linux-dev/drivers/thermal, branch linus/master

Merge tag 'thermal-5.19-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm

2022-05-30T18:34:13Z

Pull additional thermal control update from Rafael Wysocki: "Add Meteor Lake PCI device ID to the int340x thermal control driver (Sumeet Pawnikar)" * tag 'thermal-5.19-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: thermal: int340x: Add Meteor Lake PCI device ID

thermal: int340x: Add Meteor Lake PCI device ID

2022-05-25T13:44:58Z

Add Meteor Lake PCI ID for processor thermal device. Signed-off-by: Sumeet Pawnikar Reviewed-by: Srinivas Pandruvada Signed-off-by: Rafael J. Wysocki

ACPI: DPTF: Support Meteor Lake

2022-05-25T13:37:07Z

Add Meteor Lake ACPI IDs for DPTF devices. Signed-off-by: Sumeet Pawnikar Reviewed-by: Srinivas Pandruvada Signed-off-by: Rafael J. Wysocki

Merge tag 'thermal-5.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm

2022-05-24T23:19:30Z

Pull thermal control updates from Rafael Wysocki: "These add a thermal library and thermal tools to wrap the netlink interface into event-based callbacks, improve overheat condition handling during suspend-to-idle on Intel SoCs, add some new hardware support, fix bugs and clean up code. Specifics: - Add thermal library and thermal tools to encapsulate the netlink into event based callbacks (Daniel Lezcano, Jiapeng Chong). - Improve overheat condition handling during suspend-to-idle in the Intel PCH thermal driver (Zhang Rui). - Use local ops instead of global ops in devfreq_cooling (Kant Fan). - Clean up _OSC handling in int340x (Davidlohr Bueso). - Switch hisi_termal from CONFIG_PM_SLEEP guards to pm_sleep_ptr() (Hesham Almatary). - Add new k3 j72xx bangdap driver and the corresponding bindings (Keerthy). - Fix missing of_node_put() in the SC iMX driver at probe time (Miaoqian Lin). - Fix memory leak in __thermal_cooling_device_register() when device_register() fails by calling thermal_cooling_device_destroy_sysfs() (Yang Yingliang). - Add sc8180x and sc8280xp compatible string in the DT bindings and lMH support for QCom tsens driver (Bjorn Andersson). - Fix OTP Calibration Register values conforming to the documentation on RZ/G2L and bindings documentation for RZ/G2UL (Biju Das). - Fix type in kerneldoc description for __thermal_bind_params (Corentin Labbe). - Fix potential NULL dereference in sr_thermal_probe() on Broadcom platform (Zheng Yongjun). - Add change mode ops to the thermal-of sensor (Manaf Meethalavalappu Pallikunhi). - Fix non-negative value support by preventing the value to be clamp to zero (Stefan Wahren). - Add compatible string and DT bindings for MSM8960 tsens driver (Dmitry Baryshkov). - Add hwmon support for K3 driver (Massimiliano Minella). - Refactor and add multiple generations support for QCom ADC driver (Jishnu Prakash). - Use platform_get_irq_optional() to get the interrupt on RCar driver and document Document RZ/V2L bindings (Lad Prabhakar). - Remove NULL check after container_of() call from the Intel HFI thermal driver (Haowen Bai)" * tag 'thermal-5.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (38 commits) thermal: intel: pch: improve the cooling delay log thermal: intel: pch: enhance overheat handling thermal: intel: pch: move cooling delay to suspend_noirq phase PM: wakeup: expose pm_wakeup_pending to modules thermal: k3_j72xx_bandgap: Add the bandgap driver support dt-bindings: thermal: k3-j72xx: Add VTM bindings documentation thermal/drivers/imx_sc_thermal: Fix refcount leak in imx_sc_thermal_probe thermal/core: Fix memory leak in __thermal_cooling_device_register() dt-bindings: thermal: tsens: Add sc8280xp compatible dt-bindings: thermal: lmh: Add Qualcomm sc8180x compatible thermal/drivers/qcom/lmh: Add sc8180x compatible thermal/drivers/rz2gl: Fix OTP Calibration Register values dt-bindings: thermal: rzg2l-thermal: Document RZ/G2UL bindings thermal: thermal_of: fix typo on __thermal_bind_params tools/thermal: remove unneeded semicolon tools/lib/thermal: remove unneeded semicolon thermal/drivers/broadcom: Fix potential NULL dereference in sr_thermal_probe tools/thermal: Add thermal daemon skeleton tools/thermal: Add a temperature capture tool tools/thermal: Add util library ...

