<feed xmlns='http://www.w3.org/2005/Atom'>
<title>linux-dev/drivers/scsi/ibmvscsi, branch master</title>
<subtitle>Linux kernel development work - see feature branches</subtitle>
<id>https://git.zx2c4.com/linux-dev/atom/drivers/scsi/ibmvscsi?h=master</id>
<link rel='self' href='https://git.zx2c4.com/linux-dev/atom/drivers/scsi/ibmvscsi?h=master'/>
<link rel='alternate' type='text/html' href='https://git.zx2c4.com/linux-dev/'/>
<updated>2022-11-07T18:57:39Z</updated>
<entry>
<title>scsi: ibmvfc: Avoid path failures during live migration</title>
<updated>2022-11-07T18:57:39Z</updated>
<author>
<name>Brian King</name>
<email>brking@linux.vnet.ibm.com</email>
</author>
<published>2022-10-26T18:13:56Z</published>
<link rel='alternate' type='text/html' href='https://git.zx2c4.com/linux-dev/commit/?id=62fa3ce05d5d73c5eccc40b2db493f55fecfc446'/>
<id>urn:sha1:62fa3ce05d5d73c5eccc40b2db493f55fecfc446</id>
<content type='text'>
Fix an issue reported when performing a live migration when multipath is
configured with a short fast fail timeout of 5 seconds and also to have
no_path_retry set to fail. In this scenario, all paths would go into the
devloss state while the ibmvfc driver went through discovery to log back
in. On a loaded system, the discovery might take longer than 5 seconds,
which was resulting in all paths being marked failed, which then resulted
in a read only filesystem.

This patch changes the migration code in ibmvfc to avoid deleting rports at
all in this scenario, so we avoid losing all paths.

Signed-off-by: Brian King &lt;brking@linux.vnet.ibm.com&gt;
Link: https://lore.kernel.org/r/20221026181356.148517-1-brking@linux.vnet.ibm.com
Signed-off-by: Martin K. Petersen &lt;martin.petersen@oracle.com&gt;
</content>
</entry>
<entry>
<title>scsi: ibmvfc: Store vhost pointer during subcrq allocation</title>
<updated>2022-06-17T01:42:04Z</updated>
<author>
<name>Tyrel Datwyler</name>
<email>tyreld@linux.ibm.com</email>
</author>
<published>2022-06-16T19:11:25Z</published>
<link rel='alternate' type='text/html' href='https://git.zx2c4.com/linux-dev/commit/?id=aeaadcde1a60138bceb65de3cdaeec78170b4459'/>
<id>urn:sha1:aeaadcde1a60138bceb65de3cdaeec78170b4459</id>
<content type='text'>
Currently the back pointer from a queue to the vhost adapter isn't set
until after subcrq interrupt registration. The value is available when a
queue is first allocated and can/should be also set for primary and async
queues as well as subcrqs.

This fixes a crash observed during kexec/kdump on Power 9 with legacy XICS
interrupt controller where a pending subcrq interrupt from the previous
kernel can be replayed immediately upon IRQ registration resulting in
dereference of a garbage backpointer in ibmvfc_interrupt_scsi().

Kernel attempted to read user page (58) - exploit attempt? (uid: 0)
BUG: Kernel NULL pointer dereference on read at 0x00000058
Faulting instruction address: 0xc008000003216a08
Oops: Kernel access of bad area, sig: 11 [#1]
...
NIP [c008000003216a08] ibmvfc_interrupt_scsi+0x40/0xb0 [ibmvfc]
LR [c0000000082079e8] __handle_irq_event_percpu+0x98/0x270
Call Trace:
[c000000047fa3d80] [c0000000123e6180] 0xc0000000123e6180 (unreliable)
[c000000047fa3df0] [c0000000082079e8] __handle_irq_event_percpu+0x98/0x270
[c000000047fa3ea0] [c000000008207d18] handle_irq_event+0x98/0x188
[c000000047fa3ef0] [c00000000820f564] handle_fasteoi_irq+0xc4/0x310
[c000000047fa3f40] [c000000008205c60] generic_handle_irq+0x50/0x80
[c000000047fa3f60] [c000000008015c40] __do_irq+0x70/0x1a0
[c000000047fa3f90] [c000000008016d7c] __do_IRQ+0x9c/0x130
[c000000014622f60] [0000000020000000] 0x20000000
[c000000014622ff0] [c000000008016e50] do_IRQ+0x40/0xa0
[c000000014623020] [c000000008017044] replay_soft_interrupts+0x194/0x2f0
[c000000014623210] [c0000000080172a8] arch_local_irq_restore+0x108/0x170
[c000000014623240] [c000000008eb1008] _raw_spin_unlock_irqrestore+0x58/0xb0
[c000000014623270] [c00000000820b12c] __setup_irq+0x49c/0x9f0
[c000000014623310] [c00000000820b7c0] request_threaded_irq+0x140/0x230
[c000000014623380] [c008000003212a50] ibmvfc_register_scsi_channel+0x1e8/0x2f0 [ibmvfc]
[c000000014623450] [c008000003213d1c] ibmvfc_init_sub_crqs+0xc4/0x1f0 [ibmvfc]
[c0000000146234d0] [c0080000032145a8] ibmvfc_reset_crq+0x150/0x210 [ibmvfc]
[c000000014623550] [c0080000032147c8] ibmvfc_init_crq+0x160/0x280 [ibmvfc]
[c0000000146235f0] [c00800000321a9cc] ibmvfc_probe+0x2a4/0x530 [ibmvfc]

