linux-dev/drivers/slimbus, branch master

slimbus: qcom-ngd: Add error handling in of_qcom_slim_ngd_register

2022-09-24T12:53:06Z

No error handling is performed when platform_device_add() return fails. Refer to the error handling of driver_set_override(), add error handling for platform_device_add(). Fixes: 917809e2280b ("slimbus: ngd: Add qcom SLIMBus NGD driver") Reviewed-by: Neil Armstrong Signed-off-by: Lin Yujun Link: https://lore.kernel.org/r/20220914031953.94061-1-linyujun809@huawei.com Signed-off-by: Greg Kroah-Hartman

slimbus: qcom-ngd-ctrl: allow compile testing without QCOM_RPROC_COMMON

2022-09-24T12:51:53Z

The Qualcomm common remote-proc code (CONFIG_QCOM_RPROC_COMMON) has necessary stubs, so it is not needed for compile testing. Signed-off-by: Krzysztof Kozlowski Signed-off-by: Srinivas Kandagatla Link: https://lore.kernel.org/r/20220916122910.170730-5-srinivas.kandagatla@linaro.org Signed-off-by: Greg Kroah-Hartman

slimbus: qcom-ngd: simplify error paths with dev_err_probe

2022-09-24T12:51:53Z

Use dev_err_probe to skip printing of deferred probe errors and to simplify error paths. Signed-off-by: Krzysztof Kozlowski Signed-off-by: Srinivas Kandagatla Link: https://lore.kernel.org/r/20220916122910.170730-4-srinivas.kandagatla@linaro.org Signed-off-by: Greg Kroah-Hartman

slimbus: qcom-ngd: cleanup in probe error path

2022-09-24T12:51:53Z

Add proper error path in probe() to cleanup resources previously acquired/allocated to fix warnings visible during probe deferral: notifier callback qcom_slim_ngd_ssr_notify already registered WARNING: CPU: 6 PID: 70 at kernel/notifier.c:28 notifier_chain_register+0x5c/0x90 Modules linked in: CPU: 6 PID: 70 Comm: kworker/u16:1 Not tainted 6.0.0-rc3-next-20220830 #380 Call trace: notifier_chain_register+0x5c/0x90 srcu_notifier_chain_register+0x44/0x90 qcom_register_ssr_notifier+0x38/0x4c qcom_slim_ngd_ctrl_probe+0xd8/0x400 platform_probe+0x6c/0xe0 really_probe+0xbc/0x2d4 __driver_probe_device+0x78/0xe0 driver_probe_device+0x3c/0x12c __device_attach_driver+0xb8/0x120 bus_for_each_drv+0x78/0xd0 __device_attach+0xa8/0x1c0 device_initial_probe+0x18/0x24 bus_probe_device+0xa0/0xac deferred_probe_work_func+0x88/0xc0 process_one_work+0x1d4/0x320 worker_thread+0x2cc/0x44c kthread+0x110/0x114 ret_from_fork+0x10/0x20 Fixes: e1ae85e1830e ("slimbus: qcom-ngd-ctrl: add Protection Domain Restart Support") Cc: Signed-off-by: Krzysztof Kozlowski Signed-off-by: Srinivas Kandagatla Link: https://lore.kernel.org/r/20220916122910.170730-3-srinivas.kandagatla@linaro.org Signed-off-by: Greg Kroah-Hartman

slimbus: qcom-ngd: use correct error in message of pdr_add_lookup() failure

2022-09-24T12:51:53Z

Use correct error code, instead of previous 'ret' value, when printing error from pdr_add_lookup() failure. Fixes: e1ae85e1830e ("slimbus: qcom-ngd-ctrl: add Protection Domain Restart Support") Cc: Signed-off-by: Krzysztof Kozlowski Signed-off-by: Srinivas Kandagatla Link: https://lore.kernel.org/r/20220916122910.170730-2-srinivas.kandagatla@linaro.org Signed-off-by: Greg Kroah-Hartman

slimbus: messaging: fix typos in comments

2022-07-08T13:43:42Z

Spelling mistakes (triple letters) in comments. Detected with the help of Coccinelle. Signed-off-by: Julia Lawall Signed-off-by: Srinivas Kandagatla Link: https://lore.kernel.org/r/20220706101131.6934-3-srinivas.kandagatla@linaro.org Signed-off-by: Greg Kroah-Hartman

drivers: slimbus: Directly use ida_alloc()/free()

