linux-dev/drivers/scsi, branch linus/master

scsi: ibmvfc: Store vhost pointer during subcrq allocation

2022-06-17T01:42:04Z

Currently the back pointer from a queue to the vhost adapter isn't set until after subcrq interrupt registration. The value is available when a queue is first allocated and can/should be also set for primary and async queues as well as subcrqs. This fixes a crash observed during kexec/kdump on Power 9 with legacy XICS interrupt controller where a pending subcrq interrupt from the previous kernel can be replayed immediately upon IRQ registration resulting in dereference of a garbage backpointer in ibmvfc_interrupt_scsi(). Kernel attempted to read user page (58) - exploit attempt? (uid: 0) BUG: Kernel NULL pointer dereference on read at 0x00000058 Faulting instruction address: 0xc008000003216a08 Oops: Kernel access of bad area, sig: 11 [#1] ... NIP [c008000003216a08] ibmvfc_interrupt_scsi+0x40/0xb0 [ibmvfc] LR [c0000000082079e8] __handle_irq_event_percpu+0x98/0x270 Call Trace: [c000000047fa3d80] [c0000000123e6180] 0xc0000000123e6180 (unreliable) [c000000047fa3df0] [c0000000082079e8] __handle_irq_event_percpu+0x98/0x270 [c000000047fa3ea0] [c000000008207d18] handle_irq_event+0x98/0x188 [c000000047fa3ef0] [c00000000820f564] handle_fasteoi_irq+0xc4/0x310 [c000000047fa3f40] [c000000008205c60] generic_handle_irq+0x50/0x80 [c000000047fa3f60] [c000000008015c40] __do_irq+0x70/0x1a0 [c000000047fa3f90] [c000000008016d7c] __do_IRQ+0x9c/0x130 [c000000014622f60] [0000000020000000] 0x20000000 [c000000014622ff0] [c000000008016e50] do_IRQ+0x40/0xa0 [c000000014623020] [c000000008017044] replay_soft_interrupts+0x194/0x2f0 [c000000014623210] [c0000000080172a8] arch_local_irq_restore+0x108/0x170 [c000000014623240] [c000000008eb1008] _raw_spin_unlock_irqrestore+0x58/0xb0 [c000000014623270] [c00000000820b12c] __setup_irq+0x49c/0x9f0 [c000000014623310] [c00000000820b7c0] request_threaded_irq+0x140/0x230 [c000000014623380] [c008000003212a50] ibmvfc_register_scsi_channel+0x1e8/0x2f0 [ibmvfc] [c000000014623450] [c008000003213d1c] ibmvfc_init_sub_crqs+0xc4/0x1f0 [ibmvfc] [c0000000146234d0] [c0080000032145a8] ibmvfc_reset_crq+0x150/0x210 [ibmvfc] [c000000014623550] [c0080000032147c8] ibmvfc_init_crq+0x160/0x280 [ibmvfc] [c0000000146235f0] [c00800000321a9cc] ibmvfc_probe+0x2a4/0x530 [ibmvfc] Link: https://lore.kernel.org/r/20220616191126.1281259-2-tyreld@linux.ibm.com Fixes: 3034ebe26389 ("scsi: ibmvfc: Add alloc/dealloc routines for SCSI Sub-CRQ Channels") Cc: stable@vger.kernel.org Reviewed-by: Brian King Signed-off-by: Tyrel Datwyler Signed-off-by: Martin K. Petersen