Link: https://lore.kernel.org/r/20220616191126.1281259-2-tyreld@linux.ibm.com
Fixes: 3034ebe26389 ("scsi: ibmvfc: Add alloc/dealloc routines for SCSI Sub-CRQ Channels")
Cc: stable@vger.kernel.org
Reviewed-by: Brian King &lt;brking@linux.vnet.ibm.com&gt;
Signed-off-by: Tyrel Datwyler &lt;tyreld@linux.ibm.com&gt;
Signed-off-by: Martin K. Petersen &lt;martin.petersen@oracle.com&gt;
</content>
</entry>
<entry>
<title>scsi: ibmvfc: Allocate/free queue resource only during probe/remove</title>
<updated>2022-06-17T01:40:10Z</updated>
<author>
<name>Tyrel Datwyler</name>
<email>tyreld@linux.ibm.com</email>
</author>
<published>2022-06-16T19:11:26Z</published>
<link rel='alternate' type='text/html' href='https://git.zx2c4.com/linux-dev/commit/?id=72ea7fe0db73d65c7d977208842d8ade9b823de9'/>
<id>urn:sha1:72ea7fe0db73d65c7d977208842d8ade9b823de9</id>
<content type='text'>
Currently, the sub-queues and event pool resources are allocated/freed for
every CRQ connection event such as reset and LPM. This exposes the driver
to a couple issues. First the inefficiency of freeing and reallocating
memory that can simply be resued after being sanitized. Further, a system
under memory pressue runs the risk of allocation failures that could result
in a crippled driver. Finally, there is a race window where command
submission/compeletion can try to pull/return elements from/to an event
pool that is being deleted or already has been deleted due to the lack of
host state around freeing/allocating resources. The following is an example
of list corruption following a live partition migration (LPM):