Merge tag 'pm-5.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm

2022-05-24T23:04:25Z

Pull power management updates from Rafael Wysocki: "These add support for 'artificial' Energy Models in which power numbers for different entities may be in different scales, add support for some new hardware, fix bugs and clean up code in multiple places. Specifics: - Update the Energy Model support code to allow the Energy Model to be artificial, which means that the power values may not be on a uniform scale with other devices providing power information, and update the cpufreq_cooling and devfreq_cooling thermal drivers to support artificial Energy Models (Lukasz Luba). - Make DTPM check the Energy Model type (Lukasz Luba). - Fix policy counter decrementation in cpufreq if Energy Model is in use (Pierre Gondois). - Add CPU-based scaling support to passive devfreq governor (Saravana Kannan, Chanwoo Choi). - Update the rk3399_dmc devfreq driver (Brian Norris). - Export dev_pm_ops instead of suspend() and resume() in the IIO chemical scd30 driver (Jonathan Cameron). - Add namespace variants of EXPORT[_GPL]_SIMPLE_DEV_PM_OPS and PM-runtime counterparts (Jonathan Cameron). - Move symbol exports in the IIO chemical scd30 driver into the IIO_SCD30 namespace (Jonathan Cameron). - Avoid device PM-runtime usage count underflows (Rafael Wysocki). - Allow dynamic debug to control printing of PM messages (David Cohen). - Fix some kernel-doc comments in hibernation code (Yang Li, Haowen Bai). - Preserve ACPI-table override during hibernation (Amadeusz Sławiński). - Improve support for suspend-to-RAM for PSCI OSI mode (Ulf Hansson). - Make Intel RAPL power capping driver support the RaptorLake and AlderLake N processors (Zhang Rui, Sumeet Pawnikar). - Remove redundant store to value after multiply in the RAPL power capping driver (Colin Ian King). - Add AlderLake processor support to the intel_idle driver (Zhang Rui). - Fix regression leading to no genpd governor in the PSCI cpuidle driver and fix the riscv-sbi cpuidle driver to allow a genpd governor to be used (Ulf Hansson). - Fix cpufreq governor clean up code to avoid using kfree() directly to free kobject-based items (Kevin Hao). - Prepare cpufreq for powerpc's asm/prom.h cleanup (Christophe Leroy). - Make intel_pstate notify frequency invariance code when no_turbo is turned on and off (Chen Yu). - Add Sapphire Rapids OOB mode support to intel_pstate (Srinivas Pandruvada). - Make cpufreq avoid unnecessary frequency updates due to mismatch between hardware and the frequency table (Viresh Kumar). - Make remove_cpu_dev_symlink() clear the real_cpus mask to simplify code (Viresh Kumar). - Rearrange cpufreq_offline() and cpufreq_remove_dev() to make the calling convention for some driver callbacks consistent (Rafael Wysocki). - Avoid accessing half-initialized cpufreq policies from the show() and store() sysfs functions (Schspa Shi). - Rearrange cpufreq_offline() to make the calling convention for some driver callbacks consistent (Schspa Shi). - Update CPPC handling in cpufreq (Pierre Gondois). - Extend dev_pm_domain_detach() doc (Krzysztof Kozlowski). - Move genpd's time-accounting to ktime_get_mono_fast_ns() (Ulf Hansson). - Improve the way genpd deals with its governors (Ulf Hansson). - Update the turbostat utility to version 2022.04.16 (Len Brown, Dan Merillat, Sumeet Pawnikar, Zephaniah E. Loss-Cutler-Hull, Chen Yu)" * tag 'pm-5.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (94 commits) PM: domains: Trust domain-idle-states from DT to be correct by genpd PM: domains: Measure power-on/off latencies in genpd based on a governor PM: domains: Allocate governor data dynamically based on a genpd governor PM: domains: Clean up some code in pm_genpd_init() and genpd_remove() PM: domains: Fix initialization of genpd's next_wakeup PM: domains: Fixup QoS latency measurements for IRQ safe devices in genpd PM: domains: Measure suspend/resume latencies in genpd based on governor PM: domains: Move the next_wakeup variable into the struct gpd_timing_data PM: domains: Allocate gpd_timing_data dynamically based on governor PM: domains: Skip another warning in irq_safe_dev_in_sleep_domain() PM: domains: Rename irq_safe_dev_in_no_sleep_domain() in genpd PM: domains: Don't check PM_QOS_FLAG_NO_POWER_OFF in genpd PM: domains: Drop redundant code for genpd always-on governor PM: domains: Add GENPD_FLAG_RPM_ALWAYS_ON for the always-on governor powercap: intel_rapl: remove redundant store to value after multiply cpufreq: CPPC: Enable dvfs_possible_from_any_cpu cpufreq: CPPC: Enable fast_switch ACPI: CPPC: Assume no transition latency if no PCCT ACPI: bus: Set CPPC _OSC bits for all and when CPPC_LIB is supported ACPI: CPPC: Check _OSC for flexible address space ...

