linux-dev/drivers/scsi/bnx2fc, branch master

scsi: bnx2fc: Avoid using get_cpu() in bnx2fc_cmd_alloc()

2022-05-17T01:26:50Z

Using get_cpu() leads to disabling preemption and in this context it is not possible to acquire the following spinlock_t on PREEMPT_RT because it becomes a sleeping lock. Commit 0ea5c27583e1 ("[SCSI] bnx2fc: common free list for cleanup commands") says that it is using get_cpu() as a fix in case the CPU is preempted. While this might be true, the important part is that it is now using the same CPU for locking and unlocking while previously it always relied on smp_processor_id(). The date structure itself is protected with a lock so it does not rely on CPU-local access. Replace get_cpu() with raw_smp_processor_id() to obtain the current CPU number which is used as an index for the per-CPU resource. Link: https://lore.kernel.org/r/20220506105758.283887-5-bigeasy@linutronix.de Reviewed-by: Davidlohr Bueso Signed-off-by: Sebastian Andrzej Siewior Signed-off-by: Martin K. Petersen

scsi: fcoe: Use per-CPU API to update per-CPU statistics

2022-05-17T01:26:50Z

The per-CPU statistics (struct fc_stats) is updated by getting a stable per-CPU pointer via get_cpu() + per_cpu_ptr() and then performing the increment. This can be optimized by using this_cpu_*() which will do whatever is needed on the architecture to perform the update safe and efficient. The read out of the individual value (fc_get_host_stats()) should be done by using READ_ONCE() instead of a plain-C access. The difference is that READ_ONCE() will always perform a single access while the plain-C access can be split by the compiler into two loads if it appears beneficial. The usage of u64 has the side-effect that it is also 64bit wide on 32bit architectures and the read is always split into two loads. The can lead to strange values if the read happens during an update which alters both 32bit parts of the 64bit value. This can be circumvented by either using a 32bit variables on 32bit architecures or extending the statistics with a sequence counter. Use this_cpu_*() API to update the statistics and READ_ONCE() to read it. Link: https://lore.kernel.org/r/20220506105758.283887-3-bigeasy@linutronix.de Reviewed-by: Davidlohr Bueso Signed-off-by: Sebastian Andrzej Siewior Signed-off-by: Martin K. Petersen

scsi: bnx2fc: Fix spelling mistake "mis-match" -> "mismatch"

2022-03-30T04:06:44Z

There are a few spelling mistakes in some error messages. Fix them. Link: https://lore.kernel.org/r/20220319231122.21476-1-colin.i.king@gmail.com Signed-off-by: Colin Ian King Signed-off-by: Martin K. Petersen

scsi: bnx2fc: Stop using the SCSI pointer

2022-02-23T02:11:05Z

Set .cmd_size in the SCSI host template instead of using the SCSI pointer from struct scsi_cmnd. Remove the CMD_SCSI_STATUS() assignment because the assigned value is not used. This patch prepares for removal of the SCSI pointer from struct scsi_cmnd. Link: https://lore.kernel.org/r/20220218195117.25689-29-bvanassche@acm.org Reviewed-by: Hannes Reinecke Signed-off-by: Bart Van Assche Signed-off-by: Martin K. Petersen

Merge branch '5.17/scsi-fixes' into 5.18/scsi-staging

2022-02-15T02:51:29Z

Pull 5.17 fixes branch into 5.18 tree to resolve a few pm8001 driver merge conflicts. Signed-off-by: Martin K. Petersen

scsi: bnx2fc: Make use of the helper macro kthread_run()

2022-01-31T21:56:57Z

Repalce kthread_create/wake_up_process() with kthread_run() to simplify the code. Link: https://lore.kernel.org/r/20220126014248.466806-1-yinxiujiang@kylinos.cn Signed-off-by: Yin Xiujiang Signed-off-by: Martin K. Petersen

scsi: bnx2fc: Fix typo in comments

2022-01-31T21:49:31Z

Replace 'Offlaod' with 'Offload'. Link: https://lore.kernel.org/r/20220128063101.6953-1-cai.huoqing@linux.dev Acked-by: Saurav Kashyap Signed-off-by: Cai Huoqing Signed-off-by: Martin K. Petersen

scsi: bnx2fc: Make bnx2fc_recv_frame() mp safe

2022-01-31T17:17:53Z

Running tests with a debug kernel shows that bnx2fc_recv_frame() is modifying the per_cpu lport stats counters in a non-mpsafe way. Just boot a debug kernel and run the bnx2fc driver with the hardware enabled. [ 1391.699147] BUG: using smp_processor_id() in preemptible [00000000] code: bnx2fc_ [ 1391.699160] caller is bnx2fc_recv_frame+0xbf9/0x1760 [bnx2fc] [ 1391.699174] CPU: 2 PID: 4355 Comm: bnx2fc_l2_threa Kdump: loaded Tainted: G B [ 1391.699180] Hardware name: HP ProLiant DL120 G7, BIOS J01 07/01/2013 [ 1391.699183] Call Trace: [ 1391.699188] dump_stack_lvl+0x57/0x7d [ 1391.699198] check_preemption_disabled+0xc8/0xd0 [ 1391.699205] bnx2fc_recv_frame+0xbf9/0x1760 [bnx2fc] [ 1391.699215] ? do_raw_spin_trylock+0xb5/0x180 [ 1391.699221] ? bnx2fc_npiv_create_vports.isra.0+0x4e0/0x4e0 [bnx2fc] [ 1391.699229] ? bnx2fc_l2_rcv_thread+0xb7/0x3a0 [bnx2fc] [ 1391.699240] bnx2fc_l2_rcv_thread+0x1af/0x3a0 [bnx2fc] [ 1391.699250] ? bnx2fc_ulp_init+0xc0/0xc0 [bnx2fc] [ 1391.699258] kthread+0x364/0x420 [ 1391.699263] ? _raw_spin_unlock_irq+0x24/0x50 [ 1391.699268] ? set_kthread_struct+0x100/0x100 [ 1391.699273] ret_from_fork+0x22/0x30 Restore the old get_cpu/put_cpu code with some modifications to reduce the size of the critical section. Link: https://lore.kernel.org/r/20220124145110.442335-1-jmeneghi@redhat.com Fixes: d576a5e80cd0 ("bnx2fc: Improve stats update mechanism") Tested-by: Guangwu Zhang Acked-by: Saurav Kashyap Signed-off-by: John Meneghini Signed-off-by: Martin K. Petersen