Oops: Exception in kernel mode, sig: 5 [#1]
LE PAGE_SIZE=64K MMU=Hash SMP NR_CPUS=2048 NUMA pSeries
Modules linked in: vfat fat isofs cdrom ext4 mbcache jbd2 nft_counter nft_compat nf_tables nfnetlink rpadlpar_io rpaphp xsk_diag nfsv3 nfs_acl nfs lockd grace fscache netfs rfkill bonding tls sunrpc pseries_rng drm drm_panel_orientation_quirks xfs libcrc32c dm_service_time sd_mod t10_pi sg ibmvfc scsi_transport_fc ibmveth vmx_crypto dm_multipath dm_mirror dm_region_hash dm_log dm_mod ipmi_devintf ipmi_msghandler fuse
CPU: 0 PID: 2108 Comm: ibmvfc_0 Kdump: loaded Not tainted 5.14.0-70.9.1.el9_0.ppc64le #1
NIP: c0000000007c4bb0 LR: c0000000007c4bac CTR: 00000000005b9a10
REGS: c00000025c10b760 TRAP: 0700  Not tainted (5.14.0-70.9.1.el9_0.ppc64le)
MSR: 800000000282b033 &lt;SF,VEC,VSX,EE,FP,ME,IR,DR,RI,LE&gt; CR: 2800028f XER: 0000000f
CFAR: c0000000001f55bc IRQMASK: 0
        GPR00: c0000000007c4bac c00000025c10ba00 c000000002a47c00 000000000000004e
        GPR04: c0000031e3006f88 c0000031e308bd00 c00000025c10b768 0000000000000027
        GPR08: 0000000000000000 c0000031e3009dc0 00000031e0eb0000 0000000000000000
        GPR12: c0000031e2ffffa8 c000000002dd0000 c000000000187108 c00000020fcee2c0
        GPR16: 0000000000000000 0000000000000000 0000000000000000 0000000000000000
        GPR20: 0000000000000000 0000000000000000 0000000000000000 c008000002f81300
        GPR24: 5deadbeef0000100 5deadbeef0000122 c000000263ba6910 c00000024cc88000
        GPR28: 000000000000003c c0000002430a0000 c0000002430ac300 000000000000c300
NIP [c0000000007c4bb0] __list_del_entry_valid+0x90/0x100
LR [c0000000007c4bac] __list_del_entry_valid+0x8c/0x100
Call Trace:
[c00000025c10ba00] [c0000000007c4bac] __list_del_entry_valid+0x8c/0x100 (unreliable)
[c00000025c10ba60] [c008000002f42284] ibmvfc_free_queue+0xec/0x210 [ibmvfc]
[c00000025c10bb10] [c008000002f4246c] ibmvfc_deregister_scsi_channel+0xc4/0x160 [ibmvfc]
[c00000025c10bba0] [c008000002f42580] ibmvfc_release_sub_crqs+0x78/0x130 [ibmvfc]
[c00000025c10bc20] [c008000002f4f6cc] ibmvfc_do_work+0x5c4/0xc70 [ibmvfc]
[c00000025c10bce0] [c008000002f4fdec] ibmvfc_work+0x74/0x1e8 [ibmvfc]
[c00000025c10bda0] [c0000000001872b8] kthread+0x1b8/0x1c0
[c00000025c10be10] [c00000000000cd64] ret_from_kernel_thread+0x5c/0x64
Instruction dump:
40820034 38600001 38210060 4e800020 7c0802a6 7c641b78 3c62fe7a 7d254b78
3863b590 f8010070 4ba309cd 60000000 &lt;0fe00000&gt; 7c0802a6 3c62fe7a 3863b640
---[ end trace 11a2b65a92f8b66c ]---
ibmvfc 30000003: Send warning. Receive queue closed, will retry.

Add registration/deregistration helpers that are called instead during
connection resets to sanitize and reconfigure the queues.

Link: https://lore.kernel.org/r/20220616191126.1281259-3-tyreld@linux.ibm.com
Fixes: 3034ebe26389 ("scsi: ibmvfc: Add alloc/dealloc routines for SCSI Sub-CRQ Channels")
Cc: stable@vger.kernel.org
Reviewed-by: Brian King &lt;brking@linux.vnet.ibm.com&gt;
Signed-off-by: Tyrel Datwyler &lt;tyreld@linux.ibm.com&gt;
Signed-off-by: Martin K. Petersen &lt;martin.petersen@oracle.com&gt;
</content>
</entry>
<entry>
<title>Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi</title>
<updated>2021-11-05T15:42:02Z</updated>
<author>
<name>Linus Torvalds</name>
<email>torvalds@linux-foundation.org</email>
</author>
<published>2021-11-05T15:42:02Z</published>
<link rel='alternate' type='text/html' href='https://git.zx2c4.com/linux-dev/commit/?id=fe91c4725aeed35023ba4f7a1e1adfebb6878c23'/>
<id>urn:sha1:fe91c4725aeed35023ba4f7a1e1adfebb6878c23</id>
<content type='text'>
Pull SCSI updates from James Bottomley:
 "This consists of the usual driver updates (ufs, smartpqi, lpfc,
  target, megaraid_sas, hisi_sas, qla2xxx) and minor updates and bug
  fixes.