Merge tag 'hwmon-for-v5.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging

2022-05-24T21:23:10Z

Pull hwmon updates from Guenter Roeck: "New drivers: - Driver for the Microchip LAN966x SoC - PMBus driver for Infineon Digital Multi-phase xdp152 family controllers Chip support added to existing drivers: - asus-ec-sensors: - Support for ROG STRIX X570-E GAMING WIFI II, PRIME X470-PRO, and ProArt X570 Creator WIFI - External temperature sensor support for ASUS WS X570-ACE - nct6775: - Support for I2C driver - Support for ASUS PRO H410T / PRIME H410M-R / ROG X570-E GAMING WIFI II - lm75: - Support for - Atmel AT30TS74 - pmbus/max16601: - Support for MAX16602 - aquacomputer_d5next: - Support for Aquacomputer Farbwerk - Support for Aquacomputer Octo - jc42: - Support for S-34TS04A Kernel API changes / clarifications: - The chip parameter of with_info API is now mandatory - New hwmon_device_register_for_thermal API call for use by the thermal subsystem Improvements: - PMBus and JC42 drivers now register with thermal subsystem - PMBus drivers now support get_voltage/set_voltage power operations - The adt7475 driver now supports pin configuration - The lm90 driver now supports setting extended range temperatures configuration with a devicetree property - The dell-smm driver now registers as cooling device - The OCC driver delays hwmon registration until requested by userspace ... and various other minor fixes and improvements" * tag 'hwmon-for-v5.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging: (71 commits) hwmon: (aquacomputer_d5next) Fix an error handling path in aqc_probe() hwmon: (sl28cpld) Fix typo in comment hwmon: (pmbus) Check PEC support before reading other registers hwmon: (dimmtemp) Fix bitmap handling hwmon: (lm90) enable extended range according to DTS node dt-bindings: hwmon: lm90: add ti,extended-range-enable property dt-bindings: hwmon: lm90: add missing ti,tmp461 hwmon: (ibmaem) Directly use ida_alloc()/free() hwmon: Directly use ida_alloc()/free() hwmon: (asus-ec-sensors) fix Formula VIII definition dt-bindings: trivial-devices: Add xdp152 hwmon: (sl28cpld-hwmon) Use HWMON_CHANNEL_INFO macro hwmon: (pwm-fan) Use HWMON_CHANNEL_INFO macro hwmon: (peci/dimmtemp) Use HWMON_CHANNEL_INFO macro hwmon: (peci/cputemp) Use HWMON_CHANNEL_INFO macro hwmon: (mr75203) Use HWMON_CHANNEL_INFO macro hwmon: (ltc2992) Use HWMON_CHANNEL_INFO macro hwmon: (as370-hwmon) Use HWMON_CHANNEL_INFO macro hwmon: Make chip parameter for with_info API mandatory thermal/drivers/thermal_hwmon: Use hwmon_device_register_for_thermal() ...