2022-07-08T13:43:42Z

Use ida_alloc()/ida_free() instead of deprecated ida_simple_get()/ida_simple_remove() . Signed-off-by: keliu Signed-off-by: Srinivas Kandagatla Link: https://lore.kernel.org/r/20220706101131.6934-2-srinivas.kandagatla@linaro.org Signed-off-by: Greg Kroah-Hartman

Merge tag 'driver-core-5.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core

2022-06-03T18:48:47Z

Pull driver core updates from Greg KH: "Here is the set of driver core changes for 5.19-rc1. Lots of tiny driver core changes and cleanups happened this cycle, but the two major things are: - firmware_loader reorganization and additions including the ability to have XZ compressed firmware images and the ability for userspace to initiate the firmware load when it needs to, instead of being always initiated by the kernel. FPGA devices specifically want this ability to have their firmware changed over the lifetime of the system boot, and this allows them to work without having to come up with yet-another-custom-uapi interface for loading firmware for them. - physical location support added to sysfs so that devices that know this information, can tell userspace where they are located in a common way. Some ACPI devices already support this today, and more bus types should support this in the future. Smaller changes include: - driver_override api cleanups and fixes - error path cleanups and fixes - get_abi script fixes - deferred probe timeout changes. It's that last change that I'm the most worried about. It has been reported to cause boot problems for a number of systems, and I have a tested patch series that resolves this issue. But I didn't get it merged into my tree before 5.18-final came out, so it has not gotten any linux-next testing. I'll send the fixup patches (there are 2) as a follow-on series to this pull request. All have been tested in linux-next for weeks, with no reported issues other than the above-mentioned boot time-outs" * tag 'driver-core-5.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (55 commits) driver core: fix deadlock in __device_attach kernfs: Separate kernfs_pr_cont_buf and rename_lock. topology: Remove unused cpu_cluster_mask() driver core: Extend deferred probe timeout on driver registration MAINTAINERS: add Russ Weight as a firmware loader maintainer driver: base: fix UAF when driver_attach failed test_firmware: fix end of loop test in upload_read_show() driver core: location: Add "back" as a possible output for panel driver core: location: Free struct acpi_pld_info *pld driver core: Add "*" wildcard support to driver_async_probe cmdline param driver core: location: Check for allocations failure arch_topology: Trace the update thermal pressure kernfs: Rename kernfs_put_open_node to kernfs_unlink_open_file. export: fix string handling of namespace in EXPORT_SYMBOL_NS rpmsg: use local 'dev' variable rpmsg: Fix calling device_lock() on non-initialized device firmware_loader: describe 'module' parameter of firmware_upload_register() firmware_loader: Move definitions from sysfs_upload.h to sysfs.h firmware_loader: Fix configs for sysfs split selftests: firmware: Add firmware upload selftests ...

slimbus: qcom: Remove unnecessary print function dev_err()

2022-05-19T16:56:32Z

The print function dev_err() is redundant because platform_get_irq_byname() already prints an error. Eliminate the follow coccicheck warning: ./drivers/slimbus/qcom-ctrl.c:514:2-9: line 514 is redundant because platform_get_irq() already prints an error Reported-by: Abaci Robot Signed-off-by: Yang Li Signed-off-by: Srinivas Kandagatla Link: https://lore.kernel.org/r/20220510095205.337-3-srinivas.kandagatla@linaro.org Signed-off-by: Greg Kroah-Hartman

slimbus: qcom: Fix IRQ check in qcom_slim_probe

2022-05-19T16:56:32Z

platform_get_irq() returns non-zero IRQ number on success, negative error number on failure. And the doc of platform_get_irq() provides a usage example: int irq = platform_get_irq(pdev, 0); if (irq < 0) return irq; Fix the check of return value to catch errors correctly. Fixes: ad7fcbc308b0 ("slimbus: qcom: Add Qualcomm Slimbus controller driver") Cc: stable@vger.kernel.org Signed-off-by: Miaoqian Lin Signed-off-by: Srinivas Kandagatla Link: https://lore.kernel.org/r/20220510095205.337-2-srinivas.kandagatla@linaro.org Signed-off-by: Greg Kroah-Hartman