  Notable core changes are the removal of scsi-&gt;tag which caused some
  churn in obsolete drivers and a sweep through all drivers to call
  scsi_done() directly instead of scsi-&gt;done() which removes a pointer
  indirection from the hot path and a move to register core sysfs files
  earlier, which means they're available to KOBJ_ADD processing, which
  necessitates switching all drivers to using attribute groups"

* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (279 commits)
  scsi: lpfc: Update lpfc version to 14.0.0.3
  scsi: lpfc: Allow fabric node recovery if recovery is in progress before devloss
  scsi: lpfc: Fix link down processing to address NULL pointer dereference
  scsi: lpfc: Allow PLOGI retry if previous PLOGI was aborted
  scsi: lpfc: Fix use-after-free in lpfc_unreg_rpi() routine
  scsi: lpfc: Correct sysfs reporting of loop support after SFP status change
  scsi: lpfc: Wait for successful restart of SLI3 adapter during host sg_reset
  scsi: lpfc: Revert LOG_TRACE_EVENT back to LOG_INIT prior to driver_resource_setup()
  scsi: ufs: ufshcd-pltfrm: Fix memory leak due to probe defer
  scsi: ufs: mediatek: Avoid sched_clock() misuse
  scsi: mpt3sas: Make mpt3sas_dev_attrs static
  scsi: scsi_transport_sas: Add 22.5 Gbps link rate definitions
  scsi: target: core: Stop using bdevname()
  scsi: aha1542: Use memcpy_{from,to}_bvec()
  scsi: sr: Add error handling support for add_disk()
  scsi: sd: Add error handling support for add_disk()
  scsi: target: Perform ALUA group changes in one step
  scsi: target: Replace lun_tg_pt_gp_lock with rcu in I/O path
  scsi: target: Fix alua_tg_pt_gps_count tracking
  scsi: target: Fix ordered tag handling
  ...
</content>
</entry>
<entry>
<title>Merge tag 'overflow-v5.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux</title>
<updated>2021-11-02T00:12:56Z</updated>
<author>
<name>Linus Torvalds</name>
<email>torvalds@linux-foundation.org</email>
</author>
<published>2021-11-02T00:12:56Z</published>
<link rel='alternate' type='text/html' href='https://git.zx2c4.com/linux-dev/commit/?id=2dc26d98cfdf756e390013fafaba959b052b0867'/>
<id>urn:sha1:2dc26d98cfdf756e390013fafaba959b052b0867</id>
<content type='text'>
Pull overflow updates from Kees Cook:
 "The end goal of the current buffer overflow detection work[0] is to
  gain full compile-time and run-time coverage of all detectable buffer
  overflows seen via array indexing or memcpy(), memmove(), and
  memset(). The str*() family of functions already have full coverage.

  While much of the work for these changes have been on-going for many
  releases (i.e. 0-element and 1-element array replacements, as well as
  avoiding false positives and fixing discovered overflows[1]), this
  series contains the foundational elements of several related buffer
  overflow detection improvements by providing new common helpers and
  FORTIFY_SOURCE changes needed to gain the introspection required for
  compiler visibility into array sizes. Also included are a handful of
  already Acked instances using the helpers (or related clean-ups), with
  many more waiting at the ready to be taken via subsystem-specific
  trees[2].

  The new helpers are:

   - struct_group() for gaining struct member range introspection

   - memset_after() and memset_startat() for clearing to the end of
     structures

   - DECLARE_FLEX_ARRAY() for using flex arrays in unions or alone in
     structs

  Also included is the beginning of the refactoring of FORTIFY_SOURCE to
  support memcpy() introspection, fix missing and regressed coverage
  under GCC, and to prepare to fix the currently broken Clang support.
  Finishing this work is part of the larger series[0], but depends on
  all the false positives and buffer overflow bug fixes to have landed
  already and those that depend on this series to land.

  As part of the FORTIFY_SOURCE refactoring, a set of both a
  compile-time and run-time tests are added for FORTIFY_SOURCE and the
  mem*()-family functions respectively. The compile time tests have
  found a legitimate (though corner-case) bug[6] already.

  Please note that the appearance of "panic" and "BUG" in the
  FORTIFY_SOURCE refactoring are the result of relocating existing code,
  and no new use of those code-paths are expected nor desired.

  Finally, there are two tree-wide conversions for 0-element arrays and
  flexible array unions to gain sane compiler introspection coverage
  that result in no known object code differences.

  After this series (and the changes that have now landed via netdev and
  usb), we are very close to finally being able to build with
  -Warray-bounds and -Wzero-length-bounds.