Merge branches 'thermal-int340x', 'thermal-pch' and 'thermal-misc'

2022-05-23T18:32:58Z

Merge int340x thermal driver updates, PCH thermal driver updates and miscellaneous thermal control updates for 5.19-rc1: - Clean up _OSC handling in int340x (Davidlohr Bueso). - Improve overheat condition handling during suspend-to-idle in the Intel PCH thermal driver (Zhang Rui). - Use local ops instead of global ops in devfreq_cooling (Kant Fan). - Switch hisi_termal from CONFIG_PM_SLEEP guards to pm_sleep_ptr() (Hesham Almatary) * thermal-int340x: thermal: int340x: Clean up _OSC context init thermal: int340x: Consolidate freeing of acpi_buffer pointer thermal: int340x: Clean up unnecessary acpi_buffer pointer freeing * thermal-pch: thermal: intel: pch: improve the cooling delay log thermal: intel: pch: enhance overheat handling thermal: intel: pch: move cooling delay to suspend_noirq phase PM: wakeup: expose pm_wakeup_pending to modules * thermal-misc: thermal: devfreq_cooling: use local ops instead of global ops thermal: hisi_termal: Switch from CONFIG_PM_SLEEP guards to pm_sleep_ptr()

Merge back earlier thermal control updates for 5.19-rc1.

2022-05-23T18:31:57Z

Merge branches 'pm-em' and 'pm-cpuidle'

2022-05-23T17:18:51Z

Marge Energy Model support updates and cpuidle updates for 5.19-rc1: - Update the Energy Model support code to allow the Energy Model to be artificial, which means that the power values may not be on a uniform scale with other devices providing power information, and update the cpufreq_cooling and devfreq_cooling thermal drivers to support artificial Energy Models (Lukasz Luba). - Make DTPM check the Energy Model type (Lukasz Luba). - Fix policy counter decrementation in cpufreq if Energy Model is in use (Pierre Gondois). - Add AlderLake processor support to the intel_idle driver (Zhang Rui). - Fix regression leading to no genpd governor in the PSCI cpuidle driver and fix the riscv-sbi cpuidle driver to allow a genpd governor to be used (Ulf Hansson). * pm-em: PM: EM: Decrement policy counter powercap: DTPM: Check for Energy Model type thermal: cooling: Check Energy Model type in cpufreq_cooling and devfreq_cooling Documentation: EM: Add artificial EM registration description PM: EM: Remove old debugfs files and print all 'flags' PM: EM: Change the order of arguments in the .active_power() callback PM: EM: Use the new .get_cost() callback while registering EM PM: EM: Add artificial EM flag PM: EM: Add .get_cost() callback * pm-cpuidle: cpuidle: riscv-sbi: Fix code to allow a genpd governor to be used cpuidle: psci: Fix regression leading to no genpd governor intel_idle: Add AlderLake support

thermal/drivers/thermal_hwmon: Use hwmon_device_register_for_thermal()

2022-05-22T18:32:31Z

The thermal subsystem registers a hwmon device without providing chip information or sysfs attribute groups. While undesirable, it would be difficult to change. On the other side, it abuses the hwmon_device_register_with_info API by not providing that information. Use new API specifically created for the thermal subsystem instead to let us enforce the 'chip' parameter for other callers of hwmon_device_register_with_info(). Acked-by: Rafael J . Wysocki Signed-off-by: Guenter Roeck