scsi: ibmvfc: Allocate/free queue resource only during probe/remove

2022-06-17T01:40:10Z

Currently, the sub-queues and event pool resources are allocated/freed for every CRQ connection event such as reset and LPM. This exposes the driver to a couple issues. First the inefficiency of freeing and reallocating memory that can simply be resued after being sanitized. Further, a system under memory pressue runs the risk of allocation failures that could result in a crippled driver. Finally, there is a race window where command submission/compeletion can try to pull/return elements from/to an event pool that is being deleted or already has been deleted due to the lack of host state around freeing/allocating resources. The following is an example of list corruption following a live partition migration (LPM): Oops: Exception in kernel mode, sig: 5 [#1] LE PAGE_SIZE=64K MMU=Hash SMP NR_CPUS=2048 NUMA pSeries Modules linked in: vfat fat isofs cdrom ext4 mbcache jbd2 nft_counter nft_compat nf_tables nfnetlink rpadlpar_io rpaphp xsk_diag nfsv3 nfs_acl nfs lockd grace fscache netfs rfkill bonding tls sunrpc pseries_rng drm drm_panel_orientation_quirks xfs libcrc32c dm_service_time sd_mod t10_pi sg ibmvfc scsi_transport_fc ibmveth vmx_crypto dm_multipath dm_mirror dm_region_hash dm_log dm_mod ipmi_devintf ipmi_msghandler fuse CPU: 0 PID: 2108 Comm: ibmvfc_0 Kdump: loaded Not tainted 5.14.0-70.9.1.el9_0.ppc64le #1 NIP: c0000000007c4bb0 LR: c0000000007c4bac CTR: 00000000005b9a10 REGS: c00000025c10b760 TRAP: 0700 Not tainted (5.14.0-70.9.1.el9_0.ppc64le) MSR: 800000000282b033 CR: 2800028f XER: 0000000f CFAR: c0000000001f55bc IRQMASK: 0 GPR00: c0000000007c4bac c00000025c10ba00 c000000002a47c00 000000000000004e GPR04: c0000031e3006f88 c0000031e308bd00 c00000025c10b768 0000000000000027 GPR08: 0000000000000000 c0000031e3009dc0 00000031e0eb0000 0000000000000000 GPR12: c0000031e2ffffa8 c000000002dd0000 c000000000187108 c00000020fcee2c0 GPR16: 0000000000000000 0000000000000000 0000000000000000 0000000000000000 GPR20: 0000000000000000 0000000000000000 0000000000000000 c008000002f81300 GPR24: 5deadbeef0000100 5deadbeef0000122 c000000263ba6910 c00000024cc88000 GPR28: 000000000000003c c0000002430a0000 c0000002430ac300 000000000000c300 NIP [c0000000007c4bb0] __list_del_entry_valid+0x90/0x100 LR [c0000000007c4bac] __list_del_entry_valid+0x8c/0x100 Call Trace: [c00000025c10ba00] [c0000000007c4bac] __list_del_entry_valid+0x8c/0x100 (unreliable) [c00000025c10ba60] [c008000002f42284] ibmvfc_free_queue+0xec/0x210 [ibmvfc] [c00000025c10bb10] [c008000002f4246c] ibmvfc_deregister_scsi_channel+0xc4/0x160 [ibmvfc] [c00000025c10bba0] [c008000002f42580] ibmvfc_release_sub_crqs+0x78/0x130 [ibmvfc] [c00000025c10bc20] [c008000002f4f6cc] ibmvfc_do_work+0x5c4/0xc70 [ibmvfc] [c00000025c10bce0] [c008000002f4fdec] ibmvfc_work+0x74/0x1e8 [ibmvfc] [c00000025c10bda0] [c0000000001872b8] kthread+0x1b8/0x1c0 [c00000025c10be10] [c00000000000cd64] ret_from_kernel_thread+0x5c/0x64 Instruction dump: 40820034 38600001 38210060 4e800020 7c0802a6 7c641b78 3c62fe7a 7d254b78 3863b590 f8010070 4ba309cd 60000000 <0fe00000> 7c0802a6 3c62fe7a 3863b640 ---[ end trace 11a2b65a92f8b66c ]--- ibmvfc 30000003: Send warning. Receive queue closed, will retry. Add registration/deregistration helpers that are called instead during connection resets to sanitize and reconfigure the queues. Link: https://lore.kernel.org/r/20220616191126.1281259-3-tyreld@linux.ibm.com Fixes: 3034ebe26389 ("scsi: ibmvfc: Add alloc/dealloc routines for SCSI Sub-CRQ Channels") Cc: stable@vger.kernel.org Reviewed-by: Brian King Signed-off-by: Tyrel Datwyler Signed-off-by: Martin K. Petersen

scsi: storvsc: Correct reporting of Hyper-V I/O size limits

2022-06-17T01:36:03Z

Current code is based on the idea that the max number of SGL entries also determines the max size of an I/O request. While this idea was true in older versions of the storvsc driver when SGL entry length was limited to 4 Kbytes, commit 3d9c3dcc58e9 ("scsi: storvsc: Enable scatterlist entry lengths > 4Kbytes") removed that limitation. It's now theoretically possible for the block layer to send requests that exceed the maximum size supported by Hyper-V. This problem doesn't currently happen in practice because the block layer defaults to a 512 Kbyte maximum, while Hyper-V in Azure supports 2 Mbyte I/O sizes. But some future configuration of Hyper-V could have a smaller max I/O size, and the block layer could exceed that max. Fix this by correctly setting max_sectors as well as sg_tablesize to reflect the maximum I/O size that Hyper-V reports. While allowing I/O sizes larger than the block layer default of 512 Kbytes doesn’t provide any noticeable performance benefit in the tests we ran, it's still appropriate to report the correct underlying Hyper-V capabilities to the Linux block layer. Also tweak the virt_boundary_mask to reflect that the required alignment derives from Hyper-V communication using a 4 Kbyte page size, and not on the guest page size, which might be bigger (eg. ARM64). Link: https://lore.kernel.org/r/1655190355-28722-1-git-send-email-ssengar@linux.microsoft.com Fixes: 3d9c3dcc58e9 ("scsi: storvsc: Enable scatter list entry lengths > 4Kbytes") Reviewed-by: Michael Kelley Signed-off-by: Saurabh Sengar Signed-off-by: Martin K. Petersen