  However, due corner cases in GCC[3] and Clang[4], I have not included
  the last two patches that turn on these options, as I don't want to
  introduce any known warnings to the build. Hopefully these can be
  solved soon"

Link: https://lore.kernel.org/lkml/20210818060533.3569517-1-keescook@chromium.org/ [0]
Link: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/log/?qt=grep&amp;q=FORTIFY_SOURCE [1]
Link: https://lore.kernel.org/lkml/202108220107.3E26FE6C9C@keescook/ [2]
Link: https://lore.kernel.org/lkml/3ab153ec-2798-da4c-f7b1-81b0ac8b0c5b@roeck-us.net/ [3]
Link: https://bugs.llvm.org/show_bug.cgi?id=51682 [4]
Link: https://lore.kernel.org/lkml/202109051257.29B29745C0@keescook/ [5]
Link: https://lore.kernel.org/lkml/20211020200039.170424-1-keescook@chromium.org/ [6]

* tag 'overflow-v5.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux: (30 commits)
  fortify: strlen: Avoid shadowing previous locals
  compiler-gcc.h: Define __SANITIZE_ADDRESS__ under hwaddress sanitizer
  treewide: Replace 0-element memcpy() destinations with flexible arrays
  treewide: Replace open-coded flex arrays in unions
  stddef: Introduce DECLARE_FLEX_ARRAY() helper
  btrfs: Use memset_startat() to clear end of struct
  string.h: Introduce memset_startat() for wiping trailing members and padding
  xfrm: Use memset_after() to clear padding
  string.h: Introduce memset_after() for wiping trailing members/padding
  lib: Introduce CONFIG_MEMCPY_KUNIT_TEST
  fortify: Add compile-time FORTIFY_SOURCE tests
  fortify: Allow strlen() and strnlen() to pass compile-time known lengths
  fortify: Prepare to improve strnlen() and strlen() warnings
  fortify: Fix dropped strcpy() compile-time write overflow check
  fortify: Explicitly disable Clang support
  fortify: Move remaining fortify helpers into fortify-string.h
  lib/string: Move helper functions out of string.c
  compiler_types.h: Remove __compiletime_object_size()
  cm4000_cs: Use struct_group() to zero struct cm4000_dev region
  can: flexcan: Use struct_group() to zero struct flexcan_regs regions
  ...
</content>
</entry>
<entry>
<title>scsi: ibmvfc: Fix up duplicate response detection</title>
<updated>2021-10-21T02:59:45Z</updated>
<author>
<name>Brian King</name>
<email>brking@linux.vnet.ibm.com</email>
</author>
<published>2021-10-19T15:21:29Z</published>
<link rel='alternate' type='text/html' href='https://git.zx2c4.com/linux-dev/commit/?id=e20f80b9b163dc402dca115eed0affba6df5ebb5'/>
<id>urn:sha1:e20f80b9b163dc402dca115eed0affba6df5ebb5</id>
<content type='text'>
Commit a264cf5e81c7 ("scsi: ibmvfc: Fix command state accounting and stale
response detection") introduced a regression in detecting duplicate
responses. This was observed in test where a command was sent to the VIOS
and completed before ibmvfc_send_event() set the active flag to 1, which
resulted in the atomic_dec_if_positive() call in ibmvfc_handle_crq()
thinking this was a duplicate response, which resulted in scsi_done() not
getting called, so we then hit a SCSI command timeout for this command once
the timeout expires.  This simply ensures the active flag gets set prior to
making the hcall to send the command to the VIOS, in order to close this
window.

Link: https://lore.kernel.org/r/20211019152129.16558-1-brking@linux.vnet.ibm.com
Fixes: a264cf5e81c7 ("scsi: ibmvfc: Fix command state accounting and stale response detection")
Cc: stable@vger.kernel.org
Acked-by: Tyrel Datwyler &lt;tyreld@linux.ibm.com&gt;
Signed-off-by: Brian King &lt;brking@linux.vnet.ibm.com&gt;
Signed-off-by: Martin K. Petersen &lt;martin.petersen@oracle.com&gt;
</content>
</entry>
<entry>
<title>scsi: ibmvscsi: Use GFP_KERNEL with dma_alloc_coherent() in initialize_event_pool()</title>
<updated>2021-10-19T02:38:34Z</updated>
<author>
<name>Tyrel Datwyler</name>
<email>tyreld@linux.vnet.ibm.com</email>
</author>
<published>2019-01-10T02:59:09Z</published>
<link rel='alternate' type='text/html' href='https://git.zx2c4.com/linux-dev/commit/?id=3319a8ba82b9f9c18568b18bc1febb34ae18b2c2'/>
<id>urn:sha1:3319a8ba82b9f9c18568b18bc1febb34ae18b2c2</id>
<content type='text'>
During driver probe we allocate a dma region for our event pool.
Currently, zero is passed for the gfp_flags parameter. Driver probe
callbacks are run in process context and we hold no locks so we can sleep
here if necessary.

