definitions to host. Signed-off-by: Jing Huang Signed-off-by: James Bottomley

[SCSI] bfa: ioc attributes fix

2010-07-27T17:04:06Z

This patch fixes the APIs to obtain ioc attributes - fix API to obtain wwpn, wwnn, and mac. - add API to get mfg wwpn, wwnn, and mac. - fix API to obtain wwn of boot target. Signed-off-by: Jing Huang Signed-off-by: James Bottomley

[SCSI] bfa: enable basic PBC support

2010-07-27T17:04:04Z

The patch includes the driver side changes to enable basic PBC (PreBoot Configuration) feature. - Data structure changes and new definitions for PBC. - APIs to access PBC info. - Remove unused code. Signed-off-by: Jing Huang Signed-off-by: James Bottomley

[SCSI] bfa: enable new hardware

2010-07-27T17:04:03Z

This patch enables support of new mezzanine cards for HP and IBM blade server. - Add new pciids for HP and IBM mezzanine card. - Add a new firmware image for HP mezzanine card, which is running in FC only mode. Rename firmware image to reflect the difference. Change the firmware download code accordingly for the above changes. Signed-off-by: Jing Huang Signed-off-by: James Bottomley

[SCSI] bfa: Modified the portstats get/clear logic

2010-03-07T07:40:13Z

Modified the portstats get/clear logic for port physical/FCoE/QoS stats. Added more stats to FC Fixed some issues with FCoE stats collection. Signed-off-by: Krishna Gudipati Signed-off-by: James Bottomley

[SCSI] bfa: Rename pport to fcport in BFA FCS.

2010-03-07T07:35:10Z

Rename pport structures to fcport in BFA FCS, to resolve confusion about the port structures in the firmware, and make sure the SG page is setup correctly. Signed-off-by: Krishna Gudipati Signed-off-by: James Bottomley

[SCSI] bfa: Clear LL_HALT and PSS_ERR bit when IOC crashes.

2010-03-07T07:23:53Z

Clear LL_HALT and PSS_ERR bit in the interrupt status register on an IOC crash. Signed-off-by: Krishna Gudipati Signed-off-by: James Bottomley

[SCSI] bfa: IOC changes: Support faster recovery and split bfa_ioc.c into ASIC specific code.

2010-03-07T07:19:48Z

Add support for faster IOC recovery after failure. Split bfa_ioc.c into three files: bfa_ioc.c: Common code shared between crossbow and catapult ASIC's. bfa_ioc_cb.c: Code specific to the crossbow, reg mapping and interrupt related routines. bfa_ioc_ct.c: Code specific to the catapult, reg mapping and interrupt related routines. Fix to make sure IOC reinitialize's properly on enable request - update the ioc_fwstate reg with BFI_IOC_FAIL on ioc disable mbox cmd timeout. Makefile changes to support the 2 newly added files bfa_ioc_cb.c and bfa_ioc_ct.c. Signed-off-by: Krishna Gudipati Signed-off-by: James Bottomley