linux-dev/drivers/soc/sunxi/Kconfig, branch master

soc: sunxi: mbus: Only build the driver on ARM/ARM64

2022-07-05T20:05:59Z

This driver exists as a workaround for old devicetrees which are missing interconnects properties, so it is only useful for those specific platforms, which all happen to be ARM or ARM64. This solves the issue that the driver fails to build on RISC-V, where PHYS_OFFSET is not defined. Signed-off-by: Samuel Holland Reviewed-by: Jernej Skrabec Signed-off-by: Jernej Skrabec Link: https://lore.kernel.org/r/20220702032520.22129-1-samuel@sholland.org

soc: sunxi: Deal with the MBUS DMA offsets in a central place

2020-11-18T08:01:30Z

So far most of the drivers with the MBUS quirks had to duplicate the code to deal with DT compatibility and enforcing the DMA offsets. Let's move for a more maintainable solution by putting everything in a notifier that would take care of setting up the DMA offsets for all the MBUS devices. Suggested-by: Robin Murphy Signed-off-by: Maxime Ripard Reviewed-by: Chen-Yu Tsai Reviewed-by: Christoph Hellwig Acked-by: Daniel Vetter

treewide: Add SPDX license identifier - Makefile/Kconfig

2019-05-21T08:50:46Z

Add SPDX license identifiers to all Make/Kconfig files which: - Have no license information of any form These files fall under the project license, GPL v2 only. The resulting SPDX license identifier is: GPL-2.0-only Signed-off-by: Thomas Gleixner Signed-off-by: Greg Kroah-Hartman

soc: sunxi: Fix missing dependency on REGMAP_MMIO

2019-04-30T15:55:08Z

When enabling ARCH_SUNXI from allnoconfig, SUNXI_SRAM is enabled, but not REGMAP_MMIO, so the kernel fails to link with an undefined reference to __devm_regmap_init_mmio_clk. Select REGMAP_MMIO, as suggested in drivers/base/regmap/Kconfig. This creates the following dependency loop: drivers/of/Kconfig:68: symbol OF_IRQ depends on IRQ_DOMAIN kernel/irq/Kconfig:63: symbol IRQ_DOMAIN is selected by REGMAP drivers/base/regmap/Kconfig:7: symbol REGMAP default is visible depending on REGMAP_MMIO drivers/base/regmap/Kconfig:39: symbol REGMAP_MMIO is selected by SUNXI_SRAM drivers/soc/sunxi/Kconfig:4: symbol SUNXI_SRAM is selected by USB_MUSB_SUNXI drivers/usb/musb/Kconfig:63: symbol USB_MUSB_SUNXI depends on GENERIC_PHY drivers/phy/Kconfig:7: symbol GENERIC_PHY is selected by PHY_BCM_NS_USB3 drivers/phy/broadcom/Kconfig:29: symbol PHY_BCM_NS_USB3 depends on MDIO_BUS drivers/net/phy/Kconfig:12: symbol MDIO_BUS default is visible depending on PHYLIB drivers/net/phy/Kconfig:181: symbol PHYLIB is selected by ARC_EMAC_CORE drivers/net/ethernet/arc/Kconfig:18: symbol ARC_EMAC_CORE is selected by ARC_EMAC drivers/net/ethernet/arc/Kconfig:24: symbol ARC_EMAC depends on OF_IRQ To fix the circular dependency, make USB_MUSB_SUNXI select GENERIC_PHY instead of depending on it. This matches the use of GENERIC_PHY by all but two other drivers. Cc: # 4.19 Fixes: 5828729bebbb ("soc: sunxi: export a regmap for EMAC clock reg on A64") Signed-off-by: Samuel Holland Acked-by: Maxime Ripard Signed-off-by: Bin Liu Signed-off-by: Greg Kroah-Hartman

drivers: soc: sunxi: Introduce SoC driver to map SRAMs

2015-06-01T15:57:34Z

The Allwinner SoCs have a handful of SRAM that can be either mapped to be accessible by devices or the CPU. That mapping is controlled by an SRAM controller, and that mapping might not be set by the bootloader, for example if the device wasn't used at all, or if we're using solutions like the U-Boot's Falcon Boot. We could also imagine changing this at runtime for example to change the mapping of these SRAMs to use them for suspend/resume or runtime memory rate change, if that ever happens. These use cases require some API in the kernel to control that mapping, exported through a drivers/soc driver. This driver also implement a debugfs file that shows the SRAM found in the system, the current mapping and the SRAM that have been claimed by some drivers in the kernel. Signed-off-by: Maxime Ripard Acked-by: Arnd Bergmann Acked-by: Hans de Goede Tested-by: Hans de Goede Signed-off-by: Arnd Bergmann