Fix by passing GFP_KERNEL explicitly to dma_alloc_coherent().

Link: https://lore.kernel.org/r/1547089149-20577-1-git-send-email-tyreld@linux.vnet.ibm.com
Reviewed-by: Brian King &lt;brking@linux.vnet.ibm.com&gt;
Signed-off-by: Tyrel Datwyler &lt;tyreld@linux.vnet.ibm.com&gt;
Signed-off-by: Martin K. Petersen &lt;martin.petersen@oracle.com&gt;
</content>
</entry>
<entry>
<title>scsi: ibmvfc: Switch to attribute groups</title>
<updated>2021-10-17T01:45:56Z</updated>
<author>
<name>Bart Van Assche</name>
<email>bvanassche@acm.org</email>
</author>
<published>2021-10-12T23:35:36Z</published>
<link rel='alternate' type='text/html' href='https://git.zx2c4.com/linux-dev/commit/?id=7adbf68f4950794519ccd462ba0c336a65ea3701'/>
<id>urn:sha1:7adbf68f4950794519ccd462ba0c336a65ea3701</id>
<content type='text'>
struct device supports attribute groups directly but does not support
struct device_attribute directly. Hence switch to attribute groups.

Link: https://lore.kernel.org/r/20211012233558.4066756-25-bvanassche@acm.org
Acked-by: Tyrel Datwyler &lt;tyreld@linux.ibm.com&gt;
Signed-off-by: Bart Van Assche &lt;bvanassche@acm.org&gt;
Signed-off-by: Martin K. Petersen &lt;martin.petersen@oracle.com&gt;
</content>
</entry>
<entry>
<title>scsi: ibmvscsi: Switch to attribute groups</title>
<updated>2021-10-17T01:45:56Z</updated>
<author>
<name>Bart Van Assche</name>
<email>bvanassche@acm.org</email>
</author>
<published>2021-10-12T23:35:35Z</published>
<link rel='alternate' type='text/html' href='https://git.zx2c4.com/linux-dev/commit/?id=c7da4e1cd0407cb6813d48aede1579428f79aa91'/>
<id>urn:sha1:c7da4e1cd0407cb6813d48aede1579428f79aa91</id>
<content type='text'>
struct device supports attribute groups directly but does not support
struct device_attribute directly. Hence switch to attribute groups.

Link: https://lore.kernel.org/r/20211012233558.4066756-24-bvanassche@acm.org
Acked-by: Tyrel Datwyler &lt;tyreld@linux.ibm.com&gt;
Signed-off-by: Bart Van Assche &lt;bvanassche@acm.org&gt;
Signed-off-by: Martin K. Petersen &lt;martin.petersen@oracle.com&gt;
</content>
</entry>
<entry>
<title>scsi: core: Remove the 'done' argument from SCSI queuecommand_lck functions</title>
<updated>2021-10-17T01:32:16Z</updated>
<author>
<name>Bart Van Assche</name>
<email>bvanassche@acm.org</email>
</author>
<published>2021-10-07T20:46:14Z</published>
<link rel='alternate' type='text/html' href='https://git.zx2c4.com/linux-dev/commit/?id=af049dfd0b105bab32170d1c68826a4cd8424efd'/>
<id>urn:sha1:af049dfd0b105bab32170d1c68826a4cd8424efd</id>
<content type='text'>
The DEF_SCSI_QCMD() macro passes the addresses of the SCSI host lock and
also that of the scsi_done function to the queuecommand_lck() function
implementations. Remove the 'scsi_done' argument since its address is
now a constant and instead call 'scsi_done' directly from inside the
queuecommand_lck() functions.

Link: https://lore.kernel.org/r/20211007204618.2196847-14-bvanassche@acm.org
Signed-off-by: Bart Van Assche &lt;bvanassche@acm.org&gt;
Signed-off-by: Martin K. Petersen &lt;martin.petersen@oracle.com&gt;
</content>
</entry>
</feed>
