linux-dev/drivers/soc/aspeed, branch master

soc: aspeed: lpc-ctrl: Block error printing on probe defer cases

2022-02-08T08:52:59Z

Add a checking code when it gets -EPROBE_DEFER while getting a clock resource. In this case, it doesn't need to print out an error message because the probing will be re-visited. Signed-off-by: Jae Hyun Yoo Signed-off-by: Joel Stanley Reviewed-by: Andrew Jeffery Reviewed-by: Iwona Winiarska Link: https://lore.kernel.org/r/20211104173709.222912-1-jae.hyun.yoo@intel.com Link: https://lore.kernel.org/r/20220201070118.196372-1-joel@jms.id.au' Signed-off-by: Arnd Bergmann

soc: aspeed: Add UART routing support

2021-10-22T15:32:09Z

Add driver support for the UART routing control. Users can perform runtime configuration of the RX muxes among the UART controllers and the UART IO pins. The sysfs interface is also exported for the convenience of routing paths check and update. Signed-off-by: Oskar Senft Signed-off-by: Chia-Wei Wang Signed-off-by: Joel Stanley Tested-by: Lei YU Link: https://lore.kernel.org/r/20210927023053.6728-5-chiawei_wang@aspeedtech.com Link: https://lore.kernel.org/r/20211022000616.481772-1-joel@jms.id.au' Signed-off-by: Arnd Bergmann

soc: aspeed-lpc-ctrl: Fix clock cleanup in error path

2021-08-26T09:31:22Z

Move syscon_regmap_lookup_by_compatible() above the devm_clk_get() to avoid missing clk_disable_unprepare(). Fixes: 2f9b25fa6682 ("soc: aspeed: Re-enable FWH2AHB on AST2600") Reported-by: Hulk Robot Signed-off-by: Yang Yingliang Signed-off-by: Joel Stanley Reviewed-by: Joel Stanley Link: https://lore.kernel.org/r/20210824085522.1849410-1-yangyingliang@huawei.com Link: https://lore.kernel.org/r/20210825001214.3056193-1-joel@jms.id.au' Signed-off-by: Arnd Bergmann

soc: aspeed: Re-enable FWH2AHB on AST2600

2021-08-19T04:29:28Z

Recent builds of the vendor u-boot tree disable features of the BMC that may allow unwanted access if not correctly configured. This includes the firmware hub to ahb bridge (FWH2AHB), which is used by this driver. The bit to "un-disable" it is in the SCU. Set it only when the ioctl is called and we are running on the ast2600, as to not open up the 'backdoor' unless there's userspace trying to use it. Fixes: deb50313ba83 ("soc: aspeed-lpc-ctrl: LPC to AHB mapping on ast2600") Link: https://lore.kernel.org/r/20210629073520.318514-2-joel@jms.id.au Signed-off-by: Joel Stanley

soc: aspeed: socinfo: Add AST2625 variant

2021-08-19T04:21:29Z

Add AST26XX series AST2625-A3 SOC ID, taken from the vendor u-boot SDK: arch/arm/mach-aspeed/ast2600/scu_info.c + SOC_ID("AST2625-A3", 0x0503040305030403), Reviewed-by: Dylan Hung Link: https://lore.kernel.org/r/20210818010534.2508122-1-joel@jms.id.au Signed-off-by: Joel Stanley

soc: aspeed: p2a-ctrl: Fix boundary check for mmap

2021-08-17T08:30:44Z

The check mixes pages (vm_pgoff) with bytes (vm_start, vm_end) on one side of the comparison, and uses resource address (rather than just the resource size) on the other side of the comparison. This can allow malicious userspace to easily bypass the boundary check and map pages that are located outside memory-region reserved by the driver. Fixes: 01c60dcea9f7 ("drivers/misc: Add Aspeed P2A control driver") Cc: stable@vger.kernel.org Signed-off-by: Iwona Winiarska Reviewed-by: Andrew Jeffery Tested-by: Andrew Jeffery Reviewed-by: Joel Stanley Signed-off-by: Joel Stanley

soc: aspeed: lpc-ctrl: Fix boundary check for mmap

2021-08-17T08:28:42Z

The check mixes pages (vm_pgoff) with bytes (vm_start, vm_end) on one side of the comparison, and uses resource address (rather than just the resource size) on the other side of the comparison. This can allow malicious userspace to easily bypass the boundary check and map pages that are located outside memory-region reserved by the driver. Fixes: 6c4e97678501 ("drivers/misc: Add Aspeed LPC control driver") Cc: stable@vger.kernel.org Signed-off-by: Iwona Winiarska Reviewed-by: Andrew Jeffery Tested-by: Andrew Jeffery Reviewed-by: Joel Stanley Signed-off-by: Joel Stanley

soc: aspeed: fix a ternary sign expansion bug

2021-04-23T09:16:47Z

The intent here was to return negative error codes but it actually returns positive values. The problem is that type promotion with ternary operations is quite complicated. "ret" is an int. "copied" is a u32. And the snoop_file_read() function returns long. What happens is that "ret" is cast to u32 and becomes positive then it's cast to long and it's still positive. Fix this by removing the ternary so that "ret" is type promoted directly to long. Fixes: 3772e5da4454 ("drivers/misc: Aspeed LPC snoop output using misc chardev") Signed-off-by: Dan Carpenter Signed-off-by: Joel Stanley Reviewed-by: Patrick Venture Link: https://lore.kernel.org/r/YIE90PSXsMTa2Y8n@mwanda Link: https://lore.kernel.org/r/20210423000919.1249474-1-joel@jms.id.au' Signed-off-by: Arnd Bergmann

soc: aspeed: Adapt to new LPC device tree layout

2021-04-09T04:09:22Z

Add check against LPC device v2 compatible string to ensure that the fixed device tree layout is adopted. The LPC register offsets are also fixed accordingly. Signed-off-by: Chia-Wei Wang Reviewed-by: Andrew Jeffery Reviewed-by: Joel Stanley Link: https://lore.kernel.org/r/20210319062752.145730-5-andrew@aj.id.au Signed-off-by: Joel Stanley

soc: aspeed: socinfo: Add new systems

2021-02-10T11:55:45Z

Aspeed's u-boot sdk has been updated with the SoC IDs for the AST2605 variant, as well as A2 and A3 variants of the 2600 family. >From u-boot's arch/arm/mach-aspeed/ast2600/scu_info.c: SOC_ID("AST2600-A0", 0x0500030305000303), SOC_ID("AST2600-A1", 0x0501030305010303), SOC_ID("AST2620-A1", 0x0501020305010203), SOC_ID("AST2600-A2", 0x0502030305010303), SOC_ID("AST2620-A2", 0x0502020305010203), SOC_ID("AST2605-A2", 0x0502010305010103), SOC_ID("AST2600-A3", 0x0503030305030303), SOC_ID("AST2620-A3", 0x0503020305030203), SOC_ID("AST2605-A3", 0x0503010305030103), Fixes: e0218dca5787 ("soc: aspeed: Add soc info driver") Link: https://lore.kernel.org/r/20210210114651.334324-1-joel@jms.id.au Signed-off-by: Joel Stanley