scsi: bnx2fc: Flush destroy_work queue before calling bnx2fc_interface_put()

2022-01-25T04:30:28Z

The bnx2fc_destroy() functions are removing the interface before calling destroy_work. This results multiple WARNings from sysfs_remove_group() as the controller rport device attributes are removed too early. Replace the fcoe_port's destroy_work queue. It's not needed. The problem is easily reproducible with the following steps. Example: $ dmesg -w & $ systemctl enable --now fcoe $ fipvlan -s -c ens2f1 $ fcoeadm -d ens2f1.802 [ 583.464488] host2: libfc: Link down on port (7500a1) [ 583.472651] bnx2fc: 7500a1 - rport not created Yet!! [ 583.490468] ------------[ cut here ]------------ [ 583.538725] sysfs group 'power' not found for kobject 'rport-2:0-0' [ 583.568814] WARNING: CPU: 3 PID: 192 at fs/sysfs/group.c:279 sysfs_remove_group+0x6f/0x80 [ 583.607130] Modules linked in: dm_service_time 8021q garp mrp stp llc bnx2fc cnic uio rpcsec_gss_krb5 auth_rpcgss nfsv4 ... [ 583.942994] CPU: 3 PID: 192 Comm: kworker/3:2 Kdump: loaded Not tainted 5.14.0-39.el9.x86_64 #1 [ 583.984105] Hardware name: HP ProLiant DL120 G7, BIOS J01 07/01/2013 [ 584.016535] Workqueue: fc_wq_2 fc_rport_final_delete [scsi_transport_fc] [ 584.050691] RIP: 0010:sysfs_remove_group+0x6f/0x80 [ 584.074725] Code: ff 5b 48 89 ef 5d 41 5c e9 ee c0 ff ff 48 89 ef e8 f6 b8 ff ff eb d1 49 8b 14 24 48 8b 33 48 c7 c7 ... [ 584.162586] RSP: 0018:ffffb567c15afdc0 EFLAGS: 00010282 [ 584.188225] RAX: 0000000000000000 RBX: ffffffff8eec4220 RCX: 0000000000000000 [ 584.221053] RDX: ffff8c1586ce84c0 RSI: ffff8c1586cd7cc0 RDI: ffff8c1586cd7cc0 [ 584.255089] RBP: 0000000000000000 R08: 0000000000000000 R09: ffffb567c15afc00 [ 584.287954] R10: ffffb567c15afbf8 R11: ffffffff8fbe7f28 R12: ffff8c1486326400 [ 584.322356] R13: ffff8c1486326480 R14: ffff8c1483a4a000 R15: 0000000000000004 [ 584.355379] FS: 0000000000000000(0000) GS:ffff8c1586cc0000(0000) knlGS:0000000000000000 [ 584.394419] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 584.421123] CR2: 00007fe95a6f7840 CR3: 0000000107674002 CR4: 00000000000606e0 [ 584.454888] Call Trace: [ 584.466108] device_del+0xb2/0x3e0 [ 584.481701] device_unregister+0x13/0x60 [ 584.501306] bsg_unregister_queue+0x5b/0x80 [ 584.522029] bsg_remove_queue+0x1c/0x40 [ 584.541884] fc_rport_final_delete+0xf3/0x1d0 [scsi_transport_fc] [ 584.573823] process_one_work+0x1e3/0x3b0 [ 584.592396] worker_thread+0x50/0x3b0 [ 584.609256] ? rescuer_thread+0x370/0x370 [ 584.628877] kthread+0x149/0x170 [ 584.643673] ? set_kthread_struct+0x40/0x40 [ 584.662909] ret_from_fork+0x22/0x30 [ 584.680002] ---[ end trace 53575ecefa942ece ]--- Link: https://lore.kernel.org/r/20220115040044.1013475-1-jmeneghi@redhat.com Fixes: 0cbf32e1681d ("[SCSI] bnx2fc: Avoid calling bnx2fc_if_destroy with unnecessary locks") Tested-by: Guangwu Zhang Co-developed-by: Maurizio Lombardi Signed-off-by: Maurizio Lombardi Signed-off-by: John Meneghini Signed-off-by: Martin K. Petersen

scsi: bnx2fc: Switch to attribute groups

2021-10-17T01:45:54Z

struct device supports attribute groups directly but does not support struct device_attribute directly. Hence switch to attribute groups. Link: https://lore.kernel.org/r/20211012233558.4066756-16-bvanassche@acm.org Signed-off-by: Bart Van Assche Signed-off-by: Martin K. Petersen