scsi: iscsi: Exclude zero from the endpoint ID range

2022-06-14T02:11:36Z

The kernel returns an endpoint ID as r.ep_connect_ret.handle in the iscsi_uevent. The iscsid validates a received endpoint ID and treats zero as an error. The commit referenced in the fixes line changed the endpoint ID range, and zero is always assigned to the first endpoint ID. So, the first attempt to create a new iSER connection always fails. Link: https://lore.kernel.org/r/20220613123854.55073-1-sergeygo@nvidia.com Fixes: 3c6ae371b8a1 ("scsi: iscsi: Release endpoint ID when its freed") Reviewed-by: Max Gurtovoy Reviewed-by: Mike Christie Reviewed-by: Lee Duncan Signed-off-by: Sergey Gorenko Signed-off-by: Martin K. Petersen

scsi: scsi_debug: Fix zone transition to full condition

2022-06-10T16:50:05Z

When a write command to a sequential write required or sequential write preferred zone result in the zone write pointer reaching the end of the zone, the zone condition must be set to full AND the number of implicitly or explicitly open zones updated to have a correct accounting for zone resources. However, the function zbc_inc_wp() only sets the zone condition to full without updating the open zone counters, resulting in a zone state machine breakage. Introduce the helper function zbc_set_zone_full() and use it in zbc_inc_wp() to correctly transition zones to the full condition. Link: https://lore.kernel.org/r/20220608011302.92061-1-damien.lemoal@opensource.wdc.com Fixes: f0d1cf9378bd ("scsi: scsi_debug: Add ZBC zone commands") Reviewed-by: Niklas Cassel Acked-by: Douglas Gilbert Signed-off-by: Damien Le Moal Signed-off-by: Martin K. Petersen

scsi: pmcraid: Fix missing resource cleanup in error case

2022-06-08T02:05:14Z

Fix missing resource cleanup (when '(--i) == 0') for error case in pmcraid_register_interrupt_handler(). Link: https://lore.kernel.org/r/20220529153456.4183738-6-cgxu519@mykernel.net Reviewed-by: Dan Carpenter Signed-off-by: Chengguang Xu Signed-off-by: Martin K. Petersen

scsi: ipr: Fix missing/incorrect resource cleanup in error case

2022-06-08T02:05:14Z

Fix missing resource cleanup (when '(--i) == 0') for error case in ipr_alloc_mem() and skip incorrect resource cleanup (when '(--i) == 0') for error case in ipr_request_other_msi_irqs() because variable i started from 1. Link: https://lore.kernel.org/r/20220529153456.4183738-4-cgxu519@mykernel.net Reviewed-by: Dan Carpenter Acked-by: Brian King Signed-off-by: Chengguang Xu Signed-off-by: Martin K. Petersen

scsi: mpt3sas: Fix out-of-bounds compiler warning

2022-06-08T02:01:41Z

I'm facing this warning when building for the parisc64 architecture: drivers/scsi/mpt3sas/mpt3sas_base.c: In function ‘_base_make_ioc_operational’: drivers/scsi/mpt3sas/mpt3sas_base.c:5396:40: warning: array subscript ‘Mpi2SasIOUnitPage1_t {aka struct _MPI2_CONFIG_PAGE_SASIOUNIT_1}[0]’ is partly outside array bounds of ‘unsigned char[20]’ [-Warray-bounds] 5396 | (le16_to_cpu(sas_iounit_pg1->SASWideMaxQueueDepth)) ? drivers/scsi/mpt3sas/mpt3sas_base.c:5382:26: note: referencing an object of size 20 allocated by ‘kzalloc’ 5382 | sas_iounit_pg1 = kzalloc(sz, GFP_KERNEL); | ^~~~~~~~~~~~~~~~~~~~~~~ The problem is, that only 20 bytes are allocated with kmalloc(), which is sufficient to hold the bytes which are needed. Nevertheless, gcc complains because the whole Mpi2SasIOUnitPage1_t struct is 32 bytes in size and thus doesn't fit into those 20 bytes. This patch simply allocates all 32 bytes (instead of 20) and thus avoids the warning. There is no functional change introduced by this patch. While touching the code I cleaned up to calculation of max_wideport_qd, max_narrowport_qd and max_sata_qd to make it easier readable. Test successfully tested on a HP C8000 PA-RISC workstation with 64-bit kernel. Link: https://lore.kernel.org/r/YpZ197iZdDZSCzrT@p100 Signed-off-by: Helge Deller Signed-off-by: Martin K. Petersen

scsi: lpfc: Update lpfc version to 14.2.0.4

2022-06-08T01:38:18Z

Update lpfc version to 14.2.0.4 Link: https://lore.kernel.org/r/20220603174329.63777-10-jsmart2021@gmail.com Co-developed-by: Justin Tee Signed-off-by: Justin Tee Signed-off-by: James Smart Signed-off-by: Martin K. Petersen

scsi: lpfc: Allow reduced polling rate for nvme_admin_async_event cmd completion

2022-06-08T01:38:18Z

NVMe Asynchronous Event Request commands have no command timeout value per specifications. Set WQE option to allow a reduced FLUSH polling rate for I/O error detection specifically for nvme_admin_async_event commands. Link: https://lore.kernel.org/r/20220603174329.63777-9-jsmart2021@gmail.com Co-developed-by: Justin Tee Signed-off-by: Justin Tee Signed-off-by: James Smart Signed-off-by: Martin K